| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180828124435.30578-6-bjorn.topel@gmail.com>
Date: Tue, 28 Aug 2018 14:44:29 +0200
From: Björn Töpel <bjorn.topel@...il.com>
To: bjorn.topel@...il.com, magnus.karlsson@...el.com,
magnus.karlsson@...il.com, alexander.h.duyck@...el.com,
alexander.duyck@...il.com, ast@...nel.org, brouer@...hat.com,
daniel@...earbox.net, netdev@...r.kernel.org,
jesse.brandeburg@...el.com, anjali.singhai@...el.com,
peter.waskiewicz.jr@...el.com
Cc: Björn Töpel <bjorn.topel@...el.com>,
michael.lundkvist@...csson.com, willemdebruijn.kernel@...il.com,
john.fastabend@...il.com, jakub.kicinski@...ronome.com,
neerav.parikh@...el.com, mykyta.iziumtsev@...aro.org,
francois.ozog@...aro.org, ilias.apalodimas@...aro.org,
brian.brooks@...aro.org, u9012063@...il.com, pavel@...tnetmon.com,
qi.z.zhang@...el.com
Subject: [PATCH bpf-next 05/11] i40e: added queue pair disable/enable functions
From: Björn Töpel <bjorn.topel@...el.com>
Add functions for queue pair enable/disable. Instead of resetting the
whole device, only the affected queue pair is disabled or enabled.
This plumbing is used in a later commit, when zero-copy AF_XDP support
is introduced.
Signed-off-by: Björn Töpel <bjorn.topel@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 250 ++++++++++++++++++++
1 file changed, 250 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ac685ad4d877..d8b5a6af72bd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11827,6 +11827,256 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi,
return 0;
}
+/**
+ * i40e_enter_busy_conf - Enters busy config state
+ * @vsi: vsi
+ *
+ * Returns 0 on success, <0 for failure.
+ **/
+static int i40e_enter_busy_conf(struct i40e_vsi *vsi)
+{
+ struct i40e_pf *pf = vsi->back;
+ int timeout = 50;
+
+ while (test_and_set_bit(__I40E_CONFIG_BUSY, pf->state)) {
+ timeout--;
+ if (!timeout)
+ return -EBUSY;
+ usleep_range(1000, 2000);
+ }
+
+ return 0;
+}
+
+/**
+ * i40e_exit_busy_conf - Exits busy config state
+ * @vsi: vsi
+ **/
+static void i40e_exit_busy_conf(struct i40e_vsi *vsi)
+{
+ struct i40e_pf *pf = vsi->back;
+
+ clear_bit(__I40E_CONFIG_BUSY, pf->state);
+}
+
+/**
+ * i40e_queue_pair_reset_stats - Resets all statistics for a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ **/
+static void i40e_queue_pair_reset_stats(struct i40e_vsi *vsi, int queue_pair)
+{
+ memset(&vsi->rx_rings[queue_pair]->rx_stats, 0,
+ sizeof(vsi->rx_rings[queue_pair]->rx_stats));
+ memset(&vsi->tx_rings[queue_pair]->stats, 0,
+ sizeof(vsi->tx_rings[queue_pair]->stats));
+ if (i40e_enabled_xdp_vsi(vsi)) {
+ memset(&vsi->xdp_rings[queue_pair]->stats, 0,
+ sizeof(vsi->xdp_rings[queue_pair]->stats));
+ }
+}
+
+/**
+ * i40e_queue_pair_clean_rings - Cleans all the rings of a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ **/
+static void i40e_queue_pair_clean_rings(struct i40e_vsi *vsi, int queue_pair)
+{
+ i40e_clean_tx_ring(vsi->tx_rings[queue_pair]);
+ if (i40e_enabled_xdp_vsi(vsi))
+ i40e_clean_tx_ring(vsi->xdp_rings[queue_pair]);
+ i40e_clean_rx_ring(vsi->rx_rings[queue_pair]);
+}
+
+/**
+ * i40e_queue_pair_toggle_napi - Enables/disables NAPI for a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ * @enable: true for enable, false for disable
+ **/
+static void i40e_queue_pair_toggle_napi(struct i40e_vsi *vsi, int queue_pair,
+ bool enable)
+{
+ struct i40e_ring *rxr = vsi->rx_rings[queue_pair];
+ struct i40e_q_vector *q_vector = rxr->q_vector;
+
+ if (!vsi->netdev)
+ return;
+
+ /* All rings in a qp belong to the same qvector. */
+ if (q_vector->rx.ring || q_vector->tx.ring) {
+ if (enable)
+ napi_enable(&q_vector->napi);
+ else
+ napi_disable(&q_vector->napi);
+ }
+}
+
+/**
+ * i40e_queue_pair_toggle_rings - Enables/disables all rings for a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ * @enable: true for enable, false for disable
+ *
+ * Returns 0 on success, <0 on failure.
