[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180927053003.GA27637@Red>
Date: Thu, 27 Sep 2018 07:30:03 +0200
From: LABBE Corentin <clabbe@...libre.com>
To: Christophe LEROY <christophe.leroy@....fr>
Cc: Gilles.Muller@...6.fr, Julia.Lawall@...6.fr, agust@...x.de,
airlied@...ux.ie, alexandre.torgue@...com, alistair@...ple.id.au,
benh@...nel.crashing.org, carlo@...one.org, davem@...emloft.net,
galak@...nel.crashing.org, joabreu@...opsys.com,
khilman@...libre.com, maxime.ripard@...tlin.com,
michal.lkml@...kovi.net, mpe@...erman.id.au,
mporter@...nel.crashing.org, narmstrong@...libre.com,
nicolas.palix@...g.fr, oss@...error.net, paulus@...ba.org,
peppe.cavallaro@...com, tj@...nel.org, vitb@...nel.crashing.org,
wens@...e.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-ide@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linuxppc-dev@...ts.ozlabs.org, cocci@...teme.lip6.fr,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/7] powerpc: rename setbits32/clrbits32 to
setbits32_be/clrbits32_be
On Tue, Sep 25, 2018 at 06:56:23AM +0200, Christophe LEROY wrote:
> Fix the patch title.
>
>
> Le 24/09/2018 à 21:04, Corentin Labbe a écrit :
> > Since setbits32/clrbits32 work on be32, it's better to remove ambiguity on
> > the used data type.
> >
> > Signed-off-by: Corentin Labbe <clabbe@...libre.com>
> > ---
> > arch/powerpc/include/asm/fsl_lbc.h | 2 +-
> > arch/powerpc/include/asm/io.h | 5 +-
> > arch/powerpc/platforms/44x/canyonlands.c | 4 +-
> > arch/powerpc/platforms/4xx/gpio.c | 28 ++++-----
> > arch/powerpc/platforms/512x/pdm360ng.c | 6 +-
> > arch/powerpc/platforms/52xx/mpc52xx_common.c | 6 +-
> > arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 10 ++--
> > arch/powerpc/platforms/82xx/ep8248e.c | 2 +-
> > arch/powerpc/platforms/82xx/km82xx.c | 6 +-
> > arch/powerpc/platforms/82xx/mpc8272_ads.c | 10 ++--
> > arch/powerpc/platforms/82xx/pq2.c | 2 +-
> > arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 4 +-
> > arch/powerpc/platforms/82xx/pq2fads.c | 10 ++--
> > arch/powerpc/platforms/83xx/km83xx.c | 6 +-
> > arch/powerpc/platforms/83xx/mpc836x_mds.c | 2 +-
> > arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +-
> > arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 4 +-
> > arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 2 +-
> > arch/powerpc/platforms/85xx/p1022_ds.c | 4 +-
> > arch/powerpc/platforms/85xx/p1022_rdk.c | 4 +-
> > arch/powerpc/platforms/85xx/t1042rdb_diu.c | 4 +-
> > arch/powerpc/platforms/85xx/twr_p102x.c | 2 +-
> > arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 4 +-
> > arch/powerpc/platforms/8xx/adder875.c | 2 +-
> > arch/powerpc/platforms/8xx/m8xx_setup.c | 4 +-
> > arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 +-
> > arch/powerpc/platforms/8xx/mpc885ads_setup.c | 28 ++++-----
> > arch/powerpc/platforms/embedded6xx/flipper-pic.c | 6 +-
> > arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 8 +--
> > arch/powerpc/platforms/embedded6xx/wii.c | 10 ++--
> > arch/powerpc/sysdev/cpm1.c | 26 ++++-----
> > arch/powerpc/sysdev/cpm2.c | 16 ++---
> > arch/powerpc/sysdev/cpm_common.c | 4 +-
> > arch/powerpc/sysdev/fsl_85xx_l2ctlr.c | 8 +--
> > arch/powerpc/sysdev/fsl_lbc.c | 2 +-
> > arch/powerpc/sysdev/fsl_pci.c | 8 +--
> > arch/powerpc/sysdev/fsl_pmc.c | 2 +-
> > arch/powerpc/sysdev/fsl_rcpm.c | 74 ++++++++++++------------
> > arch/powerpc/sysdev/fsl_rio.c | 4 +-
> > arch/powerpc/sysdev/fsl_rmu.c | 8 +--
> > arch/powerpc/sysdev/mpic_timer.c | 12 ++--
> > 41 files changed, 178 insertions(+), 177 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
> > index c7240a024b96..4d6a56b48a28 100644
> > --- a/arch/powerpc/include/asm/fsl_lbc.h
> > +++ b/arch/powerpc/include/asm/fsl_lbc.h
> > @@ -276,7 +276,7 @@ static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
> > */
> > static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
> > {
> > - clrbits32(upm->mxmr, MxMR_OP_RP);
> > + clrbits_be32(upm->mxmr, MxMR_OP_RP);
> >
> > while (in_be32(upm->mxmr) & MxMR_OP_RP)
> > cpu_relax();
> > diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
> > index e0331e754568..57486a1b9992 100644
> > --- a/arch/powerpc/include/asm/io.h
> > +++ b/arch/powerpc/include/asm/io.h
> > @@ -873,8 +873,8 @@ static inline void * bus_to_virt(unsigned long address)
> > #endif /* CONFIG_PPC32 */
> >
> > /* access ports */
> > -#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
> > -#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
> > +#define setbits_be32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
> > +#define clrbits_be32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
> >
> > #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
> > #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
> > @@ -904,6 +904,7 @@ static inline void * bus_to_virt(unsigned long address)
> > #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
> >
> > #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
> > +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
>
> This one already exists a few lines above.
