netdev - [PATCH v3 net-next 01/12] net: phy: ste10Xp: Remove wrong SUPPORTED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1536709999-13420-2-git-send-email-andrew@lunn.ch>
Date:   Wed, 12 Sep 2018 01:53:08 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     David Miller <davem@...emloft.net>
Cc:     netdev <netdev@...r.kernel.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v3 net-next 01/12] net: phy: ste10Xp: Remove wrong SUPPORTED_Pause

The PHY driver should not indicate that Pause is supported. It is upto
the MAC drive enable it, if it supports Pause frames. So remove it
from the ste10Xp driver.

Signed-off-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
v2: The datasheet indicates the PHY can negotiated pause, confirming
this is wrong.
---
 drivers/net/phy/ste10Xp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index fbd548a1ad84..2fe9a87b55b5 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -86,7 +86,7 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE101P_PHY_ID,
 	.phy_id_mask = 0xfffffff0,
 	.name = "STe101p",
-	.features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+	.features = PHY_BASIC_FEATURES,
 	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
@@ -97,7 +97,7 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE100P_PHY_ID,
 	.phy_id_mask = 0xffffffff,
 	.name = "STe100p",
-	.features = PHY_BASIC_FEATURES | SUPPORTED_Pause,
+	.features = PHY_BASIC_FEATURES,
 	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
-- 
2.19.0.rc1