[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180723125843.391-1-mkl@pengutronix.de>
Date: Mon, 23 Jul 2018 14:58:31 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, linux-can@...r.kernel.org,
kernel@...gutronix.de
Subject: pull-request: can 2018-07-23
Hello David,
this is a pull request of 12 patches for net/master.
The patch by Stephane Grosjean for the peak_canfd CAN driver fixes a problem
with older firmware. The next patch is by Roman Fietze and fixes the setup of
the CCCR register in the m_can driver. Nicholas Mc Guire's patch for the
mpc5xxx_can driver adds missing error checking. The two patches by Faiz Abbas
fix the runtime resume and clean up the probe function in the m_can driver. The
last 7 patches by Anssi Hannula fix several problem in the xilinx_can driver.
regards,
Marc
---
The following changes since commit c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c:
net: prevent ISA drivers from building on PPC32 (2018-07-22 11:12:29 -0700)
are available in the Git repository at:
ssh://git@...olite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git tags/linux-can-fixes-for-4.18-20180723
for you to fetch changes up to 8ebd83bdb027f29870d96649dba18b91581ea829:
can: xilinx_can: fix power management handling (2018-07-23 14:34:46 +0200)
----------------------------------------------------------------
linux-can-fixes-for-4.18-20180723
----------------------------------------------------------------
Anssi Hannula (7):
can: xilinx_can: fix device dropping off bus on RX overrun
can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK
can: xilinx_can: fix recovery from error states not being propagated
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
can: xilinx_can: fix RX overflow interrupt not being enabled
can: xilinx_can: fix incorrect clear of non-processed interrupts
can: xilinx_can: fix power management handling
Faiz Abbas (2):
can: m_can: Fix runtime resume call
can: m_can: Move accessing of message ram to after clocks are enabled
Nicholas Mc Guire (1):
can: mpc5xxx_can: check of_iomap return before use
Roman Fietze (1):
can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before checking can.ctrlmode
Stephane Grosjean (1):
can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr only
drivers/net/can/m_can/m_can.c | 18 +-
drivers/net/can/mscan/mpc5xxx_can.c | 5 +
drivers/net/can/peak_canfd/peak_pciefd_main.c | 19 ++
drivers/net/can/xilinx_can.c | 392 +++++++++++++++++++-------
4 files changed, 321 insertions(+), 113 deletions(-)
Powered by blists - more mailing lists