netdev - [PATCH v3 net-next 8/9] devlink: Add Documentation/networking/devlink-params.txt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1538116103-12356-9-git-send-email-vasundhara-v.volam@broadcom.com>
Date:   Fri, 28 Sep 2018 11:58:22 +0530
From:   Vasundhara Volam <vasundhara-v.volam@...adcom.com>
To:     davem@...emloft.net
Cc:     michael.chan@...adcom.com, netdev@...r.kernel.org,
        jiri@...lanox.com, jakub.kicinski@...ronome.com
Subject: [PATCH v3 net-next 8/9] devlink: Add Documentation/networking/devlink-params.txt

This patch adds a new file to add information about some of the
generic configuration parameters set via devlink.

Cc: "David S. Miller" <davem@...emloft.net>
Cc: Jonathan Corbet <corbet@....net>
Cc: linux-doc@...r.kernel.org
Cc: Jiri Pirko <jiri@...lanox.com>
Cc: Michael Chan <michael.chan@...adcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@...adcom.com>
---
 Documentation/networking/devlink-params.txt | 42 +++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/networking/devlink-params.txt

diff --git a/Documentation/networking/devlink-params.txt b/Documentation/networking/devlink-params.txt
new file mode 100644
index 0000000..ae444ff
--- /dev/null
+++ b/Documentation/networking/devlink-params.txt
@@ -0,0 +1,42 @@
+Devlink configuration parameters
+================================
+Following is the list of configuration parameters via devlink interface.
+Each parameter can be generic or driver specific and are device level
+parameters.
+
+Note that the driver-specific files should contain the generic params
+they support to, with supported config modes.
+
+Each parameter can be set in different configuration modes:
+	runtime		- set while driver is running, no reset required.
+	driverinit	- applied while driver initializes, requires restart
+			driver by devlink reload command.
+	permanent	- written to device's non-volatile memory, hard reset
+			required.
+
+Following is the list of parameters:
+====================================
+enable_sriov		[DEVICE, GENERIC]
+			Enable Single Root I/O Virtualisation (SRIOV) in
+			the device.
+			Type: Boolean
+
+ignore_ari		[DEVICE, GENERIC]
+			Ignore Alternative Routing-ID Interpretation (ARI)
+			capability. If enabled, adapter will ignore ARI
+			capability even when platforms has the support
+			enabled and creates same number of partitions when
+			platform does not support ARI.
+			Type: Boolean
+
+msix_vec_per_pf_max	[DEVICE, GENERIC]
+			Provides the maximum number of MSIX interrupts that
+			a device can create. Value is same across all
+			physical functions (PFs) in the device.
+			Type: u32
+
+msix_vec_per_pf_min	[DEVICE, GENERIC]
+			Provides the minimum number of MSIX interrupts required
+			for the device initialization. Value is same across all
+			physical functions (PFs) in the device.
+			Type: u32
-- 
1.8.3.1