[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180730130236.3837-1-quentin.schulz@bootlin.com>
Date: Mon, 30 Jul 2018 15:02:33 +0200
From: Quentin Schulz <quentin.schulz@...tlin.com>
To: andrew@...n.ch, f.fainelli@...il.com, davem@...emloft.net,
robh+dt@...nel.org, mark.rutland@....com,
devicetree@...r.kernel.org
Cc: netdev@...r.kernel.org, alexandre.belloni@...tlin.com,
linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com,
Quentin Schulz <quentin.schulz@...tlin.com>
Subject: [PATCH net-next 1/4] net: phy: mscc: factorize code for LEDs mode
LEDs modes are set the same way, except they are offset by 4 times the
index of the LED.
Let's factorize all the code so that it's easier to add support for the
4 LEDs of the VSC8584 PHY.
Signed-off-by: Quentin Schulz <quentin.schulz@...tlin.com>
---
drivers/net/phy/mscc.c | 66 ++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 34 deletions(-)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 84ca9ff40ae0..02954cc0d2ad 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -54,9 +54,9 @@ enum rgmii_rx_clock_delay {
#define HP_AUTO_MDIX_X_OVER_IND_MASK 0x2000
#define MSCC_PHY_LED_MODE_SEL 29
-#define LED_1_MODE_SEL_MASK 0x00F0
-#define LED_0_MODE_SEL_MASK 0x000F
-#define LED_1_MODE_SEL_POS 4
+#define LED_MODE_SEL_POS(x) ((x) * 4)
+#define LED_MODE_SEL_MASK(x) (GENMASK(3, 0) << LED_MODE_SEL_POS(x))
+#define LED_MODE_SEL(x, mode) (((mode) << LED_MODE_SEL_POS(x)) & LED_MODE_SEL_MASK(x))
#define MSCC_EXT_PAGE_ACCESS 31
#define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */
@@ -103,10 +103,11 @@ enum rgmii_rx_clock_delay {
#define DOWNSHIFT_COUNT_MAX 5
+#define MAX_LEDS 4
struct vsc8531_private {
int rate_magic;
- u8 led_0_mode;
- u8 led_1_mode;
+ u8 leds_mode[MAX_LEDS];
+ u8 nleds;
};
#ifdef CONFIG_OF_MDIO
@@ -140,14 +141,8 @@ static int vsc85xx_led_cntl_set(struct phy_device *phydev,
mutex_lock(&phydev->lock);
reg_val = phy_read(phydev, MSCC_PHY_LED_MODE_SEL);
- if (led_num) {
- reg_val &= ~LED_1_MODE_SEL_MASK;
- reg_val |= (((u16)mode << LED_1_MODE_SEL_POS) &
- LED_1_MODE_SEL_MASK);
- } else {
- reg_val &= ~LED_0_MODE_SEL_MASK;
- reg_val |= ((u16)mode & LED_0_MODE_SEL_MASK);
- }
+ reg_val &= ~LED_MODE_SEL_MASK(led_num);
+ reg_val |= LED_MODE_SEL(led_num, (u16)mode);
rc = phy_write(phydev, MSCC_PHY_LED_MODE_SEL, reg_val);
mutex_unlock(&phydev->lock);
@@ -545,7 +540,7 @@ static int vsc85xx_set_tunable(struct phy_device *phydev,
static int vsc85xx_config_init(struct phy_device *phydev)
{
- int rc;
+ int rc, i;
struct vsc8531_private *vsc8531 = phydev->priv;
rc = vsc85xx_default_config(phydev);
@@ -560,13 +555,12 @@ static int vsc85xx_config_init(struct phy_device *phydev)
if (rc)
return rc;
- rc = vsc85xx_led_cntl_set(phydev, 1, vsc8531->led_1_mode);
- if (rc)
- return rc;
-
- rc = vsc85xx_led_cntl_set(phydev, 0, vsc8531->led_0_mode);
- if (rc)
- return rc;
+ /* Support for only 2 LEDs */
+ for (i = 0; i < vsc8531->nleds; i++) {
+ rc = vsc85xx_led_cntl_set(phydev, i, vsc8531->leds_mode[i]);
+ if (rc)
+ return rc;
+ }
rc = genphy_config_init(phydev);
@@ -627,6 +621,10 @@ static int vsc85xx_probe(struct phy_device *phydev)
struct vsc8531_private *vsc8531;
int rate_magic;
int led_mode;
+ int i;
+ char led_dt_prop[19];
+ u8 default_mode[2] = {VSC8531_LINK_1000_ACTIVITY,
+ VSC8531_LINK_100_ACTIVITY};
rate_magic = vsc85xx_edge_rate_magic_get(phydev);
if (rate_magic < 0)
@@ -639,19 +637,19 @@ static int vsc85xx_probe(struct phy_device *phydev)
phydev->priv = vsc8531;
vsc8531->rate_magic = rate_magic;
-
- /* LED[0] and LED[1] mode */
- led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-0-mode",
- VSC8531_LINK_1000_ACTIVITY);
- if (led_mode < 0)
- return led_mode;
- vsc8531->led_0_mode = led_mode;
-
- led_mode = vsc85xx_dt_led_mode_get(phydev, "vsc8531,led-1-mode",
- VSC8531_LINK_100_ACTIVITY);
- if (led_mode < 0)
- return led_mode;
- vsc8531->led_1_mode = led_mode;
+ vsc8531->nleds = 2;
+
+ for (i = 0; i < vsc8531->nleds; i++) {
+ led_mode = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i);
+ if (led_mode < 0)
+ return led_mode;
+
+ led_mode = vsc85xx_dt_led_mode_get(phydev, led_dt_prop,
+ default_mode[i]);
+ if (led_mode < 0)
+ return led_mode;
+ vsc8531->leds_mode[i] = led_mode;
+ }
return 0;
}
--
2.17.1
Powered by blists - more mailing lists