| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181115173752.22482-1-pankaj.bansal@nxp.com>
Date: Thu, 15 Nov 2018 12:12:05 +0000
From: Pankaj Bansal <pankaj.bansal@....com>
To: Shawn Guo <shawnguo@...nel.org>, Leo Li <leoyang.li@....com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Pankaj Bansal <pankaj.bansal@....com>
Subject: [PATCH] arm64: dts: lx2160aqds: Add mdio mux nodes
The two external MDIO buses used to communicate with phy devices that
are external to SOC are muxed in LX2160AQDS board.
These buses can be routed to any one of the eight IO slots on
LX2160AQDS board depending on value in fpga register 0x54.
Additionally the external MDIO1 is used to communicate to the onboard
RGMII phy devices.
The mdio1 is controlled by bits 4-7 of fpga register and mdio2 is
controlled by bits 0-3 of fpga register.
Signed-off-by: Pankaj Bansal <pankaj.bansal@....com>
---
Notes:
This patch depends on following patches:
[1]https://patchwork.kernel.org/cover/10658863/
[2]https://patchwork.codeaurora.org/patch/637861/
.../boot/dts/freescale/fsl-lx2160a-qds.dts | 116 +++++++++++++++++
.../boot/dts/freescale/fsl-lx2160a.dtsi | 23 ++++
2 files changed, 139 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 8a0305a2b778..39aa2731ddfa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -54,6 +54,121 @@
&i2c0 {
status = "okay";
+ fpga@66 {
+ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-mux-1@54 {
+ mdio-parent-bus = <&emdio1>;
+ reg = <0x54>; /* BRDCFG4 */
+ mux-mask = <0xf8>; /* EMI1_MDIO */
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x00>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@c0 {
+ reg = <0xc0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@c8 {
+ reg = <0xc8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@d0 {
+ reg = <0xd0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@d8 {
+ reg = <0xd8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@e0 {
+ reg = <0xe0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@e8 {
+ reg = <0xe8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@f0 {
+ reg = <0xf0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@f8 {
+ reg = <0xf8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio-mux-2@54 {
+ mdio-parent-bus = <&emdio2>;
+ reg = <0x54>; /* BRDCFG4 */
+ mux-mask = <0x07>; /* EMI2_MDIO */
+ #address-cells=<1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x00>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@1 {
+ reg = <0x01>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@2 {
+ reg = <0x02>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@3 {
+ reg = <0x03>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@4 {
+ reg = <0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@5 {
+ reg = <0x05>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@6 {
+ reg = <0x06>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ mdio@7 {
+ reg = <0x07>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
@@ -118,3 +233,4 @@
&usb1 {
status = "okay";
};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6ce0677c3096..518882b05f03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -780,5 +780,28 @@
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
};
+ /* TODO: WRIOP (CCSR?) */
+ /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
+ emdio1: mdio@...B96000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B96000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ /* Not necessary on the QDS, but needed on the RDB*/
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
+ emdio2: mdio@...B97000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8B97000 0x0 0x1000>;
+ device_type = "mdio"; /* TODO: is this necessary? */
+ little-endian; /* force the driver in LE mode */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
+
--
2.17.1
Powered by blists - more mailing lists