| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 1 Jul 2018 23:15:46 -0700
From: Wang Dongsheng <dongsheng.wang@...-semitech.com>
To: <andrew@...n.ch>
CC: <clemens.gruber@...ruber.com>, <davem@...emloft.net>,
<kstewart@...uxfoundation.org>, <pombredanne@...b.com>,
<tglx@...utronix.de>, <gregkh@...uxfoundation.org>,
<netdev@...r.kernel.org>,
Wang Dongsheng <dongsheng.wang@...-semitech.com>
Subject: [PATCH] net: phy: marvell: change default m88e1510 LED configuration
The m88e1121 LED default configuration does not apply m88e151x.
So add a function to relpace m88e1121 LED configuration.
Signed-off-by: Wang Dongsheng <dongsheng.wang@...-semitech.com>
---
drivers/net/phy/marvell.c | 54 ++++++++++++++++++++++++-------------
include/linux/marvell_phy.h | 2 ++
2 files changed, 38 insertions(+), 18 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b8f57e9b9379..1cd439bdf608 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -130,8 +130,9 @@
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
-#define MII_88E1121_PHY_LED_CTRL 16
+#define MII_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_DEF 0x0030
+#define MII_88E1510_PHY_LED_DEF 0x1177
#define MII_M1011_PHY_STATUS 0x11
#define MII_M1011_PHY_STATUS_1000 0x8000
@@ -632,8 +633,40 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
return err;
}
+static void marvell_config_led(struct phy_device *phydev)
+{
+ u16 def_config;
+ int err;
+
+ switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) {
+ /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
+ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1121R):
+ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1318S):
+ def_config = MII_88E1121_PHY_LED_DEF;
+ break;
+ /* Default PHY LED config:
+ * LED[0] .. 1000Mbps Link
+ * LED[1] .. 100Mbps Link
+ * LED[2] .. Blink, Activity
+ */
+ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510):
+ def_config = MII_88E1510_PHY_LED_DEF;
+ break;
+ default:
+ return;
+ }
+
+ err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
+ def_config);
+ if (err < 0)
+ pr_warn("Fail to config marvell phy LED.\n");
+}
+
static int marvell_config_init(struct phy_device *phydev)
{
+ /* Set defalut LED */
+ marvell_config_led(phydev);
+
/* Set registers from marvell,reg-init DT property */
return marvell_of_reg_init(phydev);
}
@@ -813,21 +846,6 @@ static int m88e1111_config_init(struct phy_device *phydev)
return genphy_soft_reset(phydev);
}
-static int m88e1121_config_init(struct phy_device *phydev)
-{
- int err;
-
- /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
- err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
- MII_88E1121_PHY_LED_CTRL,
- MII_88E1121_PHY_LED_DEF);
- if (err < 0)
- return err;
-
- /* Set marvell,reg-init configuration from device tree */
- return marvell_config_init(phydev);
-}
-
static int m88e1318_config_init(struct phy_device *phydev)
{
if (phy_interrupt_is_valid(phydev)) {
@@ -841,7 +859,7 @@ static int m88e1318_config_init(struct phy_device *phydev)
return err;
}
- return m88e1121_config_init(phydev);
+ return marvell_config_init(phydev);
}
static int m88e1510_config_init(struct phy_device *phydev)
@@ -2087,7 +2105,7 @@ static struct phy_driver marvell_drivers[] = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = &m88e1121_probe,
- .config_init = &m88e1121_config_init,
+ .config_init = &marvell_config_init,
.config_aneg = &m88e1121_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 4f5f8c21e283..1eb6f244588d 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -27,6 +27,8 @@
*/
#define MARVELL_PHY_ID_88E6390 0x01410f90
+#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4)
+
/* struct phy_device dev_flags definitions */
#define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001
#define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002
--
2.18.0
Powered by blists - more mailing lists