netdev - [net 1/4] ixgbe: Be more careful when modifying MAC filters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180712152756.26015-2-jeffrey.t.kirsher@intel.com>
Date:   Thu, 12 Jul 2018 08:27:53 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Alexander Duyck <alexander.h.duyck@...el.com>,
        netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
        jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net 1/4] ixgbe: Be more careful when modifying MAC filters

From: Alexander Duyck <alexander.h.duyck@...el.com>

This change makes it so that we are much more explicit about the ordering
of updates to the receive address register (RAR) table. Prior to this patch
I believe we may have been updating the table while entries were still
active, or possibly allowing for reordering of things since we weren't
explicitly flushing writes to either the lower or upper portion of the
register prior to accessing the other half.

Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Reviewed-by: Shannon Nelson <shannon.nelson@...cle.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 3f5c350716bb..0bd1294ba517 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -1871,7 +1871,12 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
 	if (enable_addr != 0)
 		rar_high |= IXGBE_RAH_AV;
 
+	/* Record lower 32 bits of MAC address and then make
+	 * sure that write is flushed to hardware before writing
+	 * the upper 16 bits and setting the valid bit.
+	 */
 	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+	IXGBE_WRITE_FLUSH(hw);
 	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
 
 	return 0;
@@ -1903,8 +1908,13 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
 	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
 	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
 
-	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+	/* Clear the address valid bit and upper 16 bits of the address
+	 * before clearing the lower bits. This way we aren't updating
+	 * a live filter.
+	 */
 	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
 
 	/* clear VMDq pool/queue selection for this RAR */
 	hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
-- 
2.17.1