| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1542279586-27252-10-git-send-email-sunil.kovvuri@gmail.com>
Date: Thu, 15 Nov 2018 16:29:34 +0530
From: sunil.kovvuri@...il.com
To: netdev@...r.kernel.org, davem@...emloft.net
Cc: arnd@...db.de, linux-soc@...r.kernel.org,
Sunil Goutham <sgoutham@...vell.com>
Subject: [PATCH v2 09/21] octeontx2-af: Alloc and config NPC MCAM entry at a time
From: Sunil Goutham <sgoutham@...vell.com>
A new mailbox message is added to support allocating a MCAM entry
along with a counter and configuring it in one go. This reduces
the amount of mailbox communication involved in installing a new
MCAM rule.
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 19 ++++++
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 3 +
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 72 ++++++++++++++++++++++
3 files changed, 94 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 2caf430..bc10110 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -173,6 +173,9 @@ M(NPC_MCAM_CLEAR_COUNTER, 0x6009, npc_mcam_clear_counter, \
M(NPC_MCAM_COUNTER_STATS, 0x600a, npc_mcam_counter_stats, \
npc_mcam_oper_counter_req, \
npc_mcam_oper_counter_rsp) \
+M(NPC_MCAM_ALLOC_AND_WRITE_ENTRY, 0x600b, npc_mcam_alloc_and_write_entry, \
+ npc_mcam_alloc_and_write_entry_req, \
+ npc_mcam_alloc_and_write_entry_rsp) \
/* NIX mbox IDs (range 0x8000 - 0xFFFF) */ \
M(NIX_LF_ALLOC, 0x8000, nix_lf_alloc, \
nix_lf_alloc_req, nix_lf_alloc_rsp) \
@@ -680,4 +683,20 @@ struct npc_mcam_unmap_counter_req {
u8 all; /* Unmap all entries using this counter ? */
};
+struct npc_mcam_alloc_and_write_entry_req {
+ struct mbox_msghdr hdr;
+ struct mcam_entry entry_data;
+ u16 ref_entry;
+ u8 priority; /* Lower or higher w.r.t ref_entry */
+ u8 intf; /* Rx or Tx interface */
+ u8 enable_entry;/* Enable this MCAM entry ? */
+ u8 alloc_cntr; /* Allocate counter and map ? */
+};
+
+struct npc_mcam_alloc_and_write_entry_rsp {
+ struct mbox_msghdr hdr;
+ u16 entry;
+ u16 cntr;
+};
+
#endif /* MBOX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index e34f1bf..ca13c16 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -412,4 +412,7 @@ int rvu_mbox_handler_npc_mcam_unmap_counter(struct rvu *rvu,
int rvu_mbox_handler_npc_mcam_counter_stats(struct rvu *rvu,
struct npc_mcam_oper_counter_req *req,
struct npc_mcam_oper_counter_rsp *rsp);
+int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
+ struct npc_mcam_alloc_and_write_entry_req *req,
+ struct npc_mcam_alloc_and_write_entry_rsp *rsp);
#endif /* RVU_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 6d03c72..b74e5a6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -1804,3 +1804,75 @@ int rvu_mbox_handler_npc_mcam_counter_stats(struct rvu *rvu,
return 0;
}
+
+int rvu_mbox_handler_npc_mcam_alloc_and_write_entry(struct rvu *rvu,
+ struct npc_mcam_alloc_and_write_entry_req *req,
+ struct npc_mcam_alloc_and_write_entry_rsp *rsp)
+{
+ struct npc_mcam_alloc_counter_req cntr_req;
+ struct npc_mcam_alloc_counter_rsp cntr_rsp;
+ struct npc_mcam_alloc_entry_req entry_req;
+ struct npc_mcam_alloc_entry_rsp entry_rsp;
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ u16 entry = NPC_MCAM_ENTRY_INVALID;
+ u16 cntr = NPC_MCAM_ENTRY_INVALID;
+ int blkaddr, rc;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return NPC_MCAM_INVALID_REQ;
+
+ if (req->intf != NIX_INTF_RX && req->intf != NIX_INTF_TX)
+ return NPC_MCAM_INVALID_REQ;
+
+ /* Try to allocate a MCAM entry */
+ entry_req.hdr.pcifunc = req->hdr.pcifunc;
+ entry_req.contig = true;
+ entry_req.priority = req->priority;
+ entry_req.ref_entry = req->ref_entry;
+ entry_req.count = 1;
+
+ rc = rvu_mbox_handler_npc_mcam_alloc_entry(rvu,
+ &entry_req, &entry_rsp);
+ if (rc)
+ return rc;
+
+ if (!entry_rsp.count)
+ return NPC_MCAM_ALLOC_FAILED;
+
+ entry = entry_rsp.entry;
+
+ if (!req->alloc_cntr)
+ goto write_entry;
+
+ /* Now allocate counter */
+ cntr_req.hdr.pcifunc = req->hdr.pcifunc;
+ cntr_req.contig = true;
+ cntr_req.count = 1;
+
+ rc = rvu_mbox_handler_npc_mcam_alloc_counter(rvu, &cntr_req, &cntr_rsp);
+ if (rc) {
+ /* Free allocated MCAM entry */
+ mutex_lock(&mcam->lock);
+ mcam->entry2pfvf_map[entry] = 0;
+ npc_mcam_clear_bit(mcam, entry);
+ mutex_unlock(&mcam->lock);
+ return rc;
+ }
+
+ cntr = cntr_rsp.cntr;
+
+write_entry:
+ mutex_lock(&mcam->lock);
+ npc_config_mcam_entry(rvu, mcam, blkaddr, entry, req->intf,
+ &req->entry_data, req->enable_entry);
+
+ if (req->alloc_cntr)
+ npc_map_mcam_entry_and_cntr(rvu, mcam, blkaddr, entry, cntr);
+ mutex_unlock(&mcam->lock);
+
+ rsp->entry = entry;
+ rsp->cntr = cntr;
+
+ return 0;
+}
--
2.7.4
Powered by blists - more mailing lists