lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180829150024.43210-1-tony@atomide.com> Date: Wed, 29 Aug 2018 08:00:23 -0700 From: Tony Lindgren <tony@...mide.com> To: David Miller <davem@...emloft.net> Cc: netdev@...r.kernel.org, linux-omap@...r.kernel.org, devicetree@...r.kernel.org, Andrew Lunn <andrew@...n.ch>, Grygorii Strashko <grygorii.strashko@...com>, Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>, Mark Rutland <mark.rutland@....com>, Murali Karicheri <m-karicheri2@...com>, Rob Herring <robh+dt@...nel.org> Subject: [PATCH 1/2] dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandle The current cpsw usage for cpsw-phy-sel is undocumented but is used for all the boards using cpsw. And cpsw-phy-sel is not really a child of the cpsw device, it lives in the system control module instead. Let's document the existing usage, and improve it a bit where we prefer to use a phandle instead of a child device for it. That way we can properly describe the hardware in dts files for things like genpd. Cc: devicetree@...r.kernel.org Cc: Andrew Lunn <andrew@...n.ch> Cc: Grygorii Strashko <grygorii.strashko@...com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org> Cc: Mark Rutland <mark.rutland@....com> Cc: Murali Karicheri <m-karicheri2@...com> Cc: Rob Herring <robh+dt@...nel.org> Signed-off-by: Tony Lindgren <tony@...mide.com> --- Documentation/devicetree/bindings/net/cpsw.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -19,6 +19,10 @@ Required properties: - slaves : Specifies number for slaves - active_slave : Specifies the slave to use for time stamping, ethtool and SIOCGMIIPHY +- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection + device. See also cpsw-phy-sel.txt for it's binding. + Note that in legacy cases cpsw-phy-sel may be + a child device instead of a phandle. Optional properties: - ti,hwmods : Must be "cpgmac0" @@ -75,6 +79,7 @@ Examples: cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; syscon = <&cm>; + cpsw-phy-sel = <&phy_sel>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rgmii-txid"; @@ -103,6 +108,7 @@ Examples: cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; syscon = <&cm>; + cpsw-phy-sel = <&phy_sel>; cpsw_emac0: slave@0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rgmii-txid"; -- 2.18.0
Powered by blists - more mailing lists