lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180830004046.9417-4-mdf@kernel.org>
Date:   Wed, 29 Aug 2018 17:40:46 -0700
From:   Moritz Fischer <mdf@...nel.org>
To:     davem@...emloft.net
Cc:     keescook@...omium.org, f.fainelli@...il.com,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        alex.williams@...com, Moritz Fischer <mdf@...nel.org>
Subject: [PATCH net-next 3/3] net: nixge: Use sysdev instead of ndev->dev.parent for DMA

Use sysdev instead of ndev->dev.parent for DMA in order to
enable usecases where an IOMMU might get in the way otherwise.
In the PCIe wrapper case on x86 the IOMMU group is not inherited
by the platform device that is created as a subdevice of the
PCI wrapper driver.

Signed-off-by: Moritz Fischer <mdf@...nel.org>
---

Hi,

not this patch is still in the early stages,
and as the rest of this series goes on top of [1].

The actual parent device might still change since
the parent device driver is still under development.

If there are clever suggestions on how to generalize
the assignment of sysdev, I'm all ears.

Thanks for your time,

Moritz


[1] https://lkml.org/lkml/2018/8/28/1011

---
 drivers/net/ethernet/ni/nixge.c | 50 +++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index fd8e5b02c459..25fb1642d558 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -16,6 +16,7 @@
 #include <linux/of_irq.h>
 #include <linux/skbuff.h>
 #include <linux/phy.h>
+#include <linux/pci.h>
 #include <linux/mii.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/ethtool.h>
@@ -165,6 +166,7 @@ struct nixge_priv {
 	struct net_device *ndev;
 	struct napi_struct napi;
 	struct device *dev;
+	struct device *sysdev;
 
 	/* Connection to PHY device */
 	struct device_node *phy_node;
@@ -250,7 +252,7 @@ static void nixge_hw_dma_bd_release(struct net_device *ndev)
 		phys_addr = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i],
 						     phys);
 
-		dma_unmap_single(ndev->dev.parent, phys_addr,
+		dma_unmap_single(priv->sysdev, phys_addr,
 				 NIXGE_MAX_JUMBO_FRAME_SIZE,
 				 DMA_FROM_DEVICE);
 
@@ -261,16 +263,16 @@ static void nixge_hw_dma_bd_release(struct net_device *ndev)
 	}
 
 	if (priv->rx_bd_v)
-		dma_free_coherent(ndev->dev.parent,
+		dma_free_coherent(priv->sysdev,
 				  sizeof(*priv->rx_bd_v) * RX_BD_NUM,
 				  priv->rx_bd_v,
 				  priv->rx_bd_p);
 
 	if (priv->tx_skb)
-		devm_kfree(ndev->dev.parent, priv->tx_skb);
+		devm_kfree(priv->sysdev, priv->tx_skb);
 
 	if (priv->tx_bd_v)
-		dma_free_coherent(ndev->dev.parent,
+		dma_free_coherent(priv->sysdev,
 				  sizeof(*priv->tx_bd_v) * TX_BD_NUM,
 				  priv->tx_bd_v,
 				  priv->tx_bd_p);
@@ -290,19 +292,19 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev)
 	priv->rx_bd_ci = 0;
 
 	/* Allocate the Tx and Rx buffer descriptors. */
-	priv->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
+	priv->tx_bd_v = dma_zalloc_coherent(priv->sysdev,
 					    sizeof(*priv->tx_bd_v) * TX_BD_NUM,
 					    &priv->tx_bd_p, GFP_KERNEL);
 	if (!priv->tx_bd_v)
 		goto out;
 
-	priv->tx_skb = devm_kcalloc(ndev->dev.parent,
+	priv->tx_skb = devm_kcalloc(priv->sysdev,
 				    TX_BD_NUM, sizeof(*priv->tx_skb),
 				    GFP_KERNEL);
 	if (!priv->tx_skb)
 		goto out;
 
-	priv->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
+	priv->rx_bd_v = dma_zalloc_coherent(priv->sysdev,
 					    sizeof(*priv->rx_bd_v) * RX_BD_NUM,
 					    &priv->rx_bd_p, GFP_KERNEL);
 	if (!priv->rx_bd_v)
@@ -327,7 +329,7 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev)
 			goto out;
 
 		nixge_hw_dma_bd_set_offset(&priv->rx_bd_v[i], skb);
-		phys = dma_map_single(ndev->dev.parent, skb->data,
+		phys = dma_map_single(priv->sysdev, skb->data,
 				      NIXGE_MAX_JUMBO_FRAME_SIZE,
 				      DMA_FROM_DEVICE);
 
