| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1542593568.24219.5.camel@mhfsdcap03>
Date: Mon, 19 Nov 2018 10:12:48 +0800
From: biao huang <biao.huang@...iatek.com>
To: Sean Wang <sean.wang@...nel.org>
CC: "davem@...emloft.net" <davem@...emloft.net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Nelson Chang (張家祥)
<nelson.chang@...iatek.com>, "andrew@...n.ch" <andrew@...n.ch>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Liguo Zhang (张立国)
<Liguo.Zhang@...iatek.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Matthias Brugger" <matthias.bgg@...il.com>,
"joabreu@...opsys.com" <joabreu@...opsys.com>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
Honghui Zhang (张洪辉)
<Honghui.Zhang@...iatek.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [v3, PATCH 2/2] dt-binding: mediatek-dwmac: add binding
document for MediaTek MT2712 DWMAC
Dear Sean,
Thanks for your detailed comments~
On Sat, 2018-11-17 at 08:21 +0800, Sean Wang wrote:
> On Fri, Nov 16, 2018 at 1:19 AM Biao Huang <biao.huang@...iatek.com> wrote:
> >
> > The commit adds the device tree binding documentation for the MediaTek DWMAC
> > found on MediaTek MT2712.
> >
> > Change-Id: I3728666bf65927164bd82fa8dddb90df8270bd44
>
> Drop change-id
sorry, I forgot it. will remove in next version.
>
> > Signed-off-by: Biao Huang <biao.huang@...iatek.com>
> > ---
> > .../devicetree/bindings/net/mediatek-dwmac.txt | 77 ++++++++++++++++++++
> > 1 file changed, 77 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> >
> > diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> > new file mode 100644
> > index 0000000..7fd56e0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
> > @@ -0,0 +1,77 @@
> > +MediaTek DWMAC glue layer controller
> > +
> > +This file documents platform glue layer for stmmac.
> > +Please see stmmac.txt for the other unchanged properties.
> > +
> > +The device node has following properties.
> > +
> > +Required properties:
> > +- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC
> > +- reg: Address and length of the register set for the device
> > +- interrupts: Should contain the MAC interrupts
> > +- interrupt-names: Should contain a list of interrupt names corresponding to
> > + the interrupts in the interrupts property, if available.
> > + Should be "macirq" for the main MAC IRQ
> > +- clocks: Must contain a phandle for each entry in clock-names.
> > +- clock-names: The name of the clock listed in the clocks property. These are
> > + "axi", "apb", "mac_ext", "mac_parent", "ptp_ref", "ptp_parent", "ptp_top"
> > + for MT2712 SoC
>
> About not including these parent clocks to the controller, you can
> refer to assigned-clocks, assigned-clock-parents, assigned-clock-rates
> noted in Documentation/devicetree/bindings/clock/clock-bindings.txt to
> determine what speed these MUXs should be run at and see [1] as the
> example how applied in dts.
>
> [1]
> https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/mt7623.dtsi#L660
>
Got it, I'll remove parent info to dts.
> > +- mac-address: See ethernet.txt in the same directory
> > +- phy-mode: See ethernet.txt in the same directory
> > +
> > +Optional properties:
> > +- tx-delay: TX clock delay macro value. Range is 0~31. Default is 0.
> > + It should be defined for rgmii/rgmii-rxid/mii interface.
> > +- rx-delay: RX clock delay macro value. Range is 0~31. Default is 0.
> > + It should be defined for rgmii/rgmii-txid/mii/rmii interface.
> > +- fine-tune: This property will select coarse-tune delay or fine delay
> > + for rgmii interface.
> what is the property's type?
>
ok, property type info will be added in next version.
> > + If fine-tune delay is enabled, tx-delay/rx-delay is 170+/-50ps
> > + per stage.
> > + Else coarse-tune delay is enabled, tx-delay/rx-delay is 0.55+/-0.2ns
> > + per stage.
> > + This property do not apply to non-rgmii PHYs.
> > + Only coarse-tune delay is supported for mii/rmii PHYs.
> > +- rmii-rxc: Reference clock of rmii is from external PHYs,
> what is the property's type?
>
got it.
> > + and it can be connected to TXC or RXC pin on MT2712 SoC.
> > + If ref_clk <--> TXC, disable it.
> > + Else ref_clk <--> RXC, enable it.
> > +- txc-inverse: Inverse tx clock for mii/rgmii.
> what is the property's type?
>
> > + Inverse tx clock inside MAC relative to reference clock for rmii,
> > + and it rarely happen.
> > +- rxc-inverse: Inverse rx clock for mii/rgmii interfaces.
> what is the property's type?
>
got it.
> > + Inverse reference clock for rmii.
>
> If these optional properties look like generic enough, it would be
> good that place them to stmmac.txt. Otherwise, they should be added
> "mediatek," as the prefix string for these vendor-specific things.
>
it's mediatek-specific, and the prefix string will be added in next
version.
> > +
> > +Example:
> > + eth: ethernet@...1c000 {
> > + compatible = "mediatek,mt2712-gmac";
> > + reg = <0 0x1101c000 0 0x1300>;
> > + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-names = "macirq";
> > + phy-mode ="rgmii-id";
> > + mac-address = [00 55 7b b5 7d f7];
> > + clock-names = "axi",
> > + "apb",
> > + "mac_ext",
> > + "mac_parent",
> > + "ptp_ref",
> > + "ptp_parent",
> > + "ptp_top";
> > + clocks = <&pericfg CLK_PERI_GMAC>,
> > + <&pericfg CLK_PERI_GMAC_PCLK>,
> > + <&topckgen CLK_TOP_ETHER_125M_SEL>,
> > + <&topckgen CLK_TOP_ETHERPLL_125M>,
> > + <&topckgen CLK_TOP_ETHER_50M_SEL>,
> > + <&topckgen CLK_TOP_APLL1_D3>,
> > + <&topckgen CLK_TOP_APLL1>;
> > + snps,txpbl = <32>;
> > + snps,rxpbl = <32>;
> > + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
> > + snps,reset-active-low;
> > + tx-delay = <9>;
> > + rx-delay = <9>;
> > + fine-tune;
> > + rmii-rxc;
> > + txc-inverse;
> > + rxc-inverse;
> > + };
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists