netdev - [PATCH v2 net-next 4/7] dt-bindings: net: Add lantiq,xrx200-net DT bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180901120407.9912-1-hauke@hauke-m.de>
Date:   Sat,  1 Sep 2018 14:04:07 +0200
From:   Hauke Mehrtens <hauke@...ke-m.de>
To:     davem@...emloft.net
Cc:     netdev@...r.kernel.org, andrew@...n.ch,
        vivien.didelot@...oirfairelinux.com, f.fainelli@...il.com,
        john@...ozen.org, linux-mips@...ux-mips.org, dev@...sin.me,
        hauke.mehrtens@...el.com, devicetree@...r.kernel.org
Subject: [PATCH v2 net-next 4/7] dt-bindings: net: Add lantiq,xrx200-net DT bindings

This adds the binding for the PMAC core between the CPU and the GSWIP
switch found on the xrx200 / VR9 Lantiq / Intel SoC.

Signed-off-by: Hauke Mehrtens <hauke@...ke-m.de>
Cc: devicetree@...r.kernel.org
---
 .../devicetree/bindings/net/lantiq,xrx200-net.txt   | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt

diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
new file mode 100644
index 000000000000..8a2fe5200cdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
@@ -0,0 +1,21 @@
+Lantiq xRX200 GSWIP PMAC Ethernet driver
+==================================
+
+Required properties:
+
+- compatible	: "lantiq,xrx200-net" for the PMAC of the embedded
+		: GSWIP in the xXR200
+- reg		: memory range of the PMAC core inside of the GSWIP core
+- interrupts	: TX and RX DMA interrupts. Use interrupt-names "tx" for
+		: the TX interrupt and "rx" for the RX interrupt.
+
+Example:
+
+eth0: eth@...B308 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "lantiq,xrx200-net";
+	reg = <0xE10B308 0x30>;
+	interrupts = <73>, <72>;
+	interrupt-names = "tx", "rx";
+};
-- 
2.11.0