lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <7eba8468b6e69fab66b1bf01f7a2b02b6c81b126.1533307909.git.joabreu@synopsys.com>
Date:   Fri,  3 Aug 2018 15:56:07 +0100
From:   Jose Abreu <Jose.Abreu@...opsys.com>
To:     netdev@...r.kernel.org
Cc:     Jose Abreu <Jose.Abreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v2 net-next 5/9] net: stmmac: Add MDIO related functions for XGMAC2

Add the MDIO related funcionalities for the new IP block XGMAC2.

Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Andrew Lunn <andrew@...n.ch>
---
Changes from v1:
	- Remove C45 support (Andrew)
	- Add define for bits (Andrew)
	- Remove uneeded cast (Andrew)
	- Use different callbacks instead of if's (Andrew)
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 101 +++++++++++++++++++++-
 1 file changed, 99 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 5df1a608e566..9bbdb78d3315 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -29,6 +29,7 @@
 #include <linux/phy.h>
 #include <linux/slab.h>
 
+#include "dwxgmac2.h"
 #include "stmmac.h"
 
 #define MII_BUSY 0x00000001
@@ -39,6 +40,96 @@
 #define MII_GMAC4_WRITE			(1 << MII_GMAC4_GOC_SHIFT)
 #define MII_GMAC4_READ			(3 << MII_GMAC4_GOC_SHIFT)
 
+/* XGMAC defines */
+#define MII_XGMAC_SADDR			BIT(18)
+#define MII_XGMAC_CMD_SHIFT		16
+#define MII_XGMAC_WRITE			(1 << MII_XGMAC_CMD_SHIFT)
+#define MII_XGMAC_READ			(3 << MII_XGMAC_CMD_SHIFT)
+#define MII_XGMAC_BUSY			BIT(22)
+
+static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+	struct net_device *ndev = bus->priv;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	unsigned int mii_address = priv->hw->mii.addr;
+	unsigned int mii_data = priv->hw->mii.data;
+	u32 tmp, addr, value = MII_XGMAC_BUSY;
+
+	if (phyreg & MII_ADDR_C45) {
+		return -EOPNOTSUPP;
+	} else {
+		if (phyaddr >= 4)
+			return -ENODEV;
+
+		/* Set port as Clause 22 */
+		tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
+		tmp |= BIT(phyaddr);
+		writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
+
+		addr = (phyaddr << 16) | (phyreg & 0x1f);
+	}
+
+	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+		& priv->hw->mii.clk_csr_mask;
+	value |= MII_XGMAC_SADDR | MII_XGMAC_READ;
+
+	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
+		return -EBUSY;
+
+	writel(addr, priv->ioaddr + mii_address);
+	writel(value, priv->ioaddr + mii_data);
+
+	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
+		return -EBUSY;
+
+	/* Read the data from the MII data register */
+	return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+}
+
+static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
+				    int phyreg, u16 phydata)
+{
+	struct net_device *ndev = bus->priv;
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	unsigned int mii_address = priv->hw->mii.addr;
+	unsigned int mii_data = priv->hw->mii.data;
+	u32 addr, tmp, value = MII_XGMAC_BUSY;
+
+	if (phyreg & MII_ADDR_C45) {
+		return -EOPNOTSUPP;
+	} else {
+		if (phyaddr >= 4)
+			return -ENODEV;
+
+		/* Set port as Clause 22 */
+		tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
+		tmp |= BIT(phyaddr);
+		writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
+
+		addr = (phyaddr << 16) | (phyreg & 0x1f);
+	}
+
+	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
+		& priv->hw->mii.clk_csr_mask;
+	value |= phydata | MII_XGMAC_SADDR;
+	value |= MII_XGMAC_WRITE;
+
+	/* Wait until any existing MII operation is complete */
+	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
+		return -EBUSY;
+
+	/* Set the MII address register to write */
+	writel(addr, priv->ioaddr + mii_address);
+	writel(value, priv->ioaddr + mii_data);
+
+	/* Wait until any existing MII operation is complete */
+	return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+				  !(tmp & MII_XGMAC_BUSY), 100, 10000);
+}
+
 /**
  * stmmac_mdio_read
  * @bus: points to the mii_bus structure
@@ -223,8 +314,14 @@ int stmmac_mdio_register(struct net_device *ndev)
 #endif
 
 	new_bus->name = "stmmac";
-	new_bus->read = &stmmac_mdio_read;
-	new_bus->write = &stmmac_mdio_write;
+
+	if (priv->plat->has_xgmac) {
+		new_bus->read = &stmmac_xgmac2_mdio_read;
+		new_bus->write = &stmmac_xgmac2_mdio_write;
+	} else {
+		new_bus->read = &stmmac_mdio_read;
+		new_bus->write = &stmmac_mdio_write;
+	}
 
 	new_bus->reset = &stmmac_mdio_reset;
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
-- 
2.7.4


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