[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CALzJLG_Mh2xWwZzWWO5YnKmQyan=RVrLLtrPJHUFAvd-xKoVpA@mail.gmail.com>
Date: Tue, 24 Jul 2018 17:35:11 -0700
From: Saeed Mahameed <saeedm@....mellanox.co.il>
To: Alexander Duyck <alexander.duyck@...il.com>
Cc: Saeed Mahameed <saeedm@...lanox.com>,
"David S. Miller" <davem@...emloft.net>,
Netdev <netdev@...r.kernel.org>,
Boris Pismenny <borisp@...lanox.com>
Subject: Re: [net-next V2 12/12] net/mlx5e: Use PARTIAL_GSO for UDP segmentation
On Tue, Jul 24, 2018 at 7:53 AM, Alexander Duyck
<alexander.duyck@...il.com> wrote:
> On Mon, Jul 23, 2018 at 3:11 PM, Saeed Mahameed <saeedm@...lanox.com> wrote:
>> From: Boris Pismenny <borisp@...lanox.com>
>>
>> This patch removes the splitting of UDP_GSO_L4 packets in the driver,
>> and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack
>> is not responsible for splitting the packet into two.
>>
>> Signed-off-by: Boris Pismenny <borisp@...lanox.com>
>> Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
>> ---
>> .../net/ethernet/mellanox/mlx5/core/Makefile | 4 +-
>> .../mellanox/mlx5/core/en_accel/en_accel.h | 27 +++--
>> .../mellanox/mlx5/core/en_accel/rxtx.c | 109 ------------------
>> .../mellanox/mlx5/core/en_accel/rxtx.h | 14 ---
>> .../net/ethernet/mellanox/mlx5/core/en_main.c | 9 +-
>> 5 files changed, 23 insertions(+), 140 deletions(-)
>> delete mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
>> delete mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h
>>
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>> index 55d5a5c2e9d8..fa7fcca5dc78 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
>> @@ -14,8 +14,8 @@ mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
>> fpga/ipsec.o fpga/tls.o
>>
>> mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
>> - en_tx.o en_rx.o en_dim.o en_txrx.o en_accel/rxtx.o en_stats.o \
>> - vxlan.o en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
>> + en_tx.o en_rx.o en_dim.o en_txrx.o en_stats.o vxlan.o \
>> + en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
>>
>> mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
>>
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
>> index 39a5d13ba459..1dd225380a66 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
>> @@ -38,14 +38,22 @@
>> #include <linux/netdevice.h>
>> #include "en_accel/ipsec_rxtx.h"
>> #include "en_accel/tls_rxtx.h"
>> -#include "en_accel/rxtx.h"
>> #include "en.h"
>>
>> -static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
>> - struct mlx5e_txqsq *sq,
>> - struct net_device *dev,
>> - struct mlx5e_tx_wqe **wqe,
>> - u16 *pi)
>> +static inline void
>> +mlx5e_udp_gso_handle_tx_skb(struct sk_buff *skb)
>> +{
>> + int payload_len = skb_shinfo(skb)->gso_size + sizeof(struct udphdr);
>> +
>> + udp_hdr(skb)->len = htons(payload_len);
>> +}
>> +
>
> So it looks like you decided to just update the length here. Do you
> still have plans to update GSO_PARTIAL to set the length this way or
> have you decided to just leave it as it is?
>
I don't know what are Boris's plans regarding this, I will let him answer that.
But what is your take on this ?
