[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CY1PR0701MB116366F64F08100E2A28B3E989370@CY1PR0701MB1163.namprd07.prod.outlook.com>
Date: Thu, 23 Aug 2018 21:59:00 +0000
From: "Chopra, Manish" <Manish.Chopra@...ium.com>
To: "Chopra, Manish" <Manish.Chopra@...ium.com>,
"davem@...emloft.net" <davem@...emloft.net>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Dept-GE Linux NIC Dev <Dept-GELinuxNICDev@...ium.com>,
"bpoirier@...e.com" <bpoirier@...e.com>
Subject: RE: [PATCH net 1/1] qlge: Fix netdev features configuration.
> -----Original Message-----
> From: Manish Chopra <manish.chopra@...ium.com>
> Sent: Friday, August 24, 2018 2:02 AM
> To: davem@...emloft.net
> Cc: netdev@...r.kernel.org; Dept-GE Linux NIC Dev <Dept-
> GELinuxNICDev@...ium.com>; bpoirier@...e.com
> Subject: [PATCH net 1/1] qlge: Fix netdev features configuration.
>
> qlge_fix_features() is not supposed to modify hardware or driver state,
> rather it is supposed to only fix requested fetures bits. Currently
> qlge_fix_features() also goes for interface down and up unnecessarily if there
> is not even any change in features set.
>
> This patch changes/fixes following -
>
> 1) Move reload of interface or device re-config from
> qlge_fix_features() to qlge_set_features().
> 2) Reload of interface in qlge_set_features() only if
> relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed.
> 3) Get rid of qlge_fix_features() since driver is not really
> required to fix any features bit.
>
> Signed-off-by: Manish <manish.chopra@...ium.com>
> Reviewed-by: Benjamin Poirier <bpoirier@...e.com>
> ---
> drivers/net/ethernet/qlogic/qlge/qlge_main.c | 23 ++++++++---------------
> 1 file changed, 8 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
> b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
> index 353f1c1..059ba94 100644
> --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
> +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
> @@ -2384,26 +2384,20 @@ static int qlge_update_hw_vlan_features(struct
> net_device *ndev,
> return status;
> }
>
> -static netdev_features_t qlge_fix_features(struct net_device *ndev,
> - netdev_features_t features)
> -{
> - int err;
> -
> - /* Update the behavior of vlan accel in the adapter */
> - err = qlge_update_hw_vlan_features(ndev, features);
> - if (err)
> - return err;
> -
> - return features;
> -}
> -
> static int qlge_set_features(struct net_device *ndev,
> netdev_features_t features)
> {
> netdev_features_t changed = ndev->features ^ features;
> + int err;
> +
> + if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
> + /* Update the behavior of vlan accel in the adapter */
> + err = qlge_update_hw_vlan_features(ndev, features);
> + if (err)
> + return err;
>
> - if (changed & NETIF_F_HW_VLAN_CTAG_RX)
> qlge_vlan_mode(ndev, features);
> + }
>
> return 0;
> }
> @@ -4719,7 +4713,6 @@ static int ql_init_device(struct pci_dev *pdev,
> struct net_device *ndev,
> .ndo_set_mac_address = qlge_set_mac_address,
> .ndo_validate_addr = eth_validate_addr,
> .ndo_tx_timeout = qlge_tx_timeout,
> - .ndo_fix_features = qlge_fix_features,
> .ndo_set_features = qlge_set_features,
> .ndo_vlan_rx_add_vid = qlge_vlan_rx_add_vid,
> .ndo_vlan_rx_kill_vid = qlge_vlan_rx_kill_vid,
> --
> 1.8.3.1
Hello David, Please ignore this patch and consider the previous same patch. By mistake it was submitted twice.
Thanks !!
Powered by blists - more mailing lists