[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1536616350-15442-7-git-send-email-andrew@lunn.ch>
Date: Mon, 10 Sep 2018 23:52:24 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v2 net-next 06/12] net: ethernet: Fix up drivers masking pause support
PHY drivers don't indicate they support pause. They expect MAC drivers
to enable its support if the MAC has the needed hardware. Thus MAC
drivers should not mask Pause support, but enable it.
Change a few ANDs to ORs.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/ethernet/broadcom/tg3.c | 4 ++--
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 ++--
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/smsc/smsc911x.c | 2 +-
drivers/net/ethernet/smsc/smsc9420.c | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index cdc32724c9d9..eab00239a47a 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -2123,14 +2123,14 @@ static int tg3_phy_init(struct tg3 *tp)
case PHY_INTERFACE_MODE_RGMII:
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
phy_set_max_speed(phydev, SPEED_1000);
- phydev->supported &= (SUPPORTED_Pause |
+ phydev->supported |= (SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
}
/* fallthru */
case PHY_INTERFACE_MODE_MII:
phy_set_max_speed(phydev, SPEED_100);
- phydev->supported &= (SUPPORTED_Pause |
+ phydev->supported |= (SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
default:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 398971a062f4..05b15d254e32 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -10,8 +10,6 @@
#define HCLGE_PHY_SUPPORTED_FEATURES (SUPPORTED_Autoneg | \
SUPPORTED_TP | \
- SUPPORTED_Pause | \
- SUPPORTED_Asym_Pause | \
PHY_10BT_FEATURES | \
PHY_100BT_FEATURES | \
PHY_1000BT_FEATURES)
@@ -213,6 +211,8 @@ int hclge_mac_connect_phy(struct hclge_dev *hdev)
}
phydev->supported &= HCLGE_PHY_SUPPORTED_FEATURES;
+ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+
phydev->advertising = phydev->supported;
return 0;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index e93b5375504b..db231bda7c2a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -360,7 +360,7 @@ static int mtk_phy_connect(struct net_device *dev)
SUPPORTED_Pause | SUPPORTED_Asym_Pause;
phy_set_max_speed(dev->phydev, SPEED_1000);
- dev->phydev->supported &= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ dev->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
dev->phydev->advertising = dev->phydev->supported |
ADVERTISED_Autoneg;
phy_start_aneg(dev->phydev);
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index f84dbd0beb8e..3e34bf53f055 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1051,7 +1051,7 @@ static int smsc911x_mii_probe(struct net_device *dev)
phy_set_max_speed(phydev, SPEED_100);
/* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
phydev->advertising = phydev->supported;
pdata->last_duplex = -1;
diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
index 795f60d92611..326177384544 100644
--- a/drivers/net/ethernet/smsc/smsc9420.c
+++ b/drivers/net/ethernet/smsc/smsc9420.c
@@ -1138,7 +1138,7 @@ static int smsc9420_mii_probe(struct net_device *dev)
phy_set_max_speed(phydev, SPEED_100);
/* mask with MAC supported features */
- phydev->supported &= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ phydev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
phydev->advertising = phydev->supported;
phy_attached_info(phydev);
--
2.19.0.rc1
Powered by blists - more mailing lists