lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180723212634.3219-4-ivan.khoronzhuk@linaro.org>
Date:   Tue, 24 Jul 2018 00:26:31 +0300
From:   Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
To:     davem@...emloft.net, grygorii.strashko@...com
Cc:     corbet@....net, akpm@...ux-foundation.org, netdev@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, vinicius.gomes@...el.com,
        henrik@...tad.us, jesus.sanchez-palencia@...el.com,
        ilias.apalodimas@...aro.org, p-varis@...com, spatton@...com,
        francois.ozog@...aro.org, yogeshs@...com, nsekhar@...com,
        andrew@...n.ch, Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
Subject: [PATCH v5 net-next 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload

That's possible to offload vlan to tc priority mapping with
assumption sk_prio == L2 prio.

Example:
$ ethtool -L eth0 rx 1 tx 4

$ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1

$ tc -g class show dev eth0
+---(100:ffe2) mqprio
|    +---(100:3) mqprio
|    +---(100:4) mqprio
|    
+---(100:ffe1) mqprio
|    +---(100:2) mqprio
|    
+---(100:ffe0) mqprio
     +---(100:1) mqprio

Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3
txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2
The offload part only maps L2 prio to classes of traffic, but not
to transmit queues, so to direct traffic to traffic class vlan has
to be created with appropriate egress map.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@...aro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@...com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
---
 drivers/net/ethernet/ti/cpsw.c | 82 ++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 4425b537b9dd..f099e0ed138d 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -39,6 +39,7 @@
 #include <linux/sys_soc.h>
 
 #include <linux/pinctrl/consumer.h>
+#include <net/pkt_cls.h>
 
 #include "cpsw.h"
 #include "cpsw_ale.h"
@@ -153,6 +154,8 @@ do {								\
 #define IRQ_NUM			2
 #define CPSW_MAX_QUEUES		8
 #define CPSW_CPDMA_DESCS_POOL_SIZE_DEFAULT 256
+#define CPSW_TC_NUM			4
+#define CPSW_FIFO_SHAPERS_NUM		(CPSW_TC_NUM - 1)
 
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT	29
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK		GENMASK(2, 0)
@@ -454,6 +457,7 @@ struct cpsw_priv {
 	u8				mac_addr[ETH_ALEN];
 	bool				rx_pause;
 	bool				tx_pause;
+	bool				mqprio_hw;
 	u32 emac_port;
 	struct cpsw_common *cpsw;
 };
@@ -1578,6 +1582,14 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_common *cpsw)
 	soft_reset_slave(slave);
 }
 
+static int cpsw_tc_to_fifo(int tc, int num_tc)
+{
+	if (tc == num_tc - 1)
+		return 0;
+
+	return CPSW_FIFO_SHAPERS_NUM - tc;
+}
+
 static int cpsw_ndo_open(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
@@ -2191,6 +2203,75 @@ static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
 	return ret;
 }
 
+static int cpsw_set_mqprio(struct net_device *ndev, void *type_data)
+{
+	struct tc_mqprio_qopt_offload *mqprio = type_data;
+	struct cpsw_priv *priv = netdev_priv(ndev);
+	struct cpsw_common *cpsw = priv->cpsw;
+	int fifo, num_tc, count, offset;
+	struct cpsw_slave *slave;
+	u32 tx_prio_map = 0;
+	int i, tc, ret;
+
+	num_tc = mqprio->qopt.num_tc;
+	if (num_tc > CPSW_TC_NUM)
+		return -EINVAL;
+
+	if (mqprio->mode != TC_MQPRIO_MODE_DCB)
+		return -EINVAL;
+
+	ret = pm_runtime_get_sync(cpsw->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(cpsw->dev);
+		return ret;
+	}
+
+	if (num_tc) {
+		for (i = 0; i < 8; i++) {
+			tc = mqprio->qopt.prio_tc_map[i];
+			fifo = cpsw_tc_to_fifo(tc, num_tc);
+			tx_prio_map |= fifo << (4 * i);
+		}
+
+		netdev_set_num_tc(ndev, num_tc);
+		for (i = 0; i < num_tc; i++) {
+			count = mqprio->qopt.count[i];
+			offset = mqprio->qopt.offset[i];
+			netdev_set_tc_queue(ndev, i, count, offset);
+		}
+	}
+
+	if (!mqprio->qopt.hw) {
+		/* restore default configuration */
+		netdev_reset_tc(ndev);
+		tx_prio_map = TX_PRIORITY_MAPPING;
+	}
+
+	priv->mqprio_hw = mqprio->qopt.hw;
+
+	offset = cpsw->version == CPSW_VERSION_1 ?
+		 CPSW1_TX_PRI_MAP : CPSW2_TX_PRI_MAP;
+
+	slave = &cpsw->slaves[cpsw_slave_index(cpsw, priv)];
+	slave_write(slave, tx_prio_map, offset);
+
+	pm_runtime_put_sync(cpsw->dev);
+
+	return 0;
+}
+
+static int cpsw_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
+			     void *type_data)
+{
+	switch (type) {
+	case TC_SETUP_QDISC_MQPRIO:
+		return cpsw_set_mqprio(ndev, type_data);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct net_device_ops cpsw_netdev_ops = {
 	.ndo_open		= cpsw_ndo_open,
 	.ndo_stop		= cpsw_ndo_stop,
@@ -2206,6 +2287,7 @@ static const struct net_device_ops cpsw_netdev_ops = {
 #endif
 	.ndo_vlan_rx_add_vid	= cpsw_ndo_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= cpsw_ndo_vlan_rx_kill_vid,
+	.ndo_setup_tc           = cpsw_ndo_setup_tc,
 };
 
 static int cpsw_get_regs_len(struct net_device *ndev)
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