[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1542624463-5868-13-git-send-email-sunil.kovvuri@gmail.com>
Date: Mon, 19 Nov 2018 16:17:34 +0530
From: sunil.kovvuri@...il.com
To: netdev@...r.kernel.org, davem@...emloft.net
Cc: arnd@...db.de, linux-soc@...r.kernel.org,
Tomasz Duszynski <tduszynski@...vell.com>,
Sunil Goutham <sgoutham@...vell.com>
Subject: [PATCH v3 12/21] octeontx2-af: Add support for stripping STAG/CTAG
From: Tomasz Duszynski <tduszynski@...vell.com>
This works by shadowing existing UCAST MCAM entry
with a new one additionally matching either NPC_LT_LB_CTAG
or NPC_LT_LB_STAG. For this to fully work one needs to
send properly configured NIX_VTAG_CFG message afterwards i.e with
strip and capture enabled and type set to 0.
On receiving tagged packet NIX will remove outer VLAN and capture
TCI in NIX_RX_PARSE_S.
Also simplified RX Vtag configuration flow
With this setting STRIP/CAPTURE VTAG actions separately would be
possible. Following combinations are possible: STRIP,
STRIP and CAPTURE, CAPTURE or nothing (0 disables respective actions).
Signed-off-by: Tomasz Duszynski <tduszynski@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 6 +-
drivers/net/ethernet/marvell/octeontx2/af/npc.h | 6 ++
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 8 +++
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 83 +++++++++++++++++-----
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 43 ++++++++++-
5 files changed, 125 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 39fe62a..3c38e32e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -197,7 +197,8 @@ M(NIX_SET_MAC_ADDR, 0x800a, nix_set_mac_addr, nix_set_mac_addr, msg_rsp) \
M(NIX_SET_RX_MODE, 0x800b, nix_set_rx_mode, nix_rx_mode, msg_rsp) \
M(NIX_SET_HW_FRS, 0x800c, nix_set_hw_frs, nix_frs_cfg, msg_rsp) \
M(NIX_LF_START_RX, 0x800d, nix_lf_start_rx, msg_req, msg_rsp) \
-M(NIX_LF_STOP_RX, 0x800e, nix_lf_stop_rx, msg_req, msg_rsp)
+M(NIX_LF_STOP_RX, 0x800e, nix_lf_stop_rx, msg_req, msg_rsp) \
+M(NIX_RXVLAN_ALLOC, 0x8012, nix_rxvlan_alloc, msg_req, msg_rsp)
/* Messages initiated by AF (range 0xC00 - 0xDFF) */
#define MBOX_UP_CGX_MESSAGES \
@@ -515,6 +516,7 @@ struct nix_txschq_config {
struct nix_vtag_config {
struct mbox_msghdr hdr;
+ /* '0' for 4 octet VTAG, '1' for 8 octet VTAG */
u8 vtag_size;
/* cfg_type is '0' for tx vlan cfg
* cfg_type is '1' for rx vlan cfg
@@ -535,7 +537,7 @@ struct nix_vtag_config {
/* valid when cfg_type is '1' */
struct {
- /* rx vtag type index */
+ /* rx vtag type index, valid values are in 0..7 range */
u8 vtag_type;
/* rx vtag strip */
u8 strip_vtag :1;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index f98b011..a7a20af 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -259,4 +259,10 @@ struct nix_rx_action {
#endif
};
+/* NIX Receive Vtag Action Structure */
+#define VTAG0_VALID_BIT BIT_ULL(15)
+#define VTAG0_TYPE_MASK GENMASK_ULL(14, 12)
+#define VTAG0_LID_MASK GENMASK_ULL(10, 8)
+#define VTAG0_RELPTR_MASK GENMASK_ULL(7, 0)
+
#endif /* NPC_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 19d5f16..9727164 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -142,6 +142,11 @@ struct rvu_pfvf {
/* Broadcast pkt replication info */
u16 bcast_mce_idx;
struct nix_mce_list bcast_mce_list;
+
+ /* VLAN offload */
+ struct mcam_entry entry;
+ int rxvlan_index;
+ bool rxvlan;
};
struct nix_txsch {
@@ -356,6 +361,8 @@ int rvu_mbox_handler_nix_stats_rst(struct rvu *rvu, struct msg_req *req,
int rvu_mbox_handler_nix_vtag_cfg(struct rvu *rvu,
struct nix_vtag_config *req,
struct msg_rsp *rsp);
+int rvu_mbox_handler_nix_rxvlan_alloc(struct rvu *rvu, struct msg_req *req,
+ struct msg_rsp *rsp);
int rvu_mbox_handler_nix_rss_flowkey_cfg(struct rvu *rvu,
struct nix_rss_flowkey_cfg *req,
struct msg_rsp *rsp);
@@ -384,6 +391,7 @@ void rvu_npc_disable_promisc_entry(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_enable_promisc_entry(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_install_bcast_match_entry(struct rvu *rvu, u16 pcifunc,
int nixlf, u64 chan);
