[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180806212909.21720-1-f.fainelli@gmail.com>
Date: Mon, 6 Aug 2018 14:29:05 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>, andrew@...n.ch,
vivien.didelot@...oirfairelinux.com, linville@...driver.com,
davem@...emloft.net
Subject: [PATCH net-next 0/3] net: Support Wake-on-LAN using filters
Hi David, John,
This is technically a v2, but this patch series builds on your feedback
and defines the following:
- a new WAKE_* bit: WAKE_FILTER which can be enabled alongside other type
of Wake-on-LAN to support waking up on a programmed filter (match + action)
- a new RX_CLS_FLOW_WAKE flow action which can be specified by an user when
inserting a flow using ethtool::rxnfc, similar to the existing RX_CLS_FLOW_DISC
The bcm_sf2 and bcmsysport drivers are updated accordingly to work in concert to
allow matching packets at the switch level, identified by their filter location
to be used as a match by the SYSTEM PORT (CPU/management controller) during
Wake-on-LAN.
Let me know if this looks better than the previous incarnation of the patch
series.
Attached is also the ethtool patch that I would be submitting once the uapi
changes are committed.
Thank you!
Florian Fainelli (3):
ethtool: Add WAKE_FILTER and RX_CLS_FLOW_WAKE
net: dsa: bcm_sf2: Propagate ethtool::rxnfc to CPU port
net: systemport: Add support for WAKE_FILTER
drivers/net/dsa/bcm_sf2_cfp.c | 40 ++++-
drivers/net/ethernet/broadcom/bcmsysport.c | 193 ++++++++++++++++++++-
drivers/net/ethernet/broadcom/bcmsysport.h | 11 +-
include/uapi/linux/ethtool.h | 5 +-
4 files changed, 236 insertions(+), 13 deletions(-)
--
2.17.1
Powered by blists - more mailing lists