[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <acc97e5e-efa9-a44c-ea87-09135c6c12b6@ti.com>
Date: Wed, 14 Nov 2018 14:18:14 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Russell King <rmk+kernel@...linux.org.uk>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>
CC: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Jason Cooper <jason@...edaemon.net>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>
Subject: Re: [RFC PATCH 5/6] net: marvell: neta: add support for 2500base-X
Hi,
On 12/11/18 6:01 PM, Russell King wrote:
> Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
> ---
> drivers/net/ethernet/marvell/mvneta.c | 58 ++++++++++++++++++++++++++++++-----
> 1 file changed, 51 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 5bfd349bf41a..7305d4cc0630 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -27,6 +27,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_mdio.h>
> #include <linux/of_net.h>
> +#include <linux/phy/phy.h>
> #include <linux/phy.h>
> #include <linux/phylink.h>
> #include <linux/platform_device.h>
> @@ -437,6 +438,7 @@ struct mvneta_port {
> struct device_node *dn;
> unsigned int tx_csum_limit;
> struct phylink *phylink;
> + struct phy *comphy;
>
> struct mvneta_bm *bm_priv;
> struct mvneta_bm_pool *pool_long;
> @@ -3150,6 +3152,8 @@ static void mvneta_start_dev(struct mvneta_port *pp)
> {
> int cpu;
>
> + WARN_ON(phy_power_on(pp->comphy));
> +
> mvneta_max_rx_size_set(pp, pp->pkt_size);
> mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
>
> @@ -3212,6 +3216,8 @@ static void mvneta_stop_dev(struct mvneta_port *pp)
>
> mvneta_tx_reset(pp);
> mvneta_rx_reset(pp);
> +
> + WARN_ON(phy_power_off(pp->comphy));
> }
>
> static void mvneta_percpu_enable(void *arg)
> @@ -3337,6 +3343,7 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
> static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
> struct phylink_link_state *state)
> {
> + struct mvneta_port *pp = netdev_priv(ndev);
> __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
>
> /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
> @@ -3357,14 +3364,14 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
> /* Asymmetric pause is unsupported */
> phylink_set(mask, Pause);
>
> - /* We cannot use 1Gbps when using the 2.5G interface. */
> - if (state->interface == PHY_INTERFACE_MODE_2500BASEX) {
> - phylink_set(mask, 2500baseT_Full);
> - phylink_set(mask, 2500baseX_Full);
> - } else {
> + /* Half-duplex at speeds higher than 100Mbit is unsupported */
> + if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) {
> phylink_set(mask, 1000baseT_Full);
> phylink_set(mask, 1000baseX_Full);
> }
> + if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
> + phylink_set(mask, 2500baseX_Full);
> + }
>
> if (!phy_interface_mode_is_8023z(state->interface)) {
> /* 10M and 100M are only supported in non-802.3z mode */
> @@ -3378,6 +3385,11 @@ static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
> __ETHTOOL_LINK_MODE_MASK_NBITS);
> bitmap_and(state->advertising, state->advertising, mask,
> __ETHTOOL_LINK_MODE_MASK_NBITS);
> +
> + /* We can only operate at 2500BaseX or 1000BaseX. If requested
> + * to advertise both, only report advertising at 2500BaseX.
> + */
> + phylink_helper_basex_speed(state);
> }
>
> static int mvneta_mac_link_state(struct net_device *ndev,
> @@ -3389,7 +3401,9 @@ static int mvneta_mac_link_state(struct net_device *ndev,
> gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
>
> if (gmac_stat & MVNETA_GMAC_SPEED_1000)
> - state->speed = SPEED_1000;
> + state->speed =
> + state->interface == PHY_INTERFACE_MODE_2500BASEX ?
> + SPEED_2500 : SPEED_1000;
> else if (gmac_stat & MVNETA_GMAC_SPEED_100)
> state->speed = SPEED_100;
> else
> @@ -3504,12 +3518,32 @@ static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
> MVNETA_GMAC_FORCE_LINK_DOWN);
> }
>
> +
> /* When at 2.5G, the link partner can send frames with shortened
> * preambles.
> */
> if (state->speed == SPEED_2500)
> new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
>
> + if (pp->comphy) {
> + enum phy_mode mode = PHY_MODE_INVALID;
> +
> + switch (state->interface) {
> + case PHY_INTERFACE_MODE_SGMII:
> + case PHY_INTERFACE_MODE_1000BASEX:
> + mode = PHY_MODE_SGMII;
> + break;
> + case PHY_INTERFACE_MODE_2500BASEX:
> + mode = PHY_MODE_2500SGMII;
> + break;
> + default:
> + break;
> + }
> +
> + if (mode != PHY_MODE_INVALID)
> + WARN_ON(phy_set_mode(pp->comphy, mode));
> + }
> +
> if (new_ctrl0 != gmac_ctrl0)
> mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
> if (new_ctrl2 != gmac_ctrl2)
> @@ -4411,7 +4445,7 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
> if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
> mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
> else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
> - phy_mode == PHY_INTERFACE_MODE_1000BASEX)
> + phy_interface_mode_is_8023z(phy_mode))
> mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
> else if (!phy_interface_mode_is_rgmii(phy_mode))
> return -EINVAL;
> @@ -4428,6 +4462,7 @@ static int mvneta_probe(struct platform_device *pdev)
> struct mvneta_port *pp;
> struct net_device *dev;
> struct phylink *phylink;
> + struct phy *comphy;
> const char *dt_mac_addr;
> char hw_mac_addr[ETH_ALEN];
> const char *mac_from;
> @@ -4453,6 +4488,14 @@ static int mvneta_probe(struct platform_device *pdev)
> goto err_free_irq;
> }
>
> + comphy = devm_of_phy_get(&pdev->dev, dn, NULL);
> + if (comphy == ERR_PTR(-EPROBE_DEFER)) {
> + err = -EPROBE_DEFER;
> + goto err_free_irq;
> + } else if (IS_ERR(comphy)) {
> + comphy = NULL;
> + }
devm_phy_optional_get can be used here instead.
Thanks
Kishon
Powered by blists - more mailing lists