netdev - [PATCH net-next 0/3] mlxsw: ERSPAN: Take LACP state into consideration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180710070259.24753-1-idosch@mellanox.com>
Date:   Tue, 10 Jul 2018 10:02:56 +0300
From:   Ido Schimmel <idosch@...lanox.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, petrm@...lanox.com, jiri@...lanox.com,
        mlxsw@...lanox.com, Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 0/3] mlxsw: ERSPAN: Take LACP state into consideration

Petr says:

When offloading mirror-to-gretap, mlxsw needs to preroute the path that
the encapsulated packet will take. That path may include a LAG device
above a front panel port. So far, mlxsw resolved the path to the first
up front panel slave of the LAG interface, but that only reflects
administrative state of the port. It neglects to consider whether the
port actually has a carrier, and what the LACP state is. This patch set
aims to address these problems.

Patch #1 publishes team_port_get_rcu().

Then in patch #2, a new function is introduced,
mlxsw_sp_port_dev_check(). That returns, for a given netdevice that is a
slave of a LAG device, whether that device is "txable", i.e. whether the
LAG master would send traffic through it. Since there's no good place to
put LAG-wide helpers, introduce a new header include/net/lag.h.

Finally in patch #3, fix the slave selection logic to take into
consideration whether a given slave has a carrier and whether it is
txable.

Petr Machata (3):
  team: Publish team_port_get_rcu()
  net: Add lag.h, net_lag_port_dev_txable()
  mlxsw: spectrum_span: Change LAG lower selection

 drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c |  5 ++++-
 drivers/net/team/team.c                             |  5 -----
 include/linux/if_team.h                             | 18 ++++++++++++++++++
 include/net/bonding.h                               | 13 +++++++++++++
 include/net/lag.h                                   | 17 +++++++++++++++++
 5 files changed, 52 insertions(+), 6 deletions(-)
 create mode 100644 include/net/lag.h

-- 
2.14.4