[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6188441f-670d-7644-361b-7a5e8e06c9c2@broadcom.com>
Date: Thu, 26 Jul 2018 12:16:52 -0700
From: Arun Parameswaran <arun.parameswaran@...adcom.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com
Subject: Re: [PATCH 2/7] net: phy: Fix the register offsets in Broadcom iProc
mdio mux driver
On 18-07-26 12:06 PM, Andrew Lunn wrote:
> On Thu, Jul 26, 2018 at 11:36:19AM -0700, Arun Parameswaran wrote:
>> Modify the register offsets in the Broadcom iProc mdio mux to start
>> from the top of the register address space.
>>
>> Earlier the base address specified was from the middle of the block's
>> register space. The base address will now point to the start of the
>> mdio's address space. The offsets have been fixed to match this.
>
> Hi Arun
>
> Did you consider a change something like:
That looks good. I will make this change to the patch.
Thanks
Arun
>
> diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
> index 0831b7142df7..2d53e609498c 100644
> --- a/drivers/net/phy/mdio-mux-bcm-iproc.c
> +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
> @@ -169,6 +169,12 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
> md->dev = &pdev->dev;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + if (res->start & 0xfff != 0) {
> + dev_info(&pdev->dev, "Please upgrade your device tree blob.\n");
> + res->start &= ~0xfff;
> + }
> +
> md->base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(md->base)) {
> dev_err(&pdev->dev, "failed to ioremap register\n");
>
>
> Andrew
>
Powered by blists - more mailing lists