| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1533818018-29005-2-git-send-email-ben.whitten@lairdtech.com>
Date: Thu, 9 Aug 2018 13:33:32 +0100
From: Ben Whitten <ben.whitten@...il.com>
To: afaerber@...e.de
Cc: starnight@...cu.edu.tw, hasnain.virk@....com,
netdev@...r.kernel.org, liuxuenetmail@...il.com, shess@...sware.de,
Ben Whitten <ben.whitten@...rdtech.com>
Subject: [PATCH lora-next v2 2/8] net: lora: sx1301: convert to devm registration of netdev
We allow the devres framework handle the clean removal of resources on
teardown of the device, in this case the SPI device, saving lengthy
unwind code and improving clarity.
Signed-off-by: Ben Whitten <ben.whitten@...rdtech.com>
---
drivers/net/lora/sx1301.c | 87 +++++++++++++++--------------------------------
1 file changed, 27 insertions(+), 60 deletions(-)
diff --git a/drivers/net/lora/sx1301.c b/drivers/net/lora/sx1301.c
index 5342b61..3c09f5a 100644
--- a/drivers/net/lora/sx1301.c
+++ b/drivers/net/lora/sx1301.c
@@ -3,6 +3,7 @@
* Semtech SX1301 LoRa concentrator
*
* Copyright (c) 2018 Andreas Färber
+ * Copyright (c) 2018 Ben Whitten
*
* Based on SX1301 HAL code:
* Copyright (c) 2013 Semtech-Cycleo
@@ -637,20 +638,17 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_read(spi, REG_VERSION, &val);
if (ret) {
dev_err(&spi->dev, "version read failed\n");
- goto err_version;
+ return ret;
}
if (val != 103) {
dev_err(&spi->dev, "unexpected version: %u\n", val);
- ret = -ENXIO;
- goto err_version;
+ return -ENXIO;
}
- netdev = alloc_loradev(sizeof(*priv));
- if (!netdev) {
- ret = -ENOMEM;
- goto err_alloc_loradev;
- }
+ netdev = devm_alloc_loradev(&spi->dev, sizeof(*priv));
+ if (!netdev)
+ return -ENOMEM;
priv = netdev_priv(netdev);
priv->rst_gpio = rst;
@@ -662,19 +660,19 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, REG_PAGE_RESET, 0);
if (ret) {
dev_err(&spi->dev, "page/reset write failed\n");
- goto err_init_page;
+ return ret;
}
ret = sx1301_soft_reset(spi);
if (ret) {
dev_err(&spi->dev, "soft reset failed\n");
- goto err_soft_reset;
+ return ret;
}
ret = sx1301_read(spi, 16, &val);
if (ret) {
dev_err(&spi->dev, "16 read failed\n");
- goto err_read_global_en_0;
+ return ret;
}
val &= ~REG_16_GLOBAL_EN;
@@ -682,13 +680,13 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, 16, val);
if (ret) {
dev_err(&spi->dev, "16 write failed\n");
- goto err_write_global_en_0;
+ return ret;
}
ret = sx1301_read(spi, 17, &val);
if (ret) {
dev_err(&spi->dev, "17 read failed\n");
- goto err_read_clk32m_0;
+ return ret;
}
val &= ~REG_17_CLK32M_EN;
@@ -696,7 +694,7 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, 17, val);
if (ret) {
dev_err(&spi->dev, "17 write failed\n");
- goto err_write_clk32m_0;
+ return ret;
}
ret = sx1301_page_read(spi, 2, 43, &val);
@@ -749,8 +747,7 @@ static int sx1301_probe(struct spi_device *spi)
priv->radio_a_ctrl = spi_alloc_master(&spi->dev, sizeof(*radio));
if (!priv->radio_a_ctrl) {
- ret = -ENOMEM;
- goto err_radio_a_alloc;
+ return -ENOMEM;
}
sx1301_radio_setup(priv->radio_a_ctrl);
@@ -765,15 +762,14 @@ static int sx1301_probe(struct spi_device *spi)
if (ret) {
dev_err(&spi->dev, "radio A SPI register failed\n");
spi_controller_put(priv->radio_a_ctrl);
- goto err_radio_a_register;
+ return ret;
}
/* radio B */
