| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181004143124.11607-6-saeedm@mellanox.com>
Date: Thu, 4 Oct 2018 07:31:24 -0700
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Jiri Pirko <jiri@...lanox.com>, netdev@...r.kernel.org,
Feras Daoud <ferasda@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 5/5] net/mlx5: Add Fast teardown support
From: Feras Daoud <ferasda@...lanox.com>
Today mlx5 devices support two teardown modes:
1- Regular teardown
2- Force teardown
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
Signed-off-by: Feras Daoud <ferasda@...lanox.com>
Reviewed-by: Majd Dibbiny <majd@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/fw.c | 50 ++++++++++++++++++-
.../net/ethernet/mellanox/mlx5/core/health.c | 25 ++++++----
.../net/ethernet/mellanox/mlx5/core/main.c | 29 +++++++----
.../ethernet/mellanox/mlx5/core/mlx5_core.h | 12 +++++
include/linux/mlx5/device.h | 4 ++
include/linux/mlx5/mlx5_ifc.h | 6 ++-
6 files changed, 103 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
index 41ad24f0de2c..1ab6f7e3bec6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
@@ -250,7 +250,7 @@ int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
if (ret)
return ret;
- force_state = MLX5_GET(teardown_hca_out, out, force_state);
+ force_state = MLX5_GET(teardown_hca_out, out, state);
if (force_state == MLX5_TEARDOWN_HCA_OUT_FORCE_STATE_FAIL) {
mlx5_core_warn(dev, "teardown with force mode failed, doing normal teardown\n");
return -EIO;
@@ -259,6 +259,54 @@ int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev)
return 0;
}
+#define MLX5_FAST_TEARDOWN_WAIT_MS 3000
+int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *dev)
+{
+ unsigned long end, delay_ms = MLX5_FAST_TEARDOWN_WAIT_MS;
+ u32 out[MLX5_ST_SZ_DW(teardown_hca_out)] = {0};
+ u32 in[MLX5_ST_SZ_DW(teardown_hca_in)] = {0};
+ int state;
+ int ret;
+
+ if (!MLX5_CAP_GEN(dev, fast_teardown)) {
+ mlx5_core_dbg(dev, "fast teardown is not supported in the firmware\n");
+ return -EOPNOTSUPP;
+ }
+
+ MLX5_SET(teardown_hca_in, in, opcode, MLX5_CMD_OP_TEARDOWN_HCA);
+ MLX5_SET(teardown_hca_in, in, profile,
+ MLX5_TEARDOWN_HCA_IN_PROFILE_PREPARE_FAST_TEARDOWN);
+
+ ret = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+ if (ret)
+ return ret;
+
+ state = MLX5_GET(teardown_hca_out, out, state);
+ if (state == MLX5_TEARDOWN_HCA_OUT_FORCE_STATE_FAIL) {
+ mlx5_core_warn(dev, "teardown with fast mode failed\n");
+ return -EIO;
+ }
+
+ mlx5_set_nic_state(dev, MLX5_NIC_IFC_DISABLED);
+
+ /* Loop until device state turns to disable */
+ end = jiffies + msecs_to_jiffies(delay_ms);
+ do {
+ if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
+ break;
+
+ cond_resched();
+ } while (!time_after(jiffies, end));
+
+ if (mlx5_get_nic_state(dev) != MLX5_NIC_IFC_DISABLED) {
+ dev_err(&dev->pdev->dev, "NIC IFC still %d after %lums.\n",
+ mlx5_get_nic_state(dev), delay_ms);
+ return -EIO;
+ }
+
+ return 0;
+}
+
enum mlxsw_reg_mcc_instruction {
MLX5_REG_MCC_INSTRUCTION_LOCK_UPDATE_HANDLE = 0x01,
MLX5_REG_MCC_INSTRUCTION_RELEASE_UPDATE_HANDLE = 0x02,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index 9f39aeca863f..43118de8ee99 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -58,23 +58,26 @@ enum {
MLX5_HEALTH_SYNDR_HIGH_TEMP = 0x10
};
-enum {
- MLX5_NIC_IFC_FULL = 0,
- MLX5_NIC_IFC_DISABLED = 1,
- MLX5_NIC_IFC_NO_DRAM_NIC = 2,
- MLX5_NIC_IFC_INVALID = 3
-};
-
enum {
MLX5_DROP_NEW_HEALTH_WORK,
MLX5_DROP_NEW_RECOVERY_WORK,
};
-static u8 get_nic_state(struct mlx5_core_dev *dev)
+u8 mlx5_get_nic_state(struct mlx5_core_dev *dev)
{
return (ioread32be(&dev->iseg->cmdq_addr_l_sz) >> 8) & 3;
}
+void mlx5_set_nic_state(struct mlx5_core_dev *dev, u8 state)
+{
+ u32 cur_cmdq_addr_l_sz;
+
+ cur_cmdq_addr_l_sz = ioread32be(&dev->iseg->cmdq_addr_l_sz);
+ iowrite32be((cur_cmdq_addr_l_sz & 0xFFFFF000) |
+ state << MLX5_NIC_IFC_OFFSET,
+ &dev->iseg->cmdq_addr_l_sz);
+}
+
static void trigger_cmd_completions(struct mlx5_core_dev *dev)
{
unsigned long flags;
@@ -103,7 +106,7 @@ static int in_fatal(struct mlx5_core_dev *dev)
struct mlx5_core_health *health = &dev->priv.health;
struct health_buffer __iomem *h = health->health;
- if (get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
+ if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
return 1;
if (ioread32be(&h->fw_ver) == 0xffffffff)
@@ -133,7 +136,7 @@ void mlx5_enter_error_state(struct mlx5_core_dev *dev, bool force)
