| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181003154825.5440-14-jeffrey.t.kirsher@intel.com>
Date: Wed, 3 Oct 2018 08:48:23 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Brett Creeley <brett.creeley@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com,
Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 13/15] ice: Add more flexibility on how we assign an ITR index
From: Brett Creeley <brett.creeley@...el.com>
This issue came about when looking at the VF function
ice_vc_cfg_irq_map_msg. Currently we are assigning the itr_setting value
to the itr_idx received from the AVF driver, which is not correct and is
not used for the VF flow anyway. Currently the only way we set the ITR
index for both the PF and VF driver is by hard coding ICE_TX_ITR or
ICE_RX_ITR for the ITR index on each q_vector.
To fix this, add the member itr_idx in struct ice_ring_container. This
can then be used to dynamically program the correct ITR index. This change
also affected the PF driver so make the necessary changes there as well.
Also, removed the itr_setting member in struct ice_ring because it is not
being used meaningfully and is going to be removed in a future patch that
includes dynamic ITR.
On another note, this will be useful moving forward if we decide to split
Rx/Tx rings on different q_vectors instead of sharing them as queue pairs.
Signed-off-by: Brett Creeley <brett.creeley@...el.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/ice/ice_lib.c | 73 +++++++++++--------
drivers/net/ethernet/intel/ice/ice_txrx.h | 13 +---
.../net/ethernet/intel/ice/ice_virtchnl_pf.c | 20 +++--
3 files changed, 59 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 8139302cd92b..49f1940772ed 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1204,7 +1204,6 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi)
ring->vsi = vsi;
ring->dev = &pf->pdev->dev;
ring->count = vsi->num_desc;
- ring->itr_setting = ICE_DFLT_TX_ITR;
vsi->tx_rings[i] = ring;
}
@@ -1224,7 +1223,6 @@ static int ice_vsi_alloc_rings(struct ice_vsi *vsi)
ring->netdev = vsi->netdev;
ring->dev = &pf->pdev->dev;
ring->count = vsi->num_desc;
- ring->itr_setting = ICE_DFLT_RX_ITR;
vsi->rx_rings[i] = ring;
}
@@ -1261,6 +1259,7 @@ static void ice_vsi_map_rings_to_vectors(struct ice_vsi *vsi)
tx_rings_per_v = DIV_ROUND_UP(tx_rings_rem, q_vectors - v_id);
q_vector->num_ring_tx = tx_rings_per_v;
q_vector->tx.ring = NULL;
+ q_vector->tx.itr_idx = ICE_TX_ITR;
q_base = vsi->num_txq - tx_rings_rem;
for (q_id = q_base; q_id < (q_base + tx_rings_per_v); q_id++) {
@@ -1276,6 +1275,7 @@ static void ice_vsi_map_rings_to_vectors(struct ice_vsi *vsi)
rx_rings_per_v = DIV_ROUND_UP(rx_rings_rem, q_vectors - v_id);
q_vector->num_ring_rx = rx_rings_per_v;
q_vector->rx.ring = NULL;
+ q_vector->rx.itr_idx = ICE_RX_ITR;
q_base = vsi->num_rxq - rx_rings_rem;
for (q_id = q_base; q_id < (q_base + rx_rings_per_v); q_id++) {
@@ -1683,6 +1683,37 @@ static u32 ice_intrl_usec_to_reg(u8 intrl, u8 gran)
return 0;
}
+/**
+ * ice_cfg_itr - configure the initial interrupt throttle values
+ * @hw: pointer to the HW structure
+ * @q_vector: interrupt vector that's being configured
+ * @vector: HW vector index to apply the interrupt throttling to
+ *
+ * Configure interrupt throttling values for the ring containers that are
+ * associated with the interrupt vector passed in.
+ */
+static void
+ice_cfg_itr(struct ice_hw *hw, struct ice_q_vector *q_vector, u16 vector)
+{
+ u8 itr_gran = hw->itr_gran;
+
+ if (q_vector->num_ring_rx) {
+ struct ice_ring_container *rc = &q_vector->rx;
+
+ rc->itr = ITR_TO_REG(ICE_DFLT_RX_ITR, itr_gran);
+ rc->latency_range = ICE_LOW_LATENCY;
+ wr32(hw, GLINT_ITR(rc->itr_idx, vector), rc->itr);
+ }
+
+ if (q_vector->num_ring_tx) {
+ struct ice_ring_container *rc = &q_vector->tx;
+
+ rc->itr = ITR_TO_REG(ICE_DFLT_TX_ITR, itr_gran);
+ rc->latency_range = ICE_LOW_LATENCY;
+ wr32(hw, GLINT_ITR(rc->itr_idx, vector), rc->itr);
+ }
+}
+
/**
* ice_vsi_cfg_msix - MSIX mode Interrupt Config in the HW
* @vsi: the VSI being configured
@@ -1693,31 +1724,13 @@ void ice_vsi_cfg_msix(struct ice_vsi *vsi)
u16 vector = vsi->hw_base_vector;
struct ice_hw *hw = &pf->hw;
u32 txq = 0, rxq = 0;
- int i, q, itr;
- u8 itr_gran;
+ int i, q;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
struct ice_q_vector *q_vector = vsi->q_vectors[i];
- itr_gran = hw->itr_gran;
+ ice_cfg_itr(hw, q_vector, vector);
- q_vector->intrl = ICE_DFLT_INTRL;
-
- if (q_vector->num_ring_rx) {
- q_vector->rx.itr =
- ITR_TO_REG(vsi->rx_rings[rxq]->itr_setting,
- itr_gran);
- q_vector->rx.latency_range = ICE_LOW_LATENCY;
- }
-
- if (q_vector->num_ring_tx) {
- q_vector->tx.itr =
- ITR_TO_REG(vsi->tx_rings[txq]->itr_setting,
- itr_gran);
- q_vector->tx.latency_range = ICE_LOW_LATENCY;
- }
- wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), q_vector->rx.itr);
- wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), q_vector->tx.itr);
wr32(hw, GLINT_RATE(vector),
ice_intrl_usec_to_reg(q_vector->intrl, hw->intrl_gran));
@@ -1733,32 +1746,32 @@ void ice_vsi_cfg_msix(struct ice_vsi *vsi)
* tracked for this PF.
*/
for (q = 0; q < q_vector->num_ring_tx; q++) {
+ int itr_idx = q_vector->tx.itr_idx;
u32 val;
- itr = ICE_ITR_NONE;
if (vsi->type == ICE_VSI_VF)
val = QINT_TQCTL_CAUSE_ENA_M |
- (itr << QINT_TQCTL_ITR_INDX_S) |
+ (itr_idx << QINT_TQCTL_ITR_INDX_S) |
((i + 1) << QINT_TQCTL_MSIX_INDX_S);
else
val = QINT_TQCTL_CAUSE_ENA_M |
- (itr << QINT_TQCTL_ITR_INDX_S) |
+ (itr_idx << QINT_TQCTL_ITR_INDX_S) |
(vector << QINT_TQCTL_MSIX_INDX_S);
wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), val);
txq++;
}
for (q = 0; q < q_vector->num_ring_rx; q++) {
+ int itr_idx = q_vector->rx.itr_idx;
u32 val;
- itr = ICE_ITR_NONE;
if (vsi->type == ICE_VSI_VF)
val = QINT_RQCTL_CAUSE_ENA_M |
- (itr << QINT_RQCTL_ITR_INDX_S) |
+ (itr_idx << QINT_RQCTL_ITR_INDX_S) |
((i + 1) << QINT_RQCTL_MSIX_INDX_S);
else
val = QINT_RQCTL_CAUSE_ENA_M |
- (itr << QINT_RQCTL_ITR_INDX_S) |
+ (itr_idx << QINT_RQCTL_ITR_INDX_S) |
(vector << QINT_RQCTL_MSIX_INDX_S);
wr32(hw, QINT_RQCTL(vsi->rxq_map[rxq]), val);
rxq++;
@@ -2157,8 +2170,8 @@ static void ice_vsi_release_msix(struct ice_vsi *vsi)
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
struct ice_q_vector *q_vector = vsi->q_vectors[i];
- wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), 0);
- wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), 0);
+ wr32(hw, GLINT_ITR(ICE_IDX_ITR0, vector), 0);
+ wr32(hw, GLINT_ITR(ICE_IDX_ITR1, vector), 0);
for (q = 0; q < q_vector->num_ring_tx; q++) {
wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), 0);
txq++;
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index a9b92974e041..1d0f58bd389b 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -105,8 +105,9 @@ enum ice_rx_dtype {
#define ICE_TX_ITR ICE_IDX_ITR1
#define ICE_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
#define ICE_ITR_8K 125
-#define ICE_DFLT_TX_ITR ICE_ITR_8K
-#define ICE_DFLT_RX_ITR ICE_ITR_8K
+#define ICE_ITR_20K 50
+#define ICE_DFLT_TX_ITR ICE_ITR_20K
+#define ICE_DFLT_RX_ITR ICE_ITR_20K
/* apply ITR granularity translation to program the register. itr_gran is either
* 2 or 4 usecs so we need to divide by 2 first then shift by that value
*/
@@ -135,13 +136,6 @@ struct ice_ring {
u16 q_index; /* Queue number of ring */
u32 txq_teid; /* Added Tx queue TEID */
- /* high bit set means dynamic, use accessor routines to read/write.
- * hardware supports 4us/2us resolution for the ITR registers.
- * these values always store the USER setting, and must be converted
- * before programming to a register.
- */
- u16 itr_setting;
-
u16 count; /* Number of descriptors */
u16 reg_idx; /* HW register index of the ring */
@@ -178,6 +172,7 @@ struct ice_ring_container {
unsigned int total_bytes; /* total bytes processed this int */
unsigned int total_pkts; /* total packets processed this int */
enum ice_latency_range latency_range;
+ int itr_idx; /* index in the interrupt vector */
u16 itr;
};
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 20de2034e153..c25e486706f3 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1678,26 +1678,30 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg)
/* lookout for the invalid queue index */
qmap = map->rxq_map;
for_each_set_bit(vsi_q_id, &qmap, ICE_MAX_BASE_QS_PER_VF) {
+ struct ice_q_vector *q_vector;
+
if (!ice_vc_isvalid_q_id(vf, vsi_id, vsi_q_id)) {
aq_ret = ICE_ERR_PARAM;
goto error_param;
}
- vsi->q_vectors[i]->num_ring_rx++;
- vsi->rx_rings[vsi_q_id]->itr_setting =
- map->rxitr_idx;
- vsi->rx_rings[vsi_q_id]->q_vector = vsi->q_vectors[i];
+ q_vector = vsi->q_vectors[i];
+ q_vector->num_ring_rx++;
+ q_vector->rx.itr_idx = map->rxitr_idx;
+ vsi->rx_rings[vsi_q_id]->q_vector = q_vector;
}
qmap = map->txq_map;
for_each_set_bit(vsi_q_id, &qmap, ICE_MAX_BASE_QS_PER_VF) {
+ struct ice_q_vector *q_vector;
+
if (!ice_vc_isvalid_q_id(vf, vsi_id, vsi_q_id)) {
aq_ret = ICE_ERR_PARAM;
goto error_param;
}
- vsi->q_vectors[i]->num_ring_tx++;
- vsi->tx_rings[vsi_q_id]->itr_setting =
- map->txitr_idx;
- vsi->tx_rings[vsi_q_id]->q_vector = vsi->q_vectors[i];
+ q_vector = vsi->q_vectors[i];
+ q_vector->num_ring_tx++;
+ q_vector->tx.itr_idx = map->txitr_idx;
+ vsi->tx_rings[vsi_q_id]->q_vector = q_vector;
}
}
--
2.17.1
Powered by blists - more mailing lists