| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 1 Oct 2018 11:56:50 -0700
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Gavi Teitz <gavi@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 02/13] net/mlx5e: Change VF representors' RQ type
From: Gavi Teitz <gavi@...lanox.com>
The representors' RQ size was not large enough for them to achieve
high enough performance, and therefore needed to be enlarged, while
suffering a minimum hit to its memory usage. To achieve this the
representors RQ size was increased, and its type was changed to be a
striding RQ if it is supported.
Towards that goal the following changes were made:
* Extracted the sequence for setting the standard netdev's RQ parmas
into a function
* Replaced the sequence for setting the representor's RQ params with
the standard sequence
The impact of this change can be seen in the following measurements
taken on a setup of a VM over a VF, connected to OVS via the VF
representor, to an external host:
Before current change:
TCP Throughput [Gb/s]
VM to external host ~ 7.2
With the current change (measured with a striding RQ):
TCP Throughput [Gb/s]
VM to external host ~ 23.5
Each representor now consumes 2 [MB] of memory for its packet
buffers.
Signed-off-by: Gavi Teitz <gavi@...lanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 ++
.../net/ethernet/mellanox/mlx5/core/en_main.c | 30 +++++++++++--------
.../net/ethernet/mellanox/mlx5/core/en_rep.c | 11 ++++---
3 files changed, 25 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 01a967e717e7..b298456da8e7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -966,6 +966,8 @@ void mlx5e_destroy_netdev(struct mlx5e_priv *priv);
void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params,
u16 max_channels, u16 mtu);
+void mlx5e_build_rq_params(struct mlx5_core_dev *mdev,
+ struct mlx5e_params *params);
u8 mlx5e_params_calculate_tx_min_inline(struct mlx5_core_dev *mdev);
void mlx5e_rx_dim_work(struct work_struct *work);
void mlx5e_tx_dim_work(struct work_struct *work);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 5955b4d844cc..46001855d0e9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4480,6 +4480,23 @@ static u32 mlx5e_choose_lro_timeout(struct mlx5_core_dev *mdev, u32 wanted_timeo
return MLX5_CAP_ETH(mdev, lro_timer_supported_periods[i]);
}
+void mlx5e_build_rq_params(struct mlx5_core_dev *mdev,
+ struct mlx5e_params *params)
+{
+ /* Prefer Striding RQ, unless any of the following holds:
+ * - Striding RQ configuration is not possible/supported.
+ * - Slow PCI heuristic.
+ * - Legacy RQ would use linear SKB while Striding RQ would use non-linear.
+ */
+ if (!slow_pci_heuristic(mdev) &&
+ mlx5e_striding_rq_possible(mdev, params) &&
+ (mlx5e_rx_mpwqe_is_linear_skb(mdev, params) ||
+ !mlx5e_rx_is_linear_skb(mdev, params)))
+ MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_STRIDING_RQ, true);
+ mlx5e_set_rq_type(mdev, params);
+ mlx5e_init_rq_type_params(mdev, params);
+}
+
void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params,
u16 max_channels, u16 mtu)
@@ -4505,18 +4522,7 @@ void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS, params->rx_cqe_compress_def);
/* RQ */
- /* Prefer Striding RQ, unless any of the following holds:
- * - Striding RQ configuration is not possible/supported.
- * - Slow PCI heuristic.
- * - Legacy RQ would use linear SKB while Striding RQ would use non-linear.
- */
- if (!slow_pci_heuristic(mdev) &&
- mlx5e_striding_rq_possible(mdev, params) &&
- (mlx5e_rx_mpwqe_is_linear_skb(mdev, params) ||
- !mlx5e_rx_is_linear_skb(mdev, params)))
- MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_STRIDING_RQ, true);
- mlx5e_set_rq_type(mdev, params);
- mlx5e_init_rq_type_params(mdev, params);
+ mlx5e_build_rq_params(mdev, params);
/* HW LRO */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index f6eead24931f..fc4433e93846 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -46,8 +46,6 @@
#define MLX5E_REP_PARAMS_LOG_SQ_SIZE \
max(0x6, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)
-#define MLX5E_REP_PARAMS_LOG_RQ_SIZE \
- max(0x6, MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)
static const char mlx5e_rep_driver_name[] = "mlx5e_rep";
@@ -934,14 +932,15 @@ static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev,
params->hard_mtu = MLX5E_ETH_HARD_MTU;
params->sw_mtu = mtu;
params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE;
- params->rq_wq_type = MLX5_WQ_TYPE_CYCLIC;
- params->log_rq_mtu_frames = MLX5E_REP_PARAMS_LOG_RQ_SIZE;
+ /* RQ */
+ mlx5e_build_rq_params(mdev, params);
+
+ /* CQ moderation params */
params->rx_dim_enabled = MLX5_CAP_GEN(mdev, cq_moderation);
mlx5e_set_rx_cq_mode_params(params, cq_period_mode);
params->num_tc = 1;
- params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
mlx5_query_min_inline(mdev, ¶ms->tx_min_inline_mode);
}
@@ -1077,7 +1076,7 @@ static const struct mlx5e_profile mlx5e_rep_profile = {
.max_nch = mlx5e_get_rep_max_num_channels,
.update_carrier = NULL,
.rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep,
- .rx_handlers.handle_rx_cqe_mpwqe = NULL /* Not supported */,
+ .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq,
.max_tc = 1,
};
--
2.17.1
Powered by blists - more mailing lists