| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1531947878-9758-6-git-send-email-Bryan.Whitehead@microchip.com>
Date: Wed, 18 Jul 2018 17:04:35 -0400
From: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <UNGLinuxDriver@...rochip.com>
Subject: [PATCH v3 net-next 5/8] lan743x: Add support for ethtool eeprom access
Implement ethtool eeprom access
Also provides access to OTP (One Time Programming)
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/ethernet/microchip/lan743x_ethtool.c | 209 +++++++++++++++++++++++
drivers/net/ethernet/microchip/lan743x_main.h | 33 ++++
2 files changed, 242 insertions(+)
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index bab1344..f9ad237 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -7,6 +7,178 @@
#include <linux/pci.h>
#include <linux/phy.h>
+/* eeprom */
+#define LAN743X_EEPROM_MAGIC (0x74A5)
+#define LAN743X_OTP_MAGIC (0x74F3)
+#define EEPROM_INDICATOR_1 (0xA5)
+#define EEPROM_INDICATOR_2 (0xAA)
+#define EEPROM_MAC_OFFSET (0x01)
+#define MAX_EEPROM_SIZE 512
+#define OTP_INDICATOR_1 (0xF3)
+#define OTP_INDICATOR_2 (0xF7)
+
+static int lan743x_otp_write(struct lan743x_adapter *adapter, u32 offset,
+ u32 length, u8 *data)
+{
+ unsigned long timeout;
+ u32 buf;
+ int i;
+
+ buf = lan743x_csr_read(adapter, OTP_PWR_DN);
+
+ if (buf & OTP_PWR_DN_PWRDN_N_) {
+ /* clear it and wait to be cleared */
+ lan743x_csr_write(adapter, OTP_PWR_DN, 0);
+
+ timeout = jiffies + HZ;
+ do {
+ udelay(1);
+ buf = lan743x_csr_read(adapter, OTP_PWR_DN);
+ if (time_after(jiffies, timeout)) {
+ netif_warn(adapter, drv, adapter->netdev,
+ "timeout on OTP_PWR_DN completion\n");
+ return -EIO;
+ }
+ } while (buf & OTP_PWR_DN_PWRDN_N_);
+ }
+
+ /* set to BYTE program mode */
+ lan743x_csr_write(adapter, OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
+
+ for (i = 0; i < length; i++) {
+ lan743x_csr_write(adapter, OTP_ADDR1,
+ ((offset + i) >> 8) &
+ OTP_ADDR1_15_11_MASK_);
+ lan743x_csr_write(adapter, OTP_ADDR2,
+ ((offset + i) &
+ OTP_ADDR2_10_3_MASK_));
+ lan743x_csr_write(adapter, OTP_PRGM_DATA, data[i]);
+ lan743x_csr_write(adapter, OTP_TST_CMD, OTP_TST_CMD_PRGVRFY_);
+ lan743x_csr_write(adapter, OTP_CMD_GO, OTP_CMD_GO_GO_);
+
+ timeout = jiffies + HZ;
+ do {
+ udelay(1);
+ buf = lan743x_csr_read(adapter, OTP_STATUS);
+ if (time_after(jiffies, timeout)) {
+ netif_warn(adapter, drv, adapter->netdev,
+ "Timeout on OTP_STATUS completion\n");
+ return -EIO;
+ }
+ } while (buf & OTP_STATUS_BUSY_);
+ }
+
+ return 0;
+}
+
+static int lan743x_eeprom_wait(struct lan743x_adapter *adapter)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+
+ do {
+ val = lan743x_csr_read(adapter, E2P_CMD);
+
+ if (!(val & E2P_CMD_EPC_BUSY_) ||
+ (val & E2P_CMD_EPC_TIMEOUT_))
+ break;
+ usleep_range(40, 100);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ if (val & (E2P_CMD_EPC_TIMEOUT_ | E2P_CMD_EPC_BUSY_)) {
+ netif_warn(adapter, drv, adapter->netdev,
+ "EEPROM read operation timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int lan743x_eeprom_confirm_not_busy(struct lan743x_adapter *adapter)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+
+ do {
+ val = lan743x_csr_read(adapter, E2P_CMD);
+
+ if (!(val & E2P_CMD_EPC_BUSY_))
+ return 0;
+
+ usleep_range(40, 100);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ netif_warn(adapter, drv, adapter->netdev, "EEPROM is busy\n");
+ return -EIO;
+}
+
+static int lan743x_eeprom_read(struct lan743x_adapter *adapter,
+ u32 offset, u32 length, u8 *data)
+{
+ int retval;
+ u32 val;
+ int i;
+
+ retval = lan743x_eeprom_confirm_not_busy(adapter);
+ if (retval)
+ return retval;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_;
+ val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
+ lan743x_csr_write(adapter, E2P_CMD, val);
+
+ retval = lan743x_eeprom_wait(adapter);
+ if (retval < 0)
+ return retval;
+
+ val = lan743x_csr_read(adapter, E2P_DATA);