@@ -438,10 +440,10 @@ static void nixge_tx_skb_unmap(struct nixge_priv *priv,
 {
 	if (tx_skb->mapping) {
 		if (tx_skb->mapped_as_page)
-			dma_unmap_page(priv->ndev->dev.parent, tx_skb->mapping,
+			dma_unmap_page(priv->sysdev, tx_skb->mapping,
 				       tx_skb->size, DMA_TO_DEVICE);
 		else
-			dma_unmap_single(priv->ndev->dev.parent,
+			dma_unmap_single(priv->sysdev,
 					 tx_skb->mapping,
 					 tx_skb->size, DMA_TO_DEVICE);
 		tx_skb->mapping = 0;
@@ -519,9 +521,9 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		return NETDEV_TX_OK;
 	}
 
-	cur_phys = dma_map_single(ndev->dev.parent, skb->data,
+	cur_phys = dma_map_single(priv->sysdev, skb->data,
 				  skb_headlen(skb), DMA_TO_DEVICE);
-	if (dma_mapping_error(ndev->dev.parent, cur_phys))
+	if (dma_mapping_error(priv->sysdev, cur_phys))
 		goto drop;
 	nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
 
@@ -539,10 +541,10 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		tx_skb = &priv->tx_skb[priv->tx_bd_tail];
 		frag = &skb_shinfo(skb)->frags[ii];
 
-		cur_phys = skb_frag_dma_map(ndev->dev.parent, frag, 0,
+		cur_phys = skb_frag_dma_map(priv->sysdev, frag, 0,
 					    skb_frag_size(frag),
 					    DMA_TO_DEVICE);
-		if (dma_mapping_error(ndev->dev.parent, cur_phys))
+		if (dma_mapping_error(priv->sysdev, cur_phys))
 			goto frag_err;
 		nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
 
@@ -579,7 +581,7 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 		cur_p = &priv->tx_bd_v[priv->tx_bd_tail];
 		cur_p->status = 0;
 	}
-	dma_unmap_single(priv->ndev->dev.parent,
+	dma_unmap_single(priv->sysdev,
 			 tx_skb->mapping,
 			 tx_skb->size, DMA_TO_DEVICE);
 drop:
@@ -611,7 +613,7 @@ static int nixge_recv(struct net_device *ndev, int budget)
 		if (length > NIXGE_MAX_JUMBO_FRAME_SIZE)
 			length = NIXGE_MAX_JUMBO_FRAME_SIZE;
 
-		dma_unmap_single(ndev->dev.parent,
+		dma_unmap_single(priv->sysdev,
 				 nixge_hw_dma_bd_get_addr(cur_p, phys),
 				 NIXGE_MAX_JUMBO_FRAME_SIZE,
 				 DMA_FROM_DEVICE);
@@ -636,10 +638,10 @@ static int nixge_recv(struct net_device *ndev, int budget)
 		if (!new_skb)
 			return packets;
 
-		cur_phys = dma_map_single(ndev->dev.parent, new_skb->data,
+		cur_phys = dma_map_single(priv->sysdev, new_skb->data,
 					  NIXGE_MAX_JUMBO_FRAME_SIZE,
 					  DMA_FROM_DEVICE);
-		if (dma_mapping_error(ndev->dev.parent, cur_phys)) {
+		if (dma_mapping_error(priv->sysdev, cur_phys)) {
 			/* FIXME: bail out and clean up */
 			netdev_err(ndev, "Failed to map ...\n");
 		}
@@ -1303,6 +1305,7 @@ static int nixge_probe(struct platform_device *pdev)
 	struct net_device *ndev;
 	struct resource *dmares;
 	struct device_node *np;
+	struct device *sysdev;
 	const u8 *mac_addr;
 	int err;
 
@@ -1331,9 +1334,20 @@ static int nixge_probe(struct platform_device *pdev)
 		eth_hw_addr_random(ndev);
 	}
 
+	sysdev = &pdev->dev;
+#ifdef CONFIG_PCI
+	/* if this is a subdevice of a PCI device we'll have to
+	 * make sure we'll use parent instead of our own platform
+	 * device to make sure  the DMA API if we use an IOMMU
+	 */
+	if (sysdev->parent && sysdev->parent->bus == &pci_bus_type)
+		sysdev = sysdev->parent;
+#endif
+
 	priv = netdev_priv(ndev);
 	priv->ndev = ndev;
 	priv->dev = &pdev->dev;
+	priv->sysdev = sysdev;
 
 	netif_napi_add(ndev, &priv->napi, nixge_poll, NAPI_POLL_WEIGHT);
 
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