netdev - Re: [RFC PATCH net-next 0/4] net: ethernet: ti: cpsw: fix vlan mcast

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <92ab4728-109f-01cc-09db-3da4d8c8e92e@ti.com>
Date:   Tue, 16 Oct 2018 14:38:33 -0500
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>, <davem@...emloft.net>
CC:     <linux-omap@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <alexander.h.duyck@...el.com>
Subject: Re: [RFC PATCH net-next 0/4] net: ethernet: ti: cpsw: fix vlan mcast



On 10/16/2018 01:20 PM, Ivan Khoronzhuk wrote:
> The cpsw holds separate mcast entires for vlan entries. At this moment
> driver adds only not vlan mcast addresses, omitting vlan/mcast entries.
> As result mcast for vlans doesn't work. It can be fixed by adding same
> mcast entries for every created vlan, but this patchseries uses more
> sophisticated way and allows to create mcast entries only for vlans
> that really require it. Generic functions from this series can be
> reused for fixing vlan and macvlan unicast.

I assume this is first of all for dual_mac mode.

> 
> Simple example of ALE table before and after this series, having same
> mcast entries as for vlan 100 as for real device (reserved vlan 2),
> and one mcast address only for vlan 100 - 01:1b:19:00:00:00.
> 
[...]

> vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5, mem_list = 0x5
> ucast, vid = 100, addr = 74:da:ea:47:7d:9d, persistant, port_num = 0x0
> mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, port_mask = 0x1
> mcast, vid = 100, addr = 33:33:00:00:00:01, port_mask = 0x1
> mcast, vid = 100, addr = 01:00:5e:00:00:01, port_mask = 0x1
> mcast, vid = 100, addr = 33:33:ff:47:7d:9d, port_mask = 0x1
> mcast, vid = 100, addr = 01:80:c2:00:00:00, port_mask = 0x1
> mcast, vid = 100, addr = 01:80:c2:00:00:03, port_mask = 0x1
> mcast, vid = 100, addr = 01:80:c2:00:00:0e, port_mask = 0x1
> mcast, vid = 100, addr = 33:33:00:00:00:fb, port_mask = 0x1
> mcast, vid = 100, addr = 33:33:00:01:00:03, port_mask = 0x1
> mcast, vid = 100, addr = 01:1b:19:00:00:00, port_mask = 0x1
> 			 ^^^
>      Here mcast entry (ptpl2), is added only for vlan 100
>      as it should be.
> 
> Based on net-next/master

Thank you.
For patches 2-4
Reviewed-by: Grygorii Strashko <grygorii.strashko@...com>

For patch 1 - I'm not sure, so it'd good to get more comments.

> 
> Ivan Khoronzhuk (4):
>    net: core: dev_addr_lists: add auxiliary func to handle reference
>      address updates
>    net: 8021q: vlan_core: allow use list of vlans for real device
>    net: ethernet: ti: cpsw: fix vlan mcast
>    net: ethernet: ti: cpsw: fix vlan configuration while down/up
> 
>   drivers/net/ethernet/ti/cpsw.c | 189 +++++++++++++++++++++++++++------
>   include/linux/if_vlan.h        |  10 ++
>   include/linux/netdevice.h      |  10 ++
>   net/8021q/vlan_core.c          |  27 +++++
>   net/core/dev_addr_lists.c      |  97 +++++++++++++++++
>   5 files changed, 303 insertions(+), 30 deletions(-)
> 

-- 
regards,
-grygorii