netdev - Re: [PATCH v3 7/8] net: phy: Add support to configure clock in Broadcom iProc mdio mux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 1 Aug 2018 14:45:22 -0700
From:   Arun Parameswaran <arun.parameswaran@...adcom.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Russell King - ARM Linux <linux@...linux.org.uk>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>, netdev@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v3 7/8] net: phy: Add support to configure clock in
 Broadcom iProc mdio mux

Hi Andrew, Russell,

On 18-08-01 01:38 PM, Andrew Lunn wrote:
> On Wed, Aug 01, 2018 at 09:23:14PM +0100, Russell King - ARM Linux wrote:
>> On Wed, Aug 01, 2018 at 10:07:12PM +0200, Andrew Lunn wrote:
>>> You might want to consider adding clk_optional_get() and
>>> devm_clk_optional_get().
>>
>> I think there's attempts to add such APIs but I don't think it's
>> trivial - it seems to require a _lot_ of discussion.
>>
>> I think part of that is because of the quirky use of error codes.
>> If you look at clk_get(), it calls __of_clk_get_by_name() which
>> returns:
>>
>>  -ENOENT if DT is disabled
>>  -ENOENT if the device has no DT node
>>  -EPROBE_DEFER if the lookup in DT succeeds but there's no registered
>>    clock
>>  -EINVAL if the device has a DT node but the lookup of the name
>>    failed (in otherwords, the optional clock was omitted)
>>  -ENOENT if the clocks = property has not enough clocks for the
>>     clock-names property
>>  -ENOMEM if we fail to allocate the clk
>>  -ENOENT if __clk_get() fails
> 
> That makes it hard. I added phy_optional_get() early on, when the
> error cases were simple. Hopefully they remain simple...
> 
>       Andrew
> 
I traced the devm_clk_get() and ran into various error codes, so I
figured I should return error on all the other errors (like ENOMEM, EINVAL
& EPROBE_DEFER) but 'ENOENT'.

But, looking at the errors from Russell's email, it looks like I
should look for both 'ENOENT' and 'EINVAL' and consider both these
errors as 'clock not specified' ?

Can I do something like this in the code for this patchset:

md->core_clk = devm_clk_get(&pdev->dev, NULL);
if (md->core_clk == ERR_PTR(-ENOENT) || md->core_clk == ERR_PTR(-EINVAL)) {
	/* clock is optional, without it the default
	 * rate divider register values will be used
	 */
	md->core_clk = NULL;
} else if (IS_ERR(md->core_clk)) {
	return PTR_ERR(md->core_clk);
} else {
	rc = clk_prepare_enable(md->core_clk);
	...
}

Thanks
Arun