| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180905001535.19168-1-mdf@kernel.org>
Date: Tue, 4 Sep 2018 17:15:35 -0700
From: Moritz Fischer <mdf@...nel.org>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, f.fainelli@...il.com, andrew@...n.ch,
alex.williams@...com, moritz.fischer@...us.com,
linux-kernel@...r.kernel.org, Moritz Fischer <mdf@...nel.org>
Subject: [RFC/PATCH] net: nixge: Add PHYLINK support
Add basic PHYLINK support to driver.
Suggested-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Moritz Fischer <mdf@...nel.org>
---
Hi all,
as Andrew suggested in order to enable SFP as
well as fixed-link support add PHYLINK support.
A couple of questions are still open (hence the RFC):
1) It seems odd to implement PHYLINK callbacks that
are all empty? If so, should we have generic empty
ones in drivers/net/phy/phylink.c like we have for
genphys?
2) If this is ok, then I'll go ahead rework this with
a DT binding update to deprecate the non-'mdio'-subnode
case (since there are no in-tree users we might just
change the binding)?
3) I'm again not sure about the 'select PHYLINK', wouldn't
wanna break the build again...
Thanks again for your time!
Moritz
---
drivers/net/ethernet/ni/Kconfig | 1 +
drivers/net/ethernet/ni/nixge.c | 115 +++++++++++++++++++++++---------
2 files changed, 83 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/ni/Kconfig b/drivers/net/ethernet/ni/Kconfig
index c73978474c4b..80cd72948551 100644
--- a/drivers/net/ethernet/ni/Kconfig
+++ b/drivers/net/ethernet/ni/Kconfig
@@ -21,6 +21,7 @@ config NI_XGE_MANAGEMENT_ENET
depends on HAS_IOMEM && HAS_DMA
select PHYLIB
select OF_MDIO if OF
+ select PHYLINK
help
Simple LAN device for debug or management purposes. Can
support either 10G or 1G PHYs via SFP+ ports.
diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index 74cf52e3fb09..a0e790d07b1c 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -11,6 +11,7 @@
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
+#include <linux/phylink.h>
#include <linux/of_irq.h>
#include <linux/skbuff.h>
#include <linux/phy.h>
@@ -165,7 +166,7 @@ struct nixge_priv {
struct device *dev;
/* Connection to PHY device */
- struct device_node *phy_node;
+ struct phylink *phylink;
phy_interface_t phy_mode;
int link;
@@ -416,20 +417,6 @@ static void nixge_device_reset(struct net_device *ndev)
netif_trans_update(ndev);
}
-static void nixge_handle_link_change(struct net_device *ndev)
-{
- struct nixge_priv *priv = netdev_priv(ndev);
- struct phy_device *phydev = ndev->phydev;
-
- if (phydev->link != priv->link || phydev->speed != priv->speed ||
- phydev->duplex != priv->duplex) {
- priv->link = phydev->link;
- priv->speed = phydev->speed;
- priv->duplex = phydev->duplex;
- phy_print_status(phydev);
- }
-}
-
static void nixge_tx_skb_unmap(struct nixge_priv *priv,
struct nixge_tx_skb *tx_skb)
{
@@ -859,17 +846,15 @@ static void nixge_dma_err_handler(unsigned long data)
static int nixge_open(struct net_device *ndev)
{
struct nixge_priv *priv = netdev_priv(ndev);
- struct phy_device *phy;
int ret;
nixge_device_reset(ndev);
- phy = of_phy_connect(ndev, priv->phy_node,
- &nixge_handle_link_change, 0, priv->phy_mode);
- if (!phy)
- return -ENODEV;
+ ret = phylink_of_phy_connect(priv->phylink, priv->dev->of_node, 0);
+ if (ret < 0)
+ return ret;
- phy_start(phy);
+ phylink_start(priv->phylink);
/* Enable tasklets for Axi DMA error handling */
tasklet_init(&priv->dma_err_tasklet, nixge_dma_err_handler,
@@ -893,8 +878,7 @@ static int nixge_open(struct net_device *ndev)
err_rx_irq:
free_irq(priv->tx_irq, ndev);
err_tx_irq:
- phy_stop(phy);
- phy_disconnect(phy);
+ phylink_disconnect_phy(priv->phylink);