static void mlx5_handle_bad_state(struct mlx5_core_dev *dev)
{
- u8 nic_interface = get_nic_state(dev);
+ u8 nic_interface = mlx5_get_nic_state(dev);
switch (nic_interface) {
case MLX5_NIC_IFC_FULL:
@@ -168,7 +171,7 @@ static void health_recover(struct work_struct *work)
priv = container_of(health, struct mlx5_priv, health);
dev = container_of(priv, struct mlx5_core_dev, priv);
- nic_state = get_nic_state(dev);
+ nic_state = mlx5_get_nic_state(dev);
if (nic_state == MLX5_NIC_IFC_INVALID) {
dev_err(&dev->pdev->dev, "health recovery flow aborted since the nic state is invalid\n");
return;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index b5e9f664fc66..28132c7dc05f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1594,12 +1594,17 @@ static const struct pci_error_handlers mlx5_err_handler = {
static int mlx5_try_fast_unload(struct mlx5_core_dev *dev)
{
- int ret;
+ bool fast_teardown = false, force_teardown = false;
+ int ret = 1;
+
+ fast_teardown = MLX5_CAP_GEN(dev, fast_teardown);
+ force_teardown = MLX5_CAP_GEN(dev, force_teardown);
+
+ mlx5_core_dbg(dev, "force teardown firmware support=%d\n", force_teardown);
+ mlx5_core_dbg(dev, "fast teardown firmware support=%d\n", fast_teardown);
- if (!MLX5_CAP_GEN(dev, force_teardown)) {
- mlx5_core_dbg(dev, "force teardown is not supported in the firmware\n");
+ if (!fast_teardown && !force_teardown)
return -EOPNOTSUPP;
- }
if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) {
mlx5_core_dbg(dev, "Device in internal error state, giving up\n");
@@ -1612,13 +1617,19 @@ static int mlx5_try_fast_unload(struct mlx5_core_dev *dev)
mlx5_drain_health_wq(dev);
mlx5_stop_health_poll(dev, false);
+ ret = mlx5_cmd_fast_teardown_hca(dev);
+ if (!ret)
+ goto succeed;
+
ret = mlx5_cmd_force_teardown_hca(dev);
- if (ret) {
- mlx5_core_dbg(dev, "Firmware couldn't do fast unload error: %d\n", ret);
- mlx5_start_health_poll(dev);
- return ret;
- }
+ if (!ret)
+ goto succeed;
+
+ mlx5_core_dbg(dev, "Firmware couldn't do fast unload error: %d\n", ret);
+ mlx5_start_health_poll(dev);
+ return ret;
+succeed:
mlx5_enter_error_state(dev, true);
/* Some platforms requiring freeing the IRQ's in the shutdown
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index b4134fa0bba3..cc298527baf1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -95,6 +95,8 @@ int mlx5_query_board_id(struct mlx5_core_dev *dev);
int mlx5_cmd_init_hca(struct mlx5_core_dev *dev, uint32_t *sw_owner_id);
int mlx5_cmd_teardown_hca(struct mlx5_core_dev *dev);
int mlx5_cmd_force_teardown_hca(struct mlx5_core_dev *dev);
+int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *dev);
+
void mlx5_core_event(struct mlx5_core_dev *dev, enum mlx5_dev_event event,
unsigned long param);
void mlx5_core_page_fault(struct mlx5_core_dev *dev,
@@ -214,4 +216,14 @@ int mlx5_lag_allow(struct mlx5_core_dev *dev);
int mlx5_lag_forbid(struct mlx5_core_dev *dev);
void mlx5_reload_interface(struct mlx5_core_dev *mdev, int protocol);
+
+enum {
+ MLX5_NIC_IFC_FULL = 0,
+ MLX5_NIC_IFC_DISABLED = 1,
+ MLX5_NIC_IFC_NO_DRAM_NIC = 2,
+ MLX5_NIC_IFC_INVALID = 3
+};
+
+u8 mlx5_get_nic_state(struct mlx5_core_dev *dev);
+void mlx5_set_nic_state(struct mlx5_core_dev *dev, u8 state);
#endif /* __MLX5_CORE_H__ */
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 11fa4e66afc5..e9b502d5bcc1 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -504,6 +504,10 @@ struct health_buffer {
__be16 ext_synd;
};
+enum mlx5_cmd_addr_l_sz_offset {
+ MLX5_NIC_IFC_OFFSET = 8,
+};
+
struct mlx5_init_seg {
__be32 fw_rev;
__be32 cmdif_rev_fw_sub;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index f043d65b9bac..6e8a882052b1 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -896,7 +896,8 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 log_max_mkey[0x6];
u8 reserved_at_f0[0x8];
u8 dump_fill_mkey[0x1];
- u8 reserved_at_f9[0x3];
+ u8 reserved_at_f9[0x2];
+ u8 fast_teardown[0x1];
u8 log_max_eq[0x4];
u8 max_indirection[0x8];
@@ -3352,12 +3353,13 @@ struct mlx5_ifc_teardown_hca_out_bits {
u8 reserved_at_40[0x3f];
- u8 force_state[0x1];
+ u8 state[0x1];
};
enum {
MLX5_TEARDOWN_HCA_IN_PROFILE_GRACEFUL_CLOSE = 0x0,
MLX5_TEARDOWN_HCA_IN_PROFILE_FORCE_CLOSE = 0x1,
+ MLX5_TEARDOWN_HCA_IN_PROFILE_PREPARE_FAST_TEARDOWN = 0x2,
};
struct mlx5_ifc_teardown_hca_in_bits {
--
2.17.1
Powered by blists - more mailing lists