[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181114231032.4013-8-jeffrey.t.kirsher@intel.com>
Date: Wed, 14 Nov 2018 15:10:25 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Patryk Małek <patryk.malek@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 07/14] i40e: Allow disabling FW LLDP on X722 devices
From: Patryk Małek <patryk.malek@...el.com>
This patch allows disabling FW LLDP agent on X722 devices.
It also changes a source of information for this feature from
pf->hw_features to pf->hw.flags which are set in i40e_init_adminq.
Signed-off-by: Patryk Małek <patryk.malek@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 -
drivers/net/ethernet/intel/i40e/i40e_common.c | 3 +++
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 13 +++++++------
drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++++--------
4 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 5595a4614206..cda37d7ae5d6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -495,7 +495,6 @@ struct i40e_pf {
#define I40E_HW_STOP_FW_LLDP BIT(16)
#define I40E_HW_PORT_ID_VALID BIT(17)
#define I40E_HW_RESTART_AUTONEG BIT(18)
-#define I40E_HW_STOPPABLE_FW_LLDP BIT(19)
u32 flags;
#define I40E_FLAG_RX_CSUM_ENABLED BIT(0)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 85f75b5978fc..97a9b1fb4763 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -3723,6 +3723,9 @@ i40e_aq_set_dcb_parameters(struct i40e_hw *hw, bool dcb_enable,
(struct i40e_aqc_set_dcb_parameters *)&desc.params.raw;
i40e_status status;
+ if (!(hw->flags & I40E_HW_FLAG_FW_LLDP_STOPPABLE))
+ return I40E_ERR_DEVICE_NOT_SUPPORTED;
+
i40e_fill_default_direct_cmd_desc(&desc,
i40e_aqc_opc_set_dcb_parameters);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 9c1211ad2c6b..311edac272aa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -4660,14 +4660,15 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
return -EOPNOTSUPP;
/* If the driver detected FW LLDP was disabled on init, this flag could
- * be set, however we do not support _changing_ the flag if NPAR is
- * enabled or FW API version < 1.7. There are situations where older
- * FW versions/NPAR enabled PFs could disable LLDP, however we _must_
- * not allow the user to enable/disable LLDP with this flag on
- * unsupported FW versions.
+ * be set, however we do not support _changing_ the flag:
+ * - on XL710 if NPAR is enabled or FW API version < 1.7
+ * - on X722 with FW API version < 1.6
+ * There are situations where older FW versions/NPAR enabled PFs could
+ * disable LLDP, however we _must_ not allow the user to enable/disable
+ * LLDP with this flag on unsupported FW versions.
*/
if (changed_flags & I40E_FLAG_DISABLE_FW_LLDP) {
- if (!(pf->hw_features & I40E_HW_STOPPABLE_FW_LLDP)) {
+ if (!(pf->hw.flags & I40E_HW_FLAG_FW_LLDP_STOPPABLE)) {
dev_warn(&pf->pdev->dev,
"Device does not support changing FW LLDP\n");
return -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index dbd6fffd9b85..d4461eec26bd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11331,16 +11331,15 @@ static int i40e_sw_init(struct i40e_pf *pf)
/* IWARP needs one extra vector for CQP just like MISC.*/
pf->num_iwarp_msix = (int)num_online_cpus() + 1;
}
- /* Stopping the FW LLDP engine is only supported on the
- * XL710 with a FW ver >= 1.7. Also, stopping FW LLDP
- * engine is not supported if NPAR is functioning on this
- * part
+ /* Stopping FW LLDP engine is supported on XL710 and X722
+ * starting from FW versions determined in i40e_init_adminq.
+ * Stopping the FW LLDP engine is not supported on XL710
+ * if NPAR is functioning so unset this hw flag in this case.
*/
if (pf->hw.mac.type == I40E_MAC_XL710 &&
- !pf->hw.func_caps.npar_enable &&
- (pf->hw.aq.api_maj_ver > 1 ||
- (pf->hw.aq.api_maj_ver == 1 && pf->hw.aq.api_min_ver > 6)))
- pf->hw_features |= I40E_HW_STOPPABLE_FW_LLDP;
+ pf->hw.func_caps.npar_enable &&
+ (pf->hw.flags & I40E_HW_FLAG_FW_LLDP_STOPPABLE))
+ pf->hw.flags &= ~I40E_HW_FLAG_FW_LLDP_STOPPABLE;
#ifdef CONFIG_PCI_IOV
if (pf->hw.func_caps.num_vfs && pf->hw.partition_id == 1) {
--
2.19.1
Powered by blists - more mailing lists