>> +static inline struct sk_buff *
>> +mlx5e_accel_handle_tx(struct sk_buff *skb,
>> + struct mlx5e_txqsq *sq,
>> + struct net_device *dev,
>> + struct mlx5e_tx_wqe **wqe,
>> + u16 *pi)
>> {
>> #ifdef CONFIG_MLX5_EN_TLS
>> if (test_bit(MLX5E_SQ_STATE_TLS, &sq->state)) {
>> @@ -63,11 +71,8 @@ static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
>> }
>> #endif
>>
>> - if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
>> - skb = mlx5e_udp_gso_handle_tx_skb(dev, sq, skb, wqe, pi);
>> - if (unlikely(!skb))
>> - return NULL;
>> - }
>> + if (skb_is_gso(skb) && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)
>> + mlx5e_udp_gso_handle_tx_skb(skb);
>>
>> return skb;
>> }
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
>> deleted file mode 100644
>> index 7b7ec3998e84..000000000000
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
>> +++ /dev/null
>> @@ -1,109 +0,0 @@
>> -#include "en_accel/rxtx.h"
>> -
>> -static void mlx5e_udp_gso_prepare_last_skb(struct sk_buff *skb,
>> - struct sk_buff *nskb,
>> - int remaining)
>> -{
>> - int bytes_needed = remaining, remaining_headlen, remaining_page_offset;
>> - int headlen = skb_transport_offset(skb) + sizeof(struct udphdr);
>> - int payload_len = remaining + sizeof(struct udphdr);
>> - int k = 0, i, j;
>> -
>> - skb_copy_bits(skb, 0, nskb->data, headlen);
>> - nskb->dev = skb->dev;
>> - skb_reset_mac_header(nskb);
>> - skb_set_network_header(nskb, skb_network_offset(skb));
>> - skb_set_transport_header(nskb, skb_transport_offset(skb));
>> - skb_set_tail_pointer(nskb, headlen);
>> -
>> - /* How many frags do we need? */
>> - for (i = skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) {
>> - bytes_needed -= skb_frag_size(&skb_shinfo(skb)->frags[i]);
>> - k++;
>> - if (bytes_needed <= 0)
>> - break;
>> - }
>> -
>> - /* Fill the first frag and split it if necessary */
>> - j = skb_shinfo(skb)->nr_frags - k;
>> - remaining_page_offset = -bytes_needed;
>> - skb_fill_page_desc(nskb, 0,
>> - skb_shinfo(skb)->frags[j].page.p,
>> - skb_shinfo(skb)->frags[j].page_offset + remaining_page_offset,
>> - skb_shinfo(skb)->frags[j].size - remaining_page_offset);
>> -
>> - skb_frag_ref(skb, j);
>> -
>> - /* Fill the rest of the frags */
>> - for (i = 1; i < k; i++) {
>> - j = skb_shinfo(skb)->nr_frags - k + i;
>> -
>> - skb_fill_page_desc(nskb, i,
>> - skb_shinfo(skb)->frags[j].page.p,
>> - skb_shinfo(skb)->frags[j].page_offset,
>> - skb_shinfo(skb)->frags[j].size);
>> - skb_frag_ref(skb, j);
>> - }
>> - skb_shinfo(nskb)->nr_frags = k;
>> -
>> - remaining_headlen = remaining - skb->data_len;
>> -
>> - /* headlen contains remaining data? */
>> - if (remaining_headlen > 0)
>> - skb_copy_bits(skb, skb->len - remaining, nskb->data + headlen,
>> - remaining_headlen);
>> - nskb->len = remaining + headlen;
>> - nskb->data_len = payload_len - sizeof(struct udphdr) +
>> - max_t(int, 0, remaining_headlen);
>> - nskb->protocol = skb->protocol;
>> - if (nskb->protocol == htons(ETH_P_IP)) {
>> - ip_hdr(nskb)->id = htons(ntohs(ip_hdr(nskb)->id) +
>> - skb_shinfo(skb)->gso_segs);
>> - ip_hdr(nskb)->tot_len =
>> - htons(payload_len + sizeof(struct iphdr));
>> - } else {
>> - ipv6_hdr(nskb)->payload_len = htons(payload_len);
>> - }
>> - udp_hdr(nskb)->len = htons(payload_len);
>> - skb_shinfo(nskb)->gso_size = 0;
>> - nskb->ip_summed = skb->ip_summed;
>> - nskb->csum_start = skb->csum_start;
>> - nskb->csum_offset = skb->csum_offset;
