| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <39b57ee542fc20a1c457c12e6011dc239dda8725.1533125016.git.joabreu@synopsys.com>
Date: Wed, 1 Aug 2018 13:10:35 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: netdev@...r.kernel.org
Cc: Jose Abreu <Jose.Abreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>
Subject: [PATCH net-next 7/9] net: stmmac: Integrate XGMAC into main driver flow
Now that we have all the XGMAC related callbacks, lets start integrating
this IP block into main driver.
Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 55 ++++++++++++++++++-----
1 file changed, 45 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d9e60cfd8a85..2c7a571140bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -51,6 +51,7 @@
#include <linux/reset.h>
#include <linux/of_mdio.h>
#include "dwmac1000.h"
+#include "dwxgmac2.h"
#include "hwif.h"
#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
@@ -262,6 +263,21 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
else
priv->clk_csr = 0;
}
+
+ if (priv->plat->has_xgmac) {
+ if (clk_rate > 400000000)
+ priv->clk_csr = 0x5;
+ else if (clk_rate > 350000000)
+ priv->clk_csr = 0x4;
+ else if (clk_rate > 300000000)
+ priv->clk_csr = 0x3;
+ else if (clk_rate > 250000000)
+ priv->clk_csr = 0x2;
+ else if (clk_rate > 150000000)
+ priv->clk_csr = 0x1;
+ else
+ priv->clk_csr = 0x0;
+ }
}
static void print_pkt(unsigned char *buf, int len)
@@ -498,7 +514,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
if (!priv->hwts_rx_en)
return;
/* For GMAC4, the valid timestamp is from CTX next desc. */
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4 || priv->plat->has_xgmac)
desc = np;
/* Check if timestamp is available */
@@ -540,6 +556,9 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
u32 ts_event_en = 0;
u32 value = 0;
u32 sec_inc;
+ bool xmac;
+
+ xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
netdev_alert(priv->dev, "No support for HW time stamping\n");
@@ -575,7 +594,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
/* PTP v1, UDP, any kind of event packet */
config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
/* take time stamp for all event messages */
- if (priv->plat->has_gmac4)
+ if (xmac)
snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
else
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -610,7 +629,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for all event messages */
- if (priv->plat->has_gmac4)
+ if (xmac)
snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
else
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -647,7 +666,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
ptp_v2 = PTP_TCR_TSVER2ENA;
/* take time stamp for all event messages */
- if (priv->plat->has_gmac4)
+ if (xmac)
snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
else
snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -718,7 +737,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
/* program Sub Second Increment reg */
stmmac_config_sub_second_increment(priv,
priv->ptpaddr, priv->plat->clk_ptp_rate,
- priv->plat->has_gmac4, &sec_inc);
+ xmac, &sec_inc);
temp = div_u64(1000000000ULL, sec_inc);
/* Store sub second increment and flags for later use */
@@ -755,12 +774,14 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
*/
static int stmmac_init_ptp(struct stmmac_priv *priv)
{
+ bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+
if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
return -EOPNOTSUPP;
priv->adv_ts = 0;
- /* Check if adv_ts can be enabled for dwmac 4.x core */
- if (priv->plat->has_gmac4 && priv->dma_cap.atime_stamp)
+ /* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
+ if (xmac && priv->dma_cap.atime_stamp)
priv->adv_ts = 1;
/* Dwmac 3.x core with extend_desc can support adv_ts */
else if (priv->extend_desc && priv->dma_cap.atime_stamp)
@@ -842,6 +863,12 @@ static void stmmac_adjust_link(struct net_device *dev)
new_state = true;
ctrl &= ~priv->hw->link.speed_mask;
switch (phydev->speed) {
+ case SPEED_10000:
+ ctrl |= priv->hw->link.speed10000;
+ break;
+ case SPEED_2500:
+ ctrl |= priv->hw->link.speed2500;
+ break;
case SPEED_1000:
ctrl |= priv->hw->link.speed1000;
break;
@@ -3305,6 +3332,9 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
int coe = priv->hw->rx_csum;
unsigned int next_entry;
unsigned int count = 0;
+ bool xmac;
+
+ xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
if (netif_msg_rx_status(priv)) {
void *rx_head;
@@ -3406,7 +3436,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
* in case of GMAC4 because it needs
* to refill the used descriptors, always.
*/
- if (unlikely(!priv->plat->has_gmac4 &&
+ if (unlikely(!xmac &&
((frame_len < priv->rx_copybreak) ||
stmmac_rx_threshold_count(rx_q)))) {
skb = netdev_alloc_skb_ip_align(priv->dev,
@@ -3642,7 +3672,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
u32 tx_cnt = priv->plat->tx_queues_to_use;
u32 queues_count;
u32 queue;
+ bool xmac;
+ xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
if (priv->irq_wake)
@@ -3661,7 +3693,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
/* To handle GMAC own interrupts */
- if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
+ if ((priv->plat->has_gmac) || xmac) {
int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
int mtl_status;
@@ -4269,6 +4301,8 @@ int stmmac_dvr_probe(struct device *device,
ndev->min_mtu = ETH_ZLEN - ETH_HLEN;
if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00))
ndev->max_mtu = JUMBO_LEN;
+ else if (priv->plat->has_xgmac)
+ ndev->max_mtu = XGMAC_JUMBO_LEN;
else
ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
/* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu
@@ -4290,7 +4324,8 @@ int stmmac_dvr_probe(struct device *device,
* has to be disable and this can be done by passing the
* riwt_off field from the platform.
*/
- if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) {
+ if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
+ (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
priv->use_riwt = 1;
dev_info(priv->device,
"Enable RX Mitigation via HW Watchdog Timer\n");
--
2.7.4
Powered by blists - more mailing lists