[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1ca2f3ebdd82d78b7ccbd86acd7ce9245316b42a.1536994993.git.igor.russkikh@aquantia.com>
Date: Sat, 15 Sep 2018 17:20:05 +0300
From: Igor Russkikh <igor.russkikh@...antia.com>
To: netdev@...r.kernel.org
Cc: Igor Russkikh <igor.russkikh@...antia.com>,
Michael Rauch <michael@...ch.be>
Subject: [PATCH net] net: aquantia: memory corruption on jumbo frames
From: Michael Rauch <michael@...ch.be>
This patch fixes skb_shared area, which will be corrupted
upon reception of 4K jumbo packets.
Originally build_skb usage purpose was to reuse page for skb to eliminate
needs of extra fragments. But that logic does not take into account that
skb_shared_info should be reserved at the end of skb data area.
In case packet data consumes all the page (4K), skb_shinfo location
overflows the page. As a consequence, __build_skb zeroed shinfo data above
the allocated page, corrupting next page.
The issue is rarely seen in real life because jumbo are normally larger
than 4K and that causes another code path to trigger.
But it 100% reproducible with simple scapy packet, like:
sendp(IP(dst="192.168.100.3") / TCP(dport=443) \
/ Raw(RandString(size=(4096-40))), iface="enp1s0")
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Michael Rauch <michael@...ch.be>
Tested-by: Michael Rauch <michael@...ch.be>
Signed-off-by: Michael Rauch <michael@...ch.be>
Tested-by: Nikita Danilov <nikita.danilov@...antia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@...antia.com>
---
drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 32 +++++++++++++-----------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index b5f1f62e8e25..d1e1a0ba8615 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -225,9 +225,10 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
}
/* for single fragment packets use build_skb() */
- if (buff->is_eop) {
+ if (buff->is_eop &&
+ buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
skb = build_skb(page_address(buff->page),
- buff->len + AQ_SKB_ALIGN);
+ AQ_CFG_RX_FRAME_MAX);
if (unlikely(!skb)) {
err = -ENOMEM;
goto err_exit;
@@ -247,18 +248,21 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
buff->len - ETH_HLEN,
SKB_TRUESIZE(buff->len - ETH_HLEN));
- for (i = 1U, next_ = buff->next,
- buff_ = &self->buff_ring[next_]; true;
- next_ = buff_->next,
- buff_ = &self->buff_ring[next_], ++i) {
- skb_add_rx_frag(skb, i, buff_->page, 0,
- buff_->len,
- SKB_TRUESIZE(buff->len -
- ETH_HLEN));
- buff_->is_cleaned = 1;
-
- if (buff_->is_eop)
- break;
+ if (!buff->is_eop) {
+ for (i = 1U, next_ = buff->next,
+ buff_ = &self->buff_ring[next_];
+ true; next_ = buff_->next,
+ buff_ = &self->buff_ring[next_], ++i) {
+ skb_add_rx_frag(skb, i,
+ buff_->page, 0,
+ buff_->len,
+ SKB_TRUESIZE(buff->len -
+ ETH_HLEN));
+ buff_->is_cleaned = 1;
+
+ if (buff_->is_eop)
+ break;
+ }
}
}
--
2.7.4
Powered by blists - more mailing lists