>> - nskb->queue_mapping = skb->queue_mapping;
>> -}
>> -
>> -/* might send skbs and update wqe and pi */
>> -struct sk_buff *mlx5e_udp_gso_handle_tx_skb(struct net_device *netdev,
>> - struct mlx5e_txqsq *sq,
>> - struct sk_buff *skb,
>> - struct mlx5e_tx_wqe **wqe,
>> - u16 *pi)
>> -{
>> - int payload_len = skb_shinfo(skb)->gso_size + sizeof(struct udphdr);
>> - int headlen = skb_transport_offset(skb) + sizeof(struct udphdr);
>> - int remaining = (skb->len - headlen) % skb_shinfo(skb)->gso_size;
>> - struct sk_buff *nskb;
>> -
>> - if (skb->protocol == htons(ETH_P_IP))
>> - ip_hdr(skb)->tot_len = htons(payload_len + sizeof(struct iphdr));
>> - else
>> - ipv6_hdr(skb)->payload_len = htons(payload_len);
>> - udp_hdr(skb)->len = htons(payload_len);
>> - if (!remaining)
>> - return skb;
>> -
>> - sq->stats->udp_seg_rem++;
>> - nskb = alloc_skb(max_t(int, headlen, headlen + remaining - skb->data_len), GFP_ATOMIC);
>> - if (unlikely(!nskb)) {
>> - sq->stats->dropped++;
>> - return NULL;
>> - }
>> -
>> - mlx5e_udp_gso_prepare_last_skb(skb, nskb, remaining);
>> -
>> - skb_shinfo(skb)->gso_segs--;
>> - pskb_trim(skb, skb->len - remaining);
>> - mlx5e_sq_xmit(sq, skb, *wqe, *pi);
>> - mlx5e_sq_fetch_wqe(sq, wqe, pi);
>> - return nskb;
>> -}
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h
>> deleted file mode 100644
>> index ed42699a78b3..000000000000
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h
>> +++ /dev/null
>> @@ -1,14 +0,0 @@
>> -
>> -#ifndef __MLX5E_EN_ACCEL_RX_TX_H__
>> -#define __MLX5E_EN_ACCEL_RX_TX_H__
>> -
>> -#include <linux/skbuff.h>
>> -#include "en.h"
>> -
>> -struct sk_buff *mlx5e_udp_gso_handle_tx_skb(struct net_device *netdev,
>> - struct mlx5e_txqsq *sq,
>> - struct sk_buff *skb,
>> - struct mlx5e_tx_wqe **wqe,
>> - u16 *pi);
>> -
>> -#endif
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>> index 712b9766485f..dccde18f6170 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
>> @@ -4538,7 +4538,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
>> netdev->hw_features |= NETIF_F_HW_VLAN_STAG_TX;
>>
>> if (mlx5e_vxlan_allowed(mdev) || MLX5_CAP_ETH(mdev, tunnel_stateless_gre)) {
>> - netdev->hw_features |= NETIF_F_GSO_PARTIAL;
>> netdev->hw_enc_features |= NETIF_F_IP_CSUM;
>> netdev->hw_enc_features |= NETIF_F_IPV6_CSUM;
>> netdev->hw_enc_features |= NETIF_F_TSO;
>> @@ -4563,6 +4562,11 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
>> NETIF_F_GSO_GRE_CSUM;
>> }
>>
>> + netdev->hw_features |= NETIF_F_GSO_PARTIAL;
>> + netdev->gso_partial_features |= NETIF_F_GSO_UDP_L4;
>> + netdev->hw_features |= NETIF_F_GSO_UDP_L4;
>> + netdev->features |= NETIF_F_GSO_UDP_L4;
>> +
>
> Isn't the setting of netdev->features going to be overwritten when you
> do the "netdev->features = netdev->hw_features" assignment a little
> further down in the function?
>
Yes, nice catch, the line "netdev->features |= NETIF_F_GSO_UDP_L4;"
above is redundant.
we will clean it up later.
Thanks Alex!
>> mlx5_query_port_fcs(mdev, &fcs_supported, &fcs_enabled);
>>
>> if (fcs_supported)
>> @@ -4595,9 +4599,6 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
>> netdev->features |= NETIF_F_HIGHDMA;
>> netdev->features |= NETIF_F_HW_VLAN_STAG_FILTER;
>>
>> - netdev->features |= NETIF_F_GSO_UDP_L4;
>> - netdev->hw_features |= NETIF_F_GSO_UDP_L4;
>> -
>> netdev->priv_flags |= IFF_UNICAST_FLT;
>>
>> mlx5e_set_netdev_dev_addr(netdev);
>> --
>> 2.17.0
>>
Powered by blists - more mailing lists