lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9a91148c-ed8e-a7ce-d37d-61b3fd6d455c@synopsys.com>
Date:   Wed, 29 Aug 2018 14:56:47 +0100
From:   Jose Abreu <Jose.Abreu@...opsys.com>
To:     Jerome Brunet <jbrunet@...libre.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        "Jose Abreu" <Jose.Abreu@...opsys.com>, <netdev@...r.kernel.org>
CC:     <linux-kernel@...r.kernel.org>,
        <linux-amlogic@...ts.infradead.org>,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        Vitor Soares <Vitor.Soares@...opsys.com>,
        Corentin Labbe <clabbe@...libre.com>,
        "Martin Blumenstingl" <martin.blumenstingl@...glemail.com>
Subject: Re: [PATCH] Revert "net: stmmac: Do not keep rearming the coalesce
 timer in stmmac_xmit"

++ Martin

Hi Martin,

I just saw you have the same problem as Jerome. Can you please
share the information I mention bellow?

Thanks and Best Regards,
Jose Miguel Abreu

On 28-08-2018 09:12, Jose Abreu wrote:
> Hi Jerome,
>
> On 24-08-2018 10:04, Jerome Brunet wrote:
>> This reverts commit 4ae0169fd1b3c792b66be58995b7e6b629919ecf.
>>
>> This change in the handling of the coalesce timer is causing regression on
>> (at least) amlogic platforms.
>>
>> Network will break down very quickly (a few seconds) after starting
>> a download. This can easily be reproduced using iperf3 for example.
>>
>> The problem has been reported on the S805, S905, S912 and A113 SoCs
>> (Realtek and Micrel PHYs) and it is likely impacting all Amlogics
>> platforms using Gbit ethernet
>>
>> No problem was seen with the platform using 10/100 only PHYs (GXL internal)
>>
>> Reverting change brings things back to normal and allows to use network
>> again until we better understand the problem with the coalesce timer.
>>
>>
> Apologies for the delayed answer but I was in FTO.
>
> I'm not sure what can be causing this but I have some questions
> for you:
>     - What do you mean by "network will break down"? Do you see
> queue timeout?
>     - What do you see in ethtool/ifconfig stats? Can you send me
> the stats before and after network break?
>     - Is your setup multi-queue/channel?
>     - Can you point me to the DT bindings of your setup?
>
> Thanks and Best Regards,
> Jose Miguel Abreu

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