netdev - [PATCH v3 lora-next 0/5] based on 4.19-rc7 migration to regmap and clk framewor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1539361567-3602-1-git-send-email-ben.whitten@lairdtech.com>
Date:   Fri, 12 Oct 2018 17:26:01 +0100
From:   Ben Whitten <ben.whitten@...il.com>
To:     afaerber@...e.de
Cc:     starnight@...cu.edu.tw, hasnain.virk@....com,
        netdev@...r.kernel.org, liuxuenetmail@...il.com, shess@...sware.de,
        Ben Whitten <ben.whitten@...rdtech.com>
Subject: [PATCH v3 lora-next 0/5] based on 4.19-rc7 migration to regmap and clk framewor

This series is designed to be applied to a lora-next which is based on
v4.19-rc7, not what is currently upstream, there were no additional changes
in this rebase.

In this series we add the write variant to regmap_noinc then use it within
the sx1301 driver to load firmware.

We complete the sx1301 migration to regmap by replacing the SPI burst read
and write with regmap_noinc_read and write.

The various fields of the sx1301 are converted to regmap to pass the read
modify write down to the regmap layer and reduce our code.
The downside is that in the cases of the hand optimised multiple field writes
at once within one register, however if it is desirable these can be replaced
with regmap_update_bits.

Apply the same regmap treatment for the radio device and allow it to register as
a clock provider, this clock is enabled when the lora link is brought up as it
is required prior to calibration of the concentrator.

modprobe lora-sx125x
lora-dev: init
sx1301 spi0.0: SX1301 module probed
sx125x_con spi0.0-a: SX125x version: 21
sx125x_con spi0.0-a: SX125x module probed
sx125x_con spi0.0-b: SX125x version: 21
sx125x_con spi0.0-b: registering clkout
sx125x_con spi0.0-b: SX125x module probed

ip link set lora0 up
sx125x_con spi0.0-b: enabling clkout

Ben Whitten (5):
  regmap: Add regmap_noinc_write API
  net: lora: sx1301: replace burst spi functions with regmap_noinc
  net: lora: sx1301: convert to using regmap fields for bit ops
  net: lora: sx125x: convert to regmap fields
  net: lora: sx125x sx1301: allow radio to register as a clk provider

 drivers/base/regmap/internal.h |   3 +
 drivers/base/regmap/regmap.c   |  77 ++++++++++++
 drivers/net/lora/sx125x.c      | 159 +++++++++++++++++++++++--
 drivers/net/lora/sx1301.c      | 257 ++++++++++++-----------------------------
 drivers/net/lora/sx1301.h      |  50 +++++++-
 include/linux/regmap.h         |  19 +++
 6 files changed, 369 insertions(+), 196 deletions(-)

-- 
2.7.4