tasklet_kill(&priv->dma_err_tasklet);
netdev_err(ndev, "request_irq() failed\n");
return ret;
@@ -908,9 +892,9 @@ static int nixge_stop(struct net_device *ndev)
netif_stop_queue(ndev);
napi_disable(&priv->napi);
- if (ndev->phydev) {
- phy_stop(ndev->phydev);
- phy_disconnect(ndev->phydev);
+ if (priv->phylink) {
+ phylink_stop(priv->phylink);
+ phylink_disconnect_phy(priv->phylink);
}
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
@@ -1076,13 +1060,31 @@ static int nixge_ethtools_set_phys_id(struct net_device *ndev,
return 0;
}
+static int
+nixge_ethtool_set_link_ksettings(struct net_device *ndev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct nixge_priv *priv = netdev_priv(ndev);
+
+ return phylink_ethtool_ksettings_set(priv->phylink, cmd);
+}
+
+static int
+nixge_ethtool_get_link_ksettings(struct net_device *ndev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct nixge_priv *priv = netdev_priv(ndev);
+
+ return phylink_ethtool_ksettings_get(priv->phylink, cmd);
+}
+
static const struct ethtool_ops nixge_ethtool_ops = {
.get_drvinfo = nixge_ethtools_get_drvinfo,
.get_coalesce = nixge_ethtools_get_coalesce,
.set_coalesce = nixge_ethtools_set_coalesce,
.set_phys_id = nixge_ethtools_set_phys_id,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
+ .get_link_ksettings = nixge_ethtool_get_link_ksettings,
+ .set_link_ksettings = nixge_ethtool_set_link_ksettings,
.get_link = ethtool_op_get_link,
};
@@ -1225,11 +1227,52 @@ static void *nixge_get_nvmem_address(struct device *dev)
return mac;
}
+static void nixge_validate(struct net_device *ndev, unsigned long *supported,
+ struct phylink_link_state *state)
+{
+}
+
+static int nixge_mac_link_state(struct net_device *ndev,
+ struct phylink_link_state *state)
+{
+ return 0;
+}
+
+static void nixge_mac_config(struct net_device *ndev, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+
+static void nixge_mac_an_restart(struct net_device *ndev)
+{
+}
+
+static void nixge_mac_link_down(struct net_device *ndev, unsigned int mode,
+ phy_interface_t interface)
+{
+}
+
+static void nixge_mac_link_up(struct net_device *ndev, unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phy)
+{
+}
+
+static const struct phylink_mac_ops nixge_phylink_ops = {
+ .validate = nixge_validate,
+ .mac_link_state = nixge_mac_link_state,
+ .mac_an_restart = nixge_mac_an_restart,
+ .mac_config = nixge_mac_config,
+ .mac_link_down = nixge_mac_link_down,
+ .mac_link_up = nixge_mac_link_up,
+};
+
static int nixge_probe(struct platform_device *pdev)
{
struct nixge_priv *priv;
struct net_device *ndev;
struct resource *dmares;
+ struct device_node *mn;
const u8 *mac_addr;
int err;
@@ -1286,7 +1329,13 @@ static int nixge_probe(struct platform_device *pdev)
priv->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
priv->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
- err = nixge_mdio_setup(priv, pdev->dev.of_node);
+ mn = of_get_child_by_name(pdev->dev.of_node, "mdio");
+ if (!mn) {
+ dev_warn(&pdev->dev, "No \"mdio\" subnode found, defaulting to legacy\n");
+ mn = pdev->dev.of_node;
+ }
+
+ err = nixge_mdio_setup(priv, mn);
if (err) {
netdev_err(ndev, "error registering mdio bus");
goto free_netdev;
@@ -1299,10 +1348,10 @@ static int nixge_probe(struct platform_device *pdev)
goto unregister_mdio;
}
- priv->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
- if (!priv->phy_node) {
- netdev_err(ndev, "not find \"phy-handle\" property\n");
- err = -EINVAL;
+ priv->phylink = phylink_create(ndev, pdev->dev.fwnode, priv->phy_mode,
+ &nixge_phylink_ops);
+ if (IS_ERR(priv->phylink)) {
+ err = PTR_ERR(priv->phylink);
goto unregister_mdio;
}
--
2.18.0
Powered by blists - more mailing lists