>
> >
> > #endif /* __KERNEL__ */
> >
> > diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
> > index 157f4ce46386..6aeb4ca64d09 100644
> > --- a/arch/powerpc/platforms/44x/canyonlands.c
> > +++ b/arch/powerpc/platforms/44x/canyonlands.c
> > @@ -113,8 +113,8 @@ static int __init ppc460ex_canyonlands_fixup(void)
> > * USB2HStop and gpio19 will be USB2DStop. For more details refer to
> > * table 34-7 of PPC460EX user manual.
> > */
> > - setbits32((vaddr + GPIO0_OSRH), 0x42000000);
> > - setbits32((vaddr + GPIO0_TSRH), 0x42000000);
> > + setbits_be32((vaddr + GPIO0_OSRH), 0x42000000);
> > + setbits_be32((vaddr + GPIO0_TSRH), 0x42000000);
> > err_gpio:
> > iounmap(vaddr);
> > err_bcsr:
> > diff --git a/arch/powerpc/platforms/4xx/gpio.c b/arch/powerpc/platforms/4xx/gpio.c
> > index 2238e369cde4..8436da0617fd 100644
> > --- a/arch/powerpc/platforms/4xx/gpio.c
> > +++ b/arch/powerpc/platforms/4xx/gpio.c
> > @@ -82,9 +82,9 @@ __ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
> > struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
> >
> > if (val)
> > - setbits32(®s->or, GPIO_MASK(gpio));
> > + setbits_be32(®s->or, GPIO_MASK(gpio));
> > else
> > - clrbits32(®s->or, GPIO_MASK(gpio));
> > + clrbits_be32(®s->or, GPIO_MASK(gpio));
> > }
> >
> > static void
> > @@ -112,18 +112,18 @@ static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
> > spin_lock_irqsave(&chip->lock, flags);
> >
> > /* Disable open-drain function */
> > - clrbits32(®s->odr, GPIO_MASK(gpio));
> > + clrbits_be32(®s->odr, GPIO_MASK(gpio));
> >
> > /* Float the pin */
> > - clrbits32(®s->tcr, GPIO_MASK(gpio));
> > + clrbits_be32(®s->tcr, GPIO_MASK(gpio));
> >
> > /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
> > if (gpio < 16) {
> > - clrbits32(®s->osrl, GPIO_MASK2(gpio));
> > - clrbits32(®s->tsrl, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->osrl, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->tsrl, GPIO_MASK2(gpio));
> > } else {
> > - clrbits32(®s->osrh, GPIO_MASK2(gpio));
> > - clrbits32(®s->tsrh, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->osrh, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->tsrh, GPIO_MASK2(gpio));
> > }
> >
> > spin_unlock_irqrestore(&chip->lock, flags);
> > @@ -145,18 +145,18 @@ ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
> > __ppc4xx_gpio_set(gc, gpio, val);
> >
> > /* Disable open-drain function */
> > - clrbits32(®s->odr, GPIO_MASK(gpio));
> > + clrbits_be32(®s->odr, GPIO_MASK(gpio));
> >
> > /* Drive the pin */
> > - setbits32(®s->tcr, GPIO_MASK(gpio));
> > + setbits_be32(®s->tcr, GPIO_MASK(gpio));
> >
> > /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
> > if (gpio < 16) {
> > - clrbits32(®s->osrl, GPIO_MASK2(gpio));
> > - clrbits32(®s->tsrl, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->osrl, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->tsrl, GPIO_MASK2(gpio));
> > } else {
> > - clrbits32(®s->osrh, GPIO_MASK2(gpio));
> > - clrbits32(®s->tsrh, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->osrh, GPIO_MASK2(gpio));
> > + clrbits_be32(®s->tsrh, GPIO_MASK2(gpio));
> > }
> >
> > spin_unlock_irqrestore(&chip->lock, flags);
> > diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c
> > index dc81f05e0bce..06b95795267a 100644
> > --- a/arch/powerpc/platforms/512x/pdm360ng.c
> > +++ b/arch/powerpc/platforms/512x/pdm360ng.c
> > @@ -38,7 +38,7 @@ static int pdm360ng_get_pendown_state(void)
> >
> > reg = in_be32(pdm360ng_gpio_base + 0xc);
> > if (reg & 0x40)
> > - setbits32(pdm360ng_gpio_base + 0xc, 0x40);
