netdev - RE: [PATCH] net: ethernet:fec: Consistently use SPEED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 22 Oct 2018 02:41:45 +0000
From:   Andy Duan <fugang.duan@....com>
To:     Andrew Lunn <andrew@...n.ch>, David Miller <davem@...emloft.net>
CC:     "clabbe@...libre.com" <clabbe@...libre.com>,
        netdev <netdev@...r.kernel.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>
Subject: RE: [PATCH] net: ethernet:fec: Consistently use SPEED_ prefix

From: netdev-owner@...r.kernel.org <netdev-owner@...r.kernel.org>
> All other calls to phy_set_max_speed() use the SPEED_ prefix. Make the
> FEC driver follow this common pattern. This makes no different to
> generated code since SPEED_1000 is 1000, and SPEED_100 is 100.
> 

Please also add more information that was introduced by commit: 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed ")

Andy
> Reported-by: Corentin Labbe <clabbe@...libre.com>
> Signed-off-by: Andrew Lunn <andrew@...n.ch>
> ---
>  drivers/net/ethernet/freescale/fec_main.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index 6db69ba30dcd..b067eaf8b792 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -1948,7 +1948,7 @@ static int fec_enet_mii_probe(struct
> net_device *ndev)
> 
>  	/* mask with MAC supported features */
>  	if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
> -		phy_set_max_speed(phy_dev, 1000);
> +		phy_set_max_speed(phy_dev, SPEED_1000);
>  		phy_remove_link_mode(phy_dev,
>  				     ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
>  #if !defined(CONFIG_M5272)
> @@ -1956,7 +1956,7 @@ static int fec_enet_mii_probe(struct
> net_device *ndev)  #endif
>  	}
>  	else
> -		phy_set_max_speed(phy_dev, 100);
> +		phy_set_max_speed(phy_dev, SPEED_100);
> 
>  	fep->link = 0;
>  	fep->full_duplex = 0;
> --
> 2.19.0