| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181116014139.25438-11-pablo@netfilter.org>
Date: Fri, 16 Nov 2018 02:41:39 +0100
From: Pablo Neira Ayuso <pablo@...filter.org>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, thomas.lendacky@....com, f.fainelli@...il.com,
ariel.elior@...ium.com, michael.chan@...adcom.com,
santosh@...lsio.com, madalin.bucur@....com,
yisen.zhuang@...wei.com, salil.mehta@...wei.com,
jeffrey.t.kirsher@...el.com, tariqt@...lanox.com,
saeedm@...lanox.com, jiri@...lanox.com, idosch@...lanox.com,
jakub.kicinski@...ronome.com, peppe.cavallaro@...com,
grygorii.strashko@...com, andrew@...n.ch,
vivien.didelot@...oirfairelinux.com, alexandre.torgue@...com,
joabreu@...opsys.com, linux-net-drivers@...arflare.com,
ganeshgr@...lsio.com
Subject: [PATCH 10/10] dsa: bcm_sf2: use flow_rule infrastructure
Update this driver to use the flow_rule infrastructure, hence we can use
the same code to populate hardware IR from ethtool_rx_flow and the
cls_flower interfaces.
Signed-off-by: Pablo Neira Ayuso <pablo@...filter.org>
---
drivers/net/dsa/bcm_sf2_cfp.c | 103 ++++++++++++++++++++++++++++--------------
1 file changed, 70 insertions(+), 33 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index e14663ab6dbc..26e1b41f424e 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -257,7 +257,8 @@ static int bcm_sf2_cfp_act_pol_set(struct bcm_sf2_priv *priv,
}
static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
- struct ethtool_tcpip4_spec *v4_spec,
+ struct flow_dissector_key_ipv4_addrs *addrs,
+ struct flow_dissector_key_ports *ports,
unsigned int slice_num,
bool mask)
{
@@ -278,7 +279,7 @@ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
* UDF_n_A6 [23:8]
* UDF_n_A5 [7:0]
*/
- reg = be16_to_cpu(v4_spec->pdst) >> 8;
+ reg = be16_to_cpu(ports->dst) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(3);
else
@@ -289,9 +290,9 @@ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
* UDF_n_A4 [23:8]
* UDF_n_A3 [7:0]
*/
- reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 |
- (u32)be16_to_cpu(v4_spec->psrc) << 8 |
- (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8;
+ reg = (be16_to_cpu(ports->dst) & 0xff) << 24 |
+ (u32)be16_to_cpu(ports->src) << 8 |
+ (be32_to_cpu(addrs->dst) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(2);
else
@@ -302,9 +303,9 @@ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
* UDF_n_A2 [23:8]
* UDF_n_A1 [7:0]
*/
- reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 |
- (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 |
- (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8;
+ reg = (u32)(be32_to_cpu(addrs->dst) & 0xff) << 24 |
+ (u32)(be32_to_cpu(addrs->dst) >> 16) << 8 |
+ (be32_to_cpu(addrs->src) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(1);
else
@@ -317,8 +318,8 @@ static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
* Slice ID [3:2]
* Slice valid [1:0]
*/
- reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 |
- (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 |
+ reg = (u32)(be32_to_cpu(addrs->src) & 0xff) << 24 |
+ (u32)(be32_to_cpu(addrs->src) >> 16) << 8 |
SLICE_NUM(slice_num) | SLICE_VALID;
if (mask)
offset = CORE_CFP_MASK_PORT(0);
@@ -335,6 +336,11 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
struct ethtool_tcpip4_spec *v4_spec, *v4_m_spec;
const struct cfp_udf_layout *layout;
unsigned int slice_num, rule_index;
+ struct flow_match_ipv4_addrs ipv4;
+ struct flow_match_ports ports;
+ struct flow_match_basic basic;
+ struct flow_rule *flow_rule;
+ struct flow_match_ip ip;
u8 ip_proto, ip_frag;
u8 num_udf;
u32 reg;
@@ -367,11 +373,22 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
if (rule_index > bcm_sf2_cfp_rule_size(priv))
return -ENOSPC;
+ flow_rule = ethtool_rx_flow_rule(fs);
+ if (!flow_rule)
+ return -ENOMEM;
+
+ flow_rule_match_ipv4_addrs(flow_rule, &ipv4);
+ flow_rule_match_ports(flow_rule, &ports);
+ flow_rule_match_basic(flow_rule, &basic);
+ flow_rule_match_ip(flow_rule, &ip);
+
layout = &udf_tcpip4_layout;
/* We only use one UDF slice for now */
slice_num = bcm_sf2_get_slice_number(layout, 0);
- if (slice_num == UDF_NUM_SLICES)
- return -EINVAL;
+ if (slice_num == UDF_NUM_SLICES) {
+ ret = -EINVAL;
+ goto out_err_flow_rule;
+ }
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
@@ -398,9 +415,10 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
* Reserved [1]
* UDF_Valid[8] [0]
*/
- core_writel(priv, v4_spec->tos << IPTOS_SHIFT |
- ip_proto << IPPROTO_SHIFT | ip_frag << IP_FRAG_SHIFT |