priv->radio_b_ctrl = spi_alloc_master(&spi->dev, sizeof(*radio));
if (!priv->radio_b_ctrl) {
- ret = -ENOMEM;
- goto err_radio_b_alloc;
+ return -ENOMEM;
}
sx1301_radio_setup(priv->radio_b_ctrl);
@@ -788,7 +784,7 @@ static int sx1301_probe(struct spi_device *spi)
if (ret) {
dev_err(&spi->dev, "radio B SPI register failed\n");
spi_controller_put(priv->radio_b_ctrl);
- goto err_radio_b_register;
+ return ret;
}
/* GPIO */
@@ -796,7 +792,7 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_read(spi, REG_GPIO_MODE, &val);
if (ret) {
dev_err(&spi->dev, "GPIO mode read failed\n");
- goto err_read_gpio_mode;
+ return ret;
}
val |= GENMASK(4, 0);
@@ -804,13 +800,13 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, REG_GPIO_MODE, val);
if (ret) {
dev_err(&spi->dev, "GPIO mode write failed\n");
- goto err_write_gpio_mode;
+ return ret;
}
ret = sx1301_read(spi, REG_GPIO_SELECT_OUTPUT, &val);
if (ret) {
dev_err(&spi->dev, "GPIO select output read failed\n");
- goto err_read_gpio_select_output;
+ return ret;
}
val &= ~GENMASK(3, 0);
@@ -819,7 +815,7 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, REG_GPIO_SELECT_OUTPUT, val);
if (ret) {
dev_err(&spi->dev, "GPIO select output write failed\n");
- goto err_write_gpio_select_output;
+ return ret;
}
/* TODO LBT */
@@ -827,7 +823,7 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_read(spi, 16, &val);
if (ret) {
dev_err(&spi->dev, "16 read (1) failed\n");
- goto err_read_global_en_1;
+ return ret;
}
val |= REG_16_GLOBAL_EN;
@@ -835,13 +831,13 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, 16, val);
if (ret) {
dev_err(&spi->dev, "16 write (1) failed\n");
- goto err_write_global_en_1;
+ return ret;
}
ret = sx1301_read(spi, 17, &val);
if (ret) {
dev_err(&spi->dev, "17 read (1) failed\n");
- goto err_read_clk32m_1;
+ return ret;
}
val |= REG_17_CLK32M_EN;
@@ -849,58 +845,28 @@ static int sx1301_probe(struct spi_device *spi)
ret = sx1301_write(spi, 17, val);
if (ret) {
dev_err(&spi->dev, "17 write (1) failed\n");
- goto err_write_clk32m_1;
+ return ret;
}
/* calibration */
ret = sx1301_agc_calibrate(spi);
if (ret)
- goto err_agc_calibrate;
+ return ret;
/* TODO */
ret = sx1301_load_all_firmware(spi);
if (ret)
- goto err_load_firmware;
+ return ret;
dev_info(&spi->dev, "SX1301 module probed\n");
return 0;
-
-err_load_firmware:
-err_agc_calibrate:
-err_write_clk32m_1:
-err_read_clk32m_1:
-err_write_global_en_1:
-err_read_global_en_1:
-err_write_gpio_select_output:
-err_read_gpio_select_output:
-err_write_gpio_mode:
-err_read_gpio_mode:
-err_radio_b_register:
-err_radio_b_alloc:
-err_radio_a_register:
-err_radio_a_alloc:
-err_write_clk32m_0:
-err_read_clk32m_0:
-err_write_global_en_0:
-err_read_global_en_0:
-err_soft_reset:
-err_init_page:
- free_loradev(netdev);
-err_alloc_loradev:
-err_version:
- return ret;
}
static int sx1301_remove(struct spi_device *spi)
{
- struct net_device *netdev = spi_get_drvdata(spi);
-
- //unregister_loradev(netdev);
- free_loradev(netdev);
-
dev_info(&spi->dev, "SX1301 module removed\n");
return 0;
@@ -927,4 +893,5 @@ module_spi_driver(sx1301_spi_driver);
MODULE_DESCRIPTION("SX1301 SPI driver");
MODULE_AUTHOR("Andreas Färber <afaerber@...e.de>");
+MODULE_AUTHOR("Ben Whitten <ben.whitten@...il.com>");
MODULE_LICENSE("GPL");
--
2.7.4
Powered by blists - more mailing lists