lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181005070440.3294-1-maxime.chevallier@bootlin.com>
Date:   Fri,  5 Oct 2018 09:04:40 +0200
From:   Maxime Chevallier <maxime.chevallier@...tlin.com>
To:     davem@...emloft.net
Cc:     Maxime Chevallier <maxime.chevallier@...tlin.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Antoine Tenart <antoine.tenart@...tlin.com>,
        thomas.petazzoni@...tlin.com, gregory.clement@...tlin.com,
        miquel.raynal@...tlin.com, nadavh@...vell.com, stefanc@...vell.com,
        ymarkman@...vell.com, mw@...ihalf.com
Subject: [PATCH net v2] net: mvpp2: Extract the correct ethtype from the skb for tx csum offload

When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.

The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
V2: Use htons on values that can be swapped at compile-time, following
    Yan's comment. Fix the "Fixes" tag and a typo, following Sergei's comment.

 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 38cc01beea79..a74002b43b51 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1725,7 +1725,7 @@ static void mvpp2_txq_desc_put(struct mvpp2_tx_queue *txq)
 }
 
 /* Set Tx descriptors fields relevant for CSUM calculation */
-static u32 mvpp2_txq_desc_csum(int l3_offs, int l3_proto,
+static u32 mvpp2_txq_desc_csum(int l3_offs, __be16 l3_proto,
 			       int ip_hdr_len, int l4_proto)
 {
 	u32 command;
@@ -2600,14 +2600,15 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb)
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		int ip_hdr_len = 0;
 		u8 l4_proto;
+		__be16 l3_proto = vlan_get_protocol(skb);
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (l3_proto == htons(ETH_P_IP)) {
 			struct iphdr *ip4h = ip_hdr(skb);
 
 			/* Calculate IPv4 checksum and L4 checksum */
 			ip_hdr_len = ip4h->ihl;
 			l4_proto = ip4h->protocol;
-		} else if (skb->protocol == htons(ETH_P_IPV6)) {
+		} else if (l3_proto == htons(ETH_P_IPV6)) {
 			struct ipv6hdr *ip6h = ipv6_hdr(skb);
 
 			/* Read l4_protocol from one of IPv6 extra headers */
@@ -2619,7 +2620,7 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb)
 		}
 
 		return mvpp2_txq_desc_csum(skb_network_offset(skb),
-				skb->protocol, ip_hdr_len, l4_proto);
+					   l3_proto, ip_hdr_len, l4_proto);
 	}
 
 	return MVPP2_TXD_L4_CSUM_NOT | MVPP2_TXD_IP_CSUM_DISABLE;
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