Date:   Fri,  9 Nov 2018 00:05:41 +0530
From:   sunil.kovvuri@...il.com
To:     netdev@...r.kernel.org, davem@...emloft.net
Cc:     arnd@...db.de, linux-soc@...r.kernel.org,
        Sunil Goutham <sgoutham@...vell.com>
Subject: [PATCH 00/20] octeontx2-af: NPC MCAM support and FLR handling

From: Sunil Goutham <sgoutham@...vell.com>

This patchset is a continuation to earlier submitted three patch
series to add a new driver for Marvell's OcteonTX2 SOC's
Resource virtualization unit (RVU) admin function driver.

1. octeontx2-af: Add RVU Admin Function driver
   https://www.spinics.net/lists/netdev/msg528272.html
2. octeontx2-af: NPA and NIX blocks initialization
   https://www.spinics.net/lists/netdev/msg529163.html
3. octeontx2-af: NPC parser and NIX blocks initialization
   https://www.spinics.net/lists/netdev/msg530252.html

This patch series adds support for below
RVU generic:
- Function Level Reset irq handler
  When FLR is triggered for PFs, AF receives interrupt.
  This patchset adds logic for cleaning up of NPA, NIX
  and NPC block resources being used by PF.

- Mailbox communication between AF and it's VFs.
  Unlike VFs of PF1-PFn, AF which is PF0 can communicate 
  with it's VFs directly. Added support for the same.

- AF's VFs IO configuration
  These VFs are mapped to use internal HW loopback channels
  instead of CGX LMACs. Each pair of VFs work as two of ends
  of hardwired interfaces. VF0's TX is VF1's Rx & viceversa.

NPC block:
- MCAM entry management
  Alloc/Free of contiguous/non-contiguous and lower/higher 
  priority MCAM entry allocation and programming support.
- MCAM counters management and map/unmap with MCAM entries
- Default KEY extract profile
- HW errata workarounds

NIX block:
- Minimum and maximum allowed packet length config
- HW errata workarounds

Few more changes like shift to use mutex instead of spinlock etc
are done in this patchset.

Geetha sowjanya (2):
  octeontx2-af: Add FLR interrupt handler
  octeontx2-af: Teardown NPA, NIX LF upon receiving FLR

Kiran Kumar (1):
  octeontx2-af: Support to get NIX HW constants from AF

Linu Cherian (1):
  octeontx2-af: Add interrupt handlers for Master Enable event

Santosh Shukla (1):
  octeontx2-af: Add MKEX default profile

Stanislaw Kardach (1):
  octeontx2-af: Relax resource lock into mutex

Sunil Goutham (10):
  octeontx2-af: Support to modify min/max allowed packet lengths
  octeontx2-af: NPC MCAM entry alloc/free support
  octeontx2-af: MCAM entry installation support
  octeontx2-af: Support for NPC MCAM counters
  octeontx2-af: Map or unmap NPC MCAM entry and counter
  octeontx2-af: Alloc and config NPC MCAM entry at a time
  octeontx2-af: Support to enable/disable default MCAM entries
  octeontx2-af: Verify NPA/SSO/NIX PF_FUNC mapping
  octeontx2-af: Add FLR handling support for AF's VFs
  octeontx2-af: Workarounds for HW errata

Tomasz Duszynski (4):
  octeontx2-af: Add support for stripping STAG/CTAG
  octeontx2-af: Mbox communication support btw AF and it's VFs
  octeontx2-af: Enable sriov on AF to create VFs
  octeontx2-af: Configure AF VFs to talk over LBK channels

 drivers/net/ethernet/marvell/octeontx2/af/cgx.h    |    1 +
 drivers/net/ethernet/marvell/octeontx2/af/common.h |    7 +
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  200 ++-
 drivers/net/ethernet/marvell/octeontx2/af/npc.h    |   30 +
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |  937 +++++++++++--
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  118 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |    6 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |  495 ++++++-
 .../net/ethernet/marvell/octeontx2/af/rvu_npa.c    |   17 +
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    | 1386 +++++++++++++++++++-
 10 files changed, 2975 insertions(+), 222 deletions(-)

-- 
2.7.4

Powered by blists - more mailing lists