> > + setbits_be32(pdm360ng_gpio_base + 0xc, 0x40);
> >
> > reg = in_be32(pdm360ng_gpio_base + 0x8);
> >
> > @@ -69,8 +69,8 @@ static int __init pdm360ng_penirq_init(void)
> > return -ENODEV;
> > }
> > out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff);
> > - setbits32(pdm360ng_gpio_base + 0x18, 0x2000);
> > - setbits32(pdm360ng_gpio_base + 0x10, 0x40);
> > + setbits_be32(pdm360ng_gpio_base + 0x18, 0x2000);
> > + setbits_be32(pdm360ng_gpio_base + 0x10, 0x40);
> >
> > return 0;
> > }
> > diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
> > index 565e3a83dc9e..edfe619d67bf 100644
> > --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
> > +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
> > @@ -314,13 +314,13 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)
> >
> > /* enable gpio pins for output */
> > setbits8(&wkup_gpio->wkup_gpioe, reset);
> > - setbits32(&simple_gpio->simple_gpioe, sync | out);
> > + setbits_be32(&simple_gpio->simple_gpioe, sync | out);
> >
> > setbits8(&wkup_gpio->wkup_ddr, reset);
> > - setbits32(&simple_gpio->simple_ddr, sync | out);
> > + setbits_be32(&simple_gpio->simple_ddr, sync | out);
> >
> > /* Assert cold reset */
> > - clrbits32(&simple_gpio->simple_dvo, sync | out);
> > + clrbits_be32(&simple_gpio->simple_dvo, sync | out);
> > clrbits8(&wkup_gpio->wkup_dvo, reset);
> >
> > /* wait for 1 us */
> > diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> > index 17cf249b18ee..e9f4dec06077 100644
> > --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> > +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
> > @@ -142,7 +142,7 @@ static void mpc52xx_gpt_irq_unmask(struct irq_data *d)
> > unsigned long flags;
> >
> > raw_spin_lock_irqsave(&gpt->lock, flags);
> > - setbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
> > + setbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
> > raw_spin_unlock_irqrestore(&gpt->lock, flags);
> > }
> >
> > @@ -152,7 +152,7 @@ static void mpc52xx_gpt_irq_mask(struct irq_data *d)
> > unsigned long flags;
> >
> > raw_spin_lock_irqsave(&gpt->lock, flags);
> > - clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
> > + clrbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
> > raw_spin_unlock_irqrestore(&gpt->lock, flags);
> > }
> >
> > @@ -308,7 +308,7 @@ static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
> > dev_dbg(gpt->dev, "%s: gpio:%d\n", __func__, gpio);
> >
> > raw_spin_lock_irqsave(&gpt->lock, flags);
> > - clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK);
> > + clrbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK);
> > raw_spin_unlock_irqrestore(&gpt->lock, flags);
> >
> > return 0;
> > @@ -482,7 +482,7 @@ int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt)
> > return -EBUSY;
> > }
> >
> > - clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
> > + clrbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
> > raw_spin_unlock_irqrestore(&gpt->lock, flags);
> > return 0;
> > }
> > @@ -639,7 +639,7 @@ static int mpc52xx_wdt_release(struct inode *inode, struct file *file)
> > unsigned long flags;
> >
> > raw_spin_lock_irqsave(&gpt_wdt->lock, flags);
> > - clrbits32(&gpt_wdt->regs->mode,
> > + clrbits_be32(&gpt_wdt->regs->mode,
> > MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN);
>
> The alignment needs to be fixed here (and all other places). The second
> line should start under the &
> Eventually use checkpatch to locate all places that need to be fixed.
> (checkpatch may even fix it for you)
>
Thanks, I will fix all reported problem
Powered by blists - more mailing lists