- udf_upper_bits(num_udf),
+ core_writel(priv, ip.key->tos << IPTOS_SHIFT |
+ basic.key->n_proto << IPPROTO_SHIFT |
+ ip_frag << IP_FRAG_SHIFT |
+ udf_upper_bits(num_udf),
CORE_CFP_DATA_PORT(6));
/* Mask with the specific layout for IPv4 packets */
@@ -417,8 +435,8 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Program the match and the mask */
- bcm_sf2_cfp_slice_ipv4(priv, v4_spec, slice_num, false);
- bcm_sf2_cfp_slice_ipv4(priv, v4_m_spec, SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num, false);
+ bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index);
@@ -426,14 +444,14 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index);
- return ret;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index, port_num,
queue_num, true);
if (ret)
- return ret;
+ goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
@@ -446,6 +464,10 @@ static int bcm_sf2_cfp_ipv4_rule_set(struct bcm_sf2_priv *priv, int port,
fs->location = rule_index;
return 0;
+
+out_err_flow_rule:
+ ethtool_rx_flow_rule_free(flow_rule);
+ return ret;
}
static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
@@ -584,6 +606,10 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
struct ethtool_tcpip6_spec *v6_spec, *v6_m_spec;
unsigned int slice_num, rule_index[2];
const struct cfp_udf_layout *layout;
+ struct flow_match_ipv6_addrs ipv6;
+ struct flow_match_ports ports;
+ struct flow_match_basic basic;
+ struct flow_rule *flow_rule;
u8 ip_proto, ip_frag;
int ret = 0;
u8 num_udf;
@@ -645,6 +671,15 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
goto out_err;
}
+ flow_rule = ethtool_rx_flow_rule(fs);
+ if (!flow_rule) {
+ ret = -ENOMEM;
+ goto out_err;
+ }
+ flow_rule_match_ipv6_addrs(flow_rule, &ipv6);
+ flow_rule_match_ports(flow_rule, &ports);
+ flow_rule_match_basic(flow_rule, &basic);
+
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, layout, slice_num);
@@ -668,7 +703,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
* Reserved [1]
* UDF_Valid[8] [0]
*/
- reg = 1 << L3_FRAMING_SHIFT | ip_proto << IPPROTO_SHIFT |
+ reg = 1 << L3_FRAMING_SHIFT | basic.key->n_proto << IPPROTO_SHIFT |
ip_frag << IP_FRAG_SHIFT | udf_upper_bits(num_udf);
core_writel(priv, reg, CORE_CFP_DATA_PORT(6));
@@ -688,10 +723,10 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Slice the IPv6 source address and port */
- bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6src, v6_spec->psrc,
- slice_num, false);
- bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6src, v6_m_spec->psrc,
- SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
+ ports.key->src, slice_num, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
+ ports.mask->src, SLICE_NUM_MASK, true);
/* Insert into TCAM now because we need to insert a second rule */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
@@ -699,20 +734,20 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[0]);
- goto out_err;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port_num,
queue_num, false);
if (ret)
- goto out_err;
+ goto out_err_flow_rule;
/* Now deal with the second slice to chain this rule */
slice_num = bcm_sf2_get_slice_number(layout, slice_num + 1);
if (slice_num == UDF_NUM_SLICES) {
ret = -EINVAL;
- goto out_err;
+ goto out_err_flow_rule;
}
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
@@ -748,10 +783,10 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
/* Mask all */
core_writel(priv, 0, CORE_CFP_MASK_PORT(5));
- bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6dst, v6_spec->pdst, slice_num,
- false);
- bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6dst, v6_m_spec->pdst,
- SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
+ ports.key->dst, slice_num, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
+ ports.key->dst, SLICE_NUM_MASK, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
@@ -759,7 +794,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[1]);
- goto out_err;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now, set chain ID to
@@ -768,7 +803,7 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[1], port_num,
queue_num, true);
if (ret)
- goto out_err;
+ goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
@@ -784,6 +819,8 @@ static int bcm_sf2_cfp_ipv6_rule_set(struct bcm_sf2_priv *priv, int port,
return ret;
+out_err_flow_rule:
+ ethtool_rx_flow_rule_free(flow_rule);
out_err:
clear_bit(rule_index[1], priv->cfp.used);
return ret;
--
2.11.0
Powered by blists - more mailing lists