netdev - [PATCH net-next 2/2] net: stmmac: Fixup the tail addr setting in xmit path

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <998608ebe30fa360a24f97773f7780eb918ee08b.1535981331.git.joabreu@synopsys.com>
Date:   Mon,  3 Sep 2018 14:35:19 +0100
From:   Jose Abreu <Jose.Abreu@...opsys.com>
To:     netdev@...r.kernel.org
Cc:     Jose Abreu <Jose.Abreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Joao Pinto <Joao.Pinto@...opsys.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>
Subject: [PATCH net-next 2/2] net: stmmac: Fixup the tail addr setting in xmit path

Currently we are always setting the tail address of descriptor list to
the end of the pre-allocated list.

According to databook this is not correct. Tail address should point to
the last available descriptor + 1, which means we have to update the
tail address everytime we call the xmit function.

This should make no impact in older versions of MAC but in newer
versions there are some DMA features which allows the IP to fetch
descriptors in advance and in a non sequential order so its critical
that we set the tail address correctly.

Signed-off-by: Jose Abreu <joabreu@...opsys.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: Joao Pinto <jpinto@...opsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1fca66ad6b17..14f890f2a970 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2224,8 +2224,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 				    tx_q->dma_tx_phy, chan);
 
-		tx_q->tx_tail_addr = tx_q->dma_tx_phy +
-			    (DMA_TX_SIZE * sizeof(struct dma_desc));
+		tx_q->tx_tail_addr = tx_q->dma_tx_phy;
 		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
 				       tx_q->tx_tail_addr, chan);
 	}
@@ -3015,6 +3014,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
 
+	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc));
 	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
 
 	if (priv->tx_coal_timer && !tx_q->tx_timer_active) {
@@ -3235,6 +3235,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	stmmac_enable_dma_transmission(priv, priv->ioaddr);
 
+	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc));
 	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
 
 	if (priv->tx_coal_timer && !tx_q->tx_timer_active) {
-- 
2.7.4