+ **/
+static int i40e_queue_pair_toggle_rings(struct i40e_vsi *vsi, int queue_pair,
+ bool enable)
+{
+ struct i40e_pf *pf = vsi->back;
+ int pf_q, ret = 0;
+
+ pf_q = vsi->base_queue + queue_pair;
+ ret = i40e_control_wait_tx_q(vsi->seid, pf, pf_q,
+ false /*is xdp*/, enable);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "VSI seid %d Tx ring %d %sable timeout\n",
+ vsi->seid, pf_q, (enable ? "en" : "dis"));
+ return ret;
+ }
+
+ i40e_control_rx_q(pf, pf_q, enable);
+ ret = i40e_pf_rxq_wait(pf, pf_q, enable);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "VSI seid %d Rx ring %d %sable timeout\n",
+ vsi->seid, pf_q, (enable ? "en" : "dis"));
+ return ret;
+ }
+
+ /* Due to HW errata, on Rx disable only, the register can
+ * indicate done before it really is. Needs 50ms to be sure
+ */
+ if (!enable)
+ mdelay(50);
+
+ if (!i40e_enabled_xdp_vsi(vsi))
+ return ret;
+
+ ret = i40e_control_wait_tx_q(vsi->seid, pf,
+ pf_q + vsi->alloc_queue_pairs,
+ true /*is xdp*/, enable);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "VSI seid %d XDP Tx ring %d %sable timeout\n",
+ vsi->seid, pf_q, (enable ? "en" : "dis"));
+ }
+
+ return ret;
+}
+
+/**
+ * i40e_queue_pair_enable_irq - Enables interrupts for a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue_pair
+ **/
+static void i40e_queue_pair_enable_irq(struct i40e_vsi *vsi, int queue_pair)
+{
+ struct i40e_ring *rxr = vsi->rx_rings[queue_pair];
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+
+ /* All rings in a qp belong to the same qvector. */
+ if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+ i40e_irq_dynamic_enable(vsi, rxr->q_vector->v_idx);
+ else
+ i40e_irq_dynamic_enable_icr0(pf);
+
+ i40e_flush(hw);
+}
+
+/**
+ * i40e_queue_pair_disable_irq - Disables interrupts for a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue_pair
+ **/
+static void i40e_queue_pair_disable_irq(struct i40e_vsi *vsi, int queue_pair)
+{
+ struct i40e_ring *rxr = vsi->rx_rings[queue_pair];
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_hw *hw = &pf->hw;
+
+ /* For simplicity, instead of removing the qp interrupt causes
+ * from the interrupt linked list, we simply disable the interrupt, and
+ * leave the list intact.
+ *
+ * All rings in a qp belong to the same qvector.
+ */
+ if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
+ u32 intpf = vsi->base_vector + rxr->q_vector->v_idx;
+
+ wr32(hw, I40E_PFINT_DYN_CTLN(intpf - 1), 0);
+ i40e_flush(hw);
+ synchronize_irq(pf->msix_entries[intpf].vector);
+ } else {
+ /* Legacy and MSI mode - this stops all interrupt handling */
+ wr32(hw, I40E_PFINT_ICR0_ENA, 0);
+ wr32(hw, I40E_PFINT_DYN_CTL0, 0);
+ i40e_flush(hw);
+ synchronize_irq(pf->pdev->irq);
+ }
+}
+
+/**
+ * i40e_queue_pair_disable - Disables a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ *
+ * Returns 0 on success, <0 on failure.
+ **/
+int i40e_queue_pair_disable(struct i40e_vsi *vsi, int queue_pair)
+{
+ int err;
+
+ err = i40e_enter_busy_conf(vsi);
+ if (err)
+ return err;
+
+ i40e_queue_pair_disable_irq(vsi, queue_pair);
+ err = i40e_queue_pair_toggle_rings(vsi, queue_pair, false /* off */);
+ i40e_queue_pair_toggle_napi(vsi, queue_pair, false /* off */);
+ i40e_queue_pair_clean_rings(vsi, queue_pair);
+ i40e_queue_pair_reset_stats(vsi, queue_pair);
+
+ return err;
+}
+
+/**
+ * i40e_queue_pair_enable - Enables a queue pair
+ * @vsi: vsi
+ * @queue_pair: queue pair
+ *
+ * Returns 0 on success, <0 on failure.
+ **/
+int i40e_queue_pair_enable(struct i40e_vsi *vsi, int queue_pair)
+{
+ int err;
+
+ err = i40e_configure_tx_ring(vsi->tx_rings[queue_pair]);
+ if (err)
+ return err;
+
+ if (i40e_enabled_xdp_vsi(vsi)) {
+ err = i40e_configure_tx_ring(vsi->xdp_rings[queue_pair]);
+ if (err)
+ return err;
+ }
+
+ err = i40e_configure_rx_ring(vsi->rx_rings[queue_pair]);
+ if (err)
+ return err;
+
+ err = i40e_queue_pair_toggle_rings(vsi, queue_pair, true /* on */);
+ i40e_queue_pair_toggle_napi(vsi, queue_pair, true /* on */);
+ i40e_queue_pair_enable_irq(vsi, queue_pair);
+
+ i40e_exit_busy_conf(vsi);
+
+ return err;
+}
+
/**
* i40e_xdp - implements ndo_bpf for i40e
* @dev: netdevice
--
2.17.1
Powered by blists - more mailing lists