+ data[i] = val & 0xFF;
+ offset++;
+ }
+
+ return 0;
+}
+
+static int lan743x_eeprom_write(struct lan743x_adapter *adapter,
+ u32 offset, u32 length, u8 *data)
+{
+ int retval;
+ u32 val;
+ int i;
+
+ retval = lan743x_eeprom_confirm_not_busy(adapter);
+ if (retval)
+ return retval;
+
+ /* Issue write/erase enable command */
+ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_;
+ lan743x_csr_write(adapter, E2P_CMD, val);
+
+ retval = lan743x_eeprom_wait(adapter);
+ if (retval < 0)
+ return retval;
+
+ for (i = 0; i < length; i++) {
+ /* Fill data register */
+ val = data[i];
+ lan743x_csr_write(adapter, E2P_DATA, val);
+
+ /* Send "write" command */
+ val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_;
+ val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
+ lan743x_csr_write(adapter, E2P_CMD, val);
+
+ retval = lan743x_eeprom_wait(adapter);
+ if (retval < 0)
+ return retval;
+
+ offset++;
+ }
+
+ return 0;
+}
+
static void lan743x_ethtool_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info)
{
@@ -32,6 +204,40 @@ static void lan743x_ethtool_set_msglevel(struct net_device *netdev,
adapter->msg_enable = msglevel;
}
+static int lan743x_ethtool_get_eeprom_len(struct net_device *netdev)
+{
+ return MAX_EEPROM_SIZE;
+}
+
+static int lan743x_ethtool_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ return lan743x_eeprom_read(adapter, ee->offset, ee->len, data);
+}
+
+static int lan743x_ethtool_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ int ret = -EINVAL;
+
+ if (ee->magic == LAN743X_EEPROM_MAGIC)
+ ret = lan743x_eeprom_write(adapter, ee->offset, ee->len,
+ data);
+ /* Beware! OTP is One Time Programming ONLY!
+ * So do some strict condition check before messing up
+ */
+ else if ((ee->magic == LAN743X_OTP_MAGIC) &&
+ (ee->offset == 0) &&
+ (ee->len == MAX_EEPROM_SIZE) &&
+ (data[0] == OTP_INDICATOR_1))
+ ret = lan743x_otp_write(adapter, ee->offset, ee->len, data);
+
+ return ret;
+}
+
static const char lan743x_set0_hw_cnt_strings[][ETH_GSTRING_LEN] = {
"RX FCS Errors",
"RX Alignment Errors",
@@ -215,6 +421,9 @@ const struct ethtool_ops lan743x_ethtool_ops = {
.set_msglevel = lan743x_ethtool_set_msglevel,
.get_link = ethtool_op_get_link,
+ .get_eeprom_len = lan743x_ethtool_get_eeprom_len,
+ .get_eeprom = lan743x_ethtool_get_eeprom,
+ .set_eeprom = lan743x_ethtool_set_eeprom,
.get_strings = lan743x_ethtool_get_strings,
.get_ethtool_stats = lan743x_ethtool_get_ethtool_stats,
.get_sset_count = lan743x_ethtool_get_sset_count,
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index de4f2cc..c026b8d 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -42,6 +42,16 @@
#define DP_DATA_0 (0x030)
+#define E2P_CMD (0x040)
+#define E2P_CMD_EPC_BUSY_ BIT(31)
+#define E2P_CMD_EPC_CMD_WRITE_ (0x30000000)
+#define E2P_CMD_EPC_CMD_EWEN_ (0x20000000)
+#define E2P_CMD_EPC_CMD_READ_ (0x00000000)
+#define E2P_CMD_EPC_TIMEOUT_ BIT(10)
+#define E2P_CMD_EPC_ADDR_MASK_ (0x000001FF)
+
+#define E2P_DATA (0x044)
+
#define FCT_RX_CTL (0xAC)
#define FCT_RX_CTL_EN_(channel) BIT(28 + (channel))
#define FCT_RX_CTL_DIS_(channel) BIT(24 + (channel))
@@ -288,6 +298,29 @@
#define TX_CFG_C_TX_DMA_INT_STS_AUTO_CLR_ BIT(3)
#define TX_CFG_C_TX_INT_STS_R2C_MODE_MASK_ (0x00000007)
+#define OTP_PWR_DN (0x1000)
+#define OTP_PWR_DN_PWRDN_N_ BIT(0)
+
+#define OTP_ADDR1 (0x1004)
+#define OTP_ADDR1_15_11_MASK_ (0x1F)
+
+#define OTP_ADDR2 (0x1008)
+#define OTP_ADDR2_10_3_MASK_ (0xFF)
+
+#define OTP_PRGM_DATA (0x1010)
+
+#define OTP_PRGM_MODE (0x1014)
+#define OTP_PRGM_MODE_BYTE_ BIT(0)
+
+#define OTP_TST_CMD (0x1024)
+#define OTP_TST_CMD_PRGVRFY_ BIT(3)
+
+#define OTP_CMD_GO (0x1028)
+#define OTP_CMD_GO_GO_ BIT(0)
+
+#define OTP_STATUS (0x1030)
+#define OTP_STATUS_BUSY_ BIT(0)
+
/* MAC statistics registers */
#define STAT_RX_FCS_ERRORS (0x1200)
#define STAT_RX_ALIGNMENT_ERRORS (0x1204)
--
2.7.4
Powered by blists - more mailing lists