[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180721191358.13952-1-hauke@hauke-m.de>
Date: Sat, 21 Jul 2018 21:13:54 +0200
From: Hauke Mehrtens <hauke@...ke-m.de>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, andrew@...n.ch,
vivien.didelot@...oirfairelinux.com, f.fainelli@...il.com,
john@...ozen.org, linux-mips@...ux-mips.org, dev@...sin.me,
hauke.mehrtens@...el.com, Hauke Mehrtens <hauke@...ke-m.de>
Subject: [PATCH 0/4] net: Add support for Lantiq / Intel vrx200 network
This adds basic support for the GSWIP (Gigabit Switch) found in the
VRX200 SoC.
There are different versions of this IP core used in different SoCs, but
this driver was currently only tested on the VRX200 SoC line, for other
SoCs this driver probably need some adoptions to work.
I also plan to add Layer 2 offloading to the DSA driver and later also
layer 3 offloading which is supported by the PPE HW block.
Hauke Mehrtens (4):
MIPS: lantiq: Do not enable IRQs in dma open
net: dsa: Add Lantiq / Intel GSWIP tag support
net: lantiq: Add Lantiq / Intel vrx200 Ethernet driver
net: dsa: Add Lantiq / Intel DSA driver for vrx200
MAINTAINERS | 9 +
arch/mips/lantiq/xway/dma.c | 1 -
arch/mips/lantiq/xway/sysctrl.c | 2 +-
drivers/net/dsa/Kconfig | 8 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/lantiq-gswip.c | 750 +++++++++++++++++++++++++++++++++++
drivers/net/dsa/lantiq_pce.h | 153 +++++++
drivers/net/ethernet/Kconfig | 6 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/lantiq_etop.c | 1 +
drivers/net/ethernet/lantiq_xrx200.c | 609 ++++++++++++++++++++++++++++
include/net/dsa.h | 1 +
net/dsa/Kconfig | 3 +
net/dsa/Makefile | 1 +
net/dsa/dsa.c | 3 +
net/dsa/dsa_priv.h | 3 +
net/dsa/tag_gswip.c | 110 +++++
17 files changed, 1660 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/dsa/lantiq-gswip.c
create mode 100644 drivers/net/dsa/lantiq_pce.h
create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
create mode 100644 net/dsa/tag_gswip.c
--
2.11.0
Powered by blists - more mailing lists