netdev - [PATCH v2 lora-next 1/4] net: lora: sx1301: convert burst spi functions to regmap raw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1539089532-2481-2-git-send-email-ben.whitten@lairdtech.com>
Date:   Tue,  9 Oct 2018 13:52:09 +0100
From:   Ben Whitten <ben.whitten@...il.com>
To:     afaerber@...e.de
Cc:     starnight@...cu.edu.tw, hasnain.virk@....com,
        netdev@...r.kernel.org, liuxuenetmail@...il.com, shess@...sware.de,
        Ben Whitten <ben.whitten@...rdtech.com>
Subject: [PATCH v2 lora-next 1/4] net: lora: sx1301: convert burst spi functions to regmap raw

As we have caching disabled we can access the regmap using raw for our
firmware reading and writing bursts.
We also remove the now defunct spi element from the structure as this
completes the move to regmap.

Signed-off-by: Ben Whitten <ben.whitten@...rdtech.com>
---
 drivers/net/lora/sx1301.c | 26 +++++++++++++++++---------
 drivers/net/lora/sx1301.h |  2 --
 2 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/net/lora/sx1301.c b/drivers/net/lora/sx1301.c
index fd29258..5ab0e2d 100644
--- a/drivers/net/lora/sx1301.c
+++ b/drivers/net/lora/sx1301.c
@@ -76,19 +76,28 @@ static struct regmap_config sx1301_regmap_config = {
 
 static int sx1301_read_burst(struct sx1301_priv *priv, u8 reg, u8 *val, size_t len)
 {
-	u8 addr = reg & 0x7f;
-	return spi_write_then_read(priv->spi, &addr, 1, val, len);
+	size_t max;
+
+	max = regmap_get_raw_read_max(priv->regmap);
+	if (max && max < len) {
+		dev_err(priv->dev, "Burst greater then max raw read\n");
+		return -EINVAL;
+	}
+
+	return regmap_raw_read(priv->regmap, reg, val, len);
 }
 
 static int sx1301_write_burst(struct sx1301_priv *priv, u8 reg, const u8 *val, size_t len)
 {
-	u8 addr = reg | BIT(7);
-	struct spi_transfer xfr[2] = {
-		{ .tx_buf = &addr, .len = 1 },
-		{ .tx_buf = val, .len = len },
-	};
+	size_t max;
+
+	max = regmap_get_raw_write_max(priv->regmap);
+	if (max && max < len) {
+		dev_err(priv->dev, "Burst greater then max raw write\n");
+		return -EINVAL;
+	}
 
-	return spi_sync_transfer(priv->spi, xfr, 2);
+	return regmap_raw_write(priv->regmap, reg, val, len);
 }
 
 static int sx1301_soft_reset(struct sx1301_priv *priv)
@@ -566,7 +575,6 @@ static int sx1301_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, netdev);
 	priv->dev = &spi->dev;
-	priv->spi = spi;
 
 	priv->regmap = devm_regmap_init_spi(spi, &sx1301_regmap_config);
 	if (IS_ERR(priv->regmap)) {
diff --git a/drivers/net/lora/sx1301.h b/drivers/net/lora/sx1301.h
index e939c02..e6400f8 100644
--- a/drivers/net/lora/sx1301.h
+++ b/drivers/net/lora/sx1301.h
@@ -12,7 +12,6 @@
 #include <linux/regmap.h>
 #include <linux/gpio/consumer.h>
 #include <linux/lora/dev.h>
-#include <linux/spi/spi.h>
 
 #define SX1301_CHIP_VERSION 103
 
@@ -64,7 +63,6 @@
 struct sx1301_priv {
 	struct lora_dev_priv lora;
 	struct device		*dev;
-	struct spi_device	*spi;
 	struct gpio_desc *rst_gpio;
 	struct regmap		*regmap;
 };
-- 
2.7.4