netdev - [PATCH net v2 1/3] net: socionext: Stop PHY before resetting netsec

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181023112428.6785-2-masahisa.kojima@linaro.org>
Date:   Tue, 23 Oct 2018 20:24:26 +0900
From:   masahisa.kojima@...aro.org
To:     netdev@...r.kernel.org
Cc:     ilias.apalodimas@...aro.org, jaswinder.singh@...aro.org,
        ard.biesheuvel@...aro.org, osaki.yoshitoyo@...ionext.com,
        Masahisa Kojima <masahisa.kojima@...aro.org>
Subject: [PATCH net v2 1/3] net: socionext: Stop PHY before resetting netsec

From: Masahisa Kojima <masahisa.kojima@...aro.org>

In ndo_stop, driver resets the netsec ethernet controller IP.
When the netsec IP is reset, HW running mode turns to NRM mode
and driver has to wait until this mode transition completes.

But mode transition to NRM will not complete if the PHY is
in normal operation state. Netsec IP requires PHY is in
power down state when it is reset.

This modification stops the PHY before resetting netsec.

Together with this modification, phy_addr is stored in netsec_priv
structure because ndev->phydev is not yet ready in ndo_init.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <masahisa.kojima@...aro.org>
Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@...ionext.com>
---
changes in v2:
 - change the place to perform the PHY power down
 - use the MACROs defiend in include/uapi/linux/mii.h

 drivers/net/ethernet/socionext/netsec.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 7aa5ebb6766c..829ed2718b22 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -274,6 +274,7 @@ struct netsec_priv {
 	struct clk *clk;
 	u32 msg_enable;
 	u32 freq;
+	u32 phy_addr;
 	bool rx_cksum_offload_flag;
 };
 
@@ -1340,11 +1341,11 @@ static int netsec_netdev_stop(struct net_device *ndev)
 	netsec_uninit_pkt_dring(priv, NETSEC_RING_TX);
 	netsec_uninit_pkt_dring(priv, NETSEC_RING_RX);
 
-	ret = netsec_reset_hardware(priv, false);
-
 	phy_stop(ndev->phydev);
 	phy_disconnect(ndev->phydev);
 
+	ret = netsec_reset_hardware(priv, false);
+
 	pm_runtime_put_sync(priv->dev);
 
 	return ret;
@@ -1354,6 +1355,7 @@ static int netsec_netdev_init(struct net_device *ndev)
 {
 	struct netsec_priv *priv = netdev_priv(ndev);
 	int ret;
+	u16 data;
 
 	ret = netsec_alloc_dring(priv, NETSEC_RING_TX);
 	if (ret)
@@ -1363,6 +1365,11 @@ static int netsec_netdev_init(struct net_device *ndev)
 	if (ret)
 		goto err1;
 
+	/* set phy power down */
+	data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) |
+		BMCR_PDOWN;
+	netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+
 	ret = netsec_reset_hardware(priv, true);
 	if (ret)
 		goto err2;
@@ -1412,7 +1419,7 @@ static const struct net_device_ops netsec_netdev_ops = {
 };
 
 static int netsec_of_probe(struct platform_device *pdev,
-			   struct netsec_priv *priv)
+			   struct netsec_priv *priv, u32 *phy_addr)
 {
 	priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
 	if (!priv->phy_np) {
@@ -1420,6 +1427,8 @@ static int netsec_of_probe(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	*phy_addr = of_mdio_parse_addr(&pdev->dev, priv->phy_np);
+
 	priv->clk = devm_clk_get(&pdev->dev, NULL); /* get by 'phy_ref_clk' */
 	if (IS_ERR(priv->clk)) {
 		dev_err(&pdev->dev, "phy_ref_clk not found\n");
@@ -1620,12 +1629,14 @@ static int netsec_probe(struct platform_device *pdev)
 	}
 
 	if (dev_of_node(&pdev->dev))
-		ret = netsec_of_probe(pdev, priv);
+		ret = netsec_of_probe(pdev, priv, &phy_addr);
 	else
 		ret = netsec_acpi_probe(pdev, priv, &phy_addr);
 	if (ret)
 		goto free_ndev;
 
+	priv->phy_addr = phy_addr;
+
 	if (!priv->freq) {
 		dev_err(&pdev->dev, "missing PHY reference clock frequency\n");
 		ret = -ENODEV;
-- 
2.14.2