netdev - [PATCH net-next v2 0/6] net/ncsi: Allow enabling multiple packages & channels

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181023215201.27315-1-sam@mendozajonas.com>
Date:   Wed, 24 Oct 2018 10:51:55 +1300
From:   Samuel Mendoza-Jonas <sam@...dozajonas.com>
To:     netdev@...r.kernel.org
Cc:     Samuel Mendoza-Jonas <sam@...dozajonas.com>,
        "David S . Miller" <davem@...emloft.net>, Justin.Lee1@...l.com,
        linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org
Subject: [PATCH net-next v2 0/6] net/ncsi: Allow enabling multiple packages & channels

This series extends the NCSI driver to configure multiple packages
and/or channels simultaneously. Since the RFC series this includes a few
extra changes to fix areas in the driver that either made this harder or
were roadblocks due to deviations from the NCSI specification.

Patches 1 & 2 fix two issues where the driver made assumptions about the
capabilities of the NCSI topology.
Patches 3 & 4 change some internal semantics slightly to make multi-mode
easier.
Patch 5 introduces a cleaner way of reconfiguring the NCSI configuration
and keeping track of channel states.
Patch 6 implements the main multi-package/multi-channel configuration,
configured via the Netlink interface.

Readers who have an interesting NCSI setup - especially multi-package
with HWA - please test! I think I've covered all permutations but I
don't have infinite hardware to test on.

Changes in v2:
- Updated use of the channel lock in ncsi_reset_dev(), making the
channel invisible and leaving the monitor check to
ncsi_stop_channel_monitor().
- Fixed ncsi_channel_is_tx() to consider the state of channels in other
packages.

Samuel Mendoza-Jonas (6):
  net/ncsi: Don't enable all channels when HWA available
  net/ncsi: Probe single packages to avoid conflict
  net/ncsi: Don't deselect package in suspend if active
  net/ncsi: Don't mark configured channels inactive
  net/ncsi: Reset channel state in ncsi_start_dev()
  net/ncsi: Configure multi-package, multi-channel modes with failover

 include/uapi/linux/ncsi.h |  15 ++
 net/ncsi/internal.h       |  19 +-
 net/ncsi/ncsi-aen.c       |  63 ++++--
 net/ncsi/ncsi-manage.c    | 453 +++++++++++++++++++++++++-------------
 net/ncsi/ncsi-netlink.c   | 229 ++++++++++++++++---
 net/ncsi/ncsi-rsp.c       |   2 +-
 6 files changed, 578 insertions(+), 203 deletions(-)

-- 
2.19.1