+int rvu_npc_update_rxvlan(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_disable_mcam_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_disable_default_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_enable_default_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index fb8456e..a8d9fdf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -192,6 +192,7 @@ static void nix_interface_deinit(struct rvu *rvu, u16 pcifunc, u8 nixlf)
pfvf->maxlen = 0;
pfvf->minlen = 0;
+ pfvf->rxvlan = false;
/* Remove this PF_FUNC from bcast pkt replication list */
err = nix_update_bcast_mce_list(rvu, pcifunc, false);
@@ -1209,28 +1210,15 @@ int rvu_mbox_handler_nix_txschq_cfg(struct rvu *rvu,
static int nix_rx_vtag_cfg(struct rvu *rvu, int nixlf, int blkaddr,
struct nix_vtag_config *req)
{
- u64 regval = 0;
+ u64 regval = req->vtag_size;
-#define NIX_VTAGTYPE_MAX 0x8ull
-#define NIX_VTAGSIZE_MASK 0x7ull
-#define NIX_VTAGSTRIP_CAP_MASK 0x30ull
-
- if (req->rx.vtag_type >= NIX_VTAGTYPE_MAX ||
- req->vtag_size > VTAGSIZE_T8)
+ if (req->rx.vtag_type > 7 || req->vtag_size > VTAGSIZE_T8)
return -EINVAL;
- regval = rvu_read64(rvu, blkaddr,
- NIX_AF_LFX_RX_VTAG_TYPEX(nixlf, req->rx.vtag_type));
-
- if (req->rx.strip_vtag && req->rx.capture_vtag)
- regval |= BIT_ULL(4) | BIT_ULL(5);
- else if (req->rx.strip_vtag)
+ if (req->rx.capture_vtag)
+ regval |= BIT_ULL(5);
+ if (req->rx.strip_vtag)
regval |= BIT_ULL(4);
- else
- regval &= ~(BIT_ULL(4) | BIT_ULL(5));
-
- regval &= ~NIX_VTAGSIZE_MASK;
- regval |= req->vtag_size & NIX_VTAGSIZE_MASK;
rvu_write64(rvu, blkaddr,
NIX_AF_LFX_RX_VTAG_TYPEX(nixlf, req->rx.vtag_type), regval);
@@ -1770,6 +1758,9 @@ int rvu_mbox_handler_nix_set_mac_addr(struct rvu *rvu,
rvu_npc_install_ucast_entry(rvu, pcifunc, nixlf,
pfvf->rx_chan_base, req->mac_addr);
+
+ rvu_npc_update_rxvlan(rvu, pcifunc, nixlf);
+
return 0;
}
@@ -1803,6 +1794,9 @@ int rvu_mbox_handler_nix_set_rx_mode(struct rvu *rvu, struct nix_rx_mode *req,
else
rvu_npc_install_promisc_entry(rvu, pcifunc, nixlf,
pfvf->rx_chan_base, allmulti);
+
+ rvu_npc_update_rxvlan(rvu, pcifunc, nixlf);
+
return 0;
}
@@ -1941,6 +1935,59 @@ int rvu_mbox_handler_nix_set_hw_frs(struct rvu *rvu, struct nix_frs_cfg *req,
return 0;
}
+int rvu_mbox_handler_nix_rxvlan_alloc(struct rvu *rvu, struct msg_req *req,
+ struct msg_rsp *rsp)
+{
+ struct npc_mcam_alloc_entry_req alloc_req = { };
+ struct npc_mcam_alloc_entry_rsp alloc_rsp = { };
+ struct npc_mcam_free_entry_req free_req = { };
+ u16 pcifunc = req->hdr.pcifunc;
+ int blkaddr, nixlf, err;
+ struct rvu_pfvf *pfvf;
+
+ pfvf = rvu_get_pfvf(rvu, pcifunc);
+ if (pfvf->rxvlan)
+ return 0;
+
+ /* alloc new mcam entry */
+ alloc_req.hdr.pcifunc = pcifunc;
+ alloc_req.count = 1;
+
+ err = rvu_mbox_handler_npc_mcam_alloc_entry(rvu, &alloc_req,
+ &alloc_rsp);
+ if (err)
+ return err;
+
+ /* update entry to enable rxvlan offload */
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, pcifunc);
+ if (blkaddr < 0) {
+ err = NIX_AF_ERR_AF_LF_INVALID;
+ goto free_entry;
+ }
+
+ nixlf = rvu_get_lf(rvu, &rvu->hw->block[blkaddr], pcifunc, 0);
+ if (nixlf < 0) {
+ err = NIX_AF_ERR_AF_LF_INVALID;
+ goto free_entry;
+ }
+
+ pfvf->rxvlan_index = alloc_rsp.entry_list[0];
+ /* all it means is that rxvlan_index is valid */
+ pfvf->rxvlan = true;
+
+ err = rvu_npc_update_rxvlan(rvu, pcifunc, nixlf);
+ if (err)
+ goto free_entry;
+
+ return 0;
+free_entry:
+ free_req.hdr.pcifunc = pcifunc;
+ free_req.entry = alloc_rsp.entry_list[0];
+ rvu_mbox_handler_npc_mcam_free_entry(rvu, &free_req, rsp);
+ pfvf->rxvlan = false;
+ return err;
+}
+
static void nix_link_config(struct rvu *rvu, int blkaddr)
{
struct rvu_hwinfo *hw = rvu->hw;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index af51352..7383140 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -306,6 +307,7 @@ static u64 npc_get_mcam_action(struct rvu *rvu, struct npc_mcam *mcam,
void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
int nixlf, u64 chan, u8 *mac_addr)
{
+ struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc);
struct npc_mcam *mcam = &rvu->hw->mcam;
struct mcam_entry entry = { {0} };
struct nix_rx_action action;
@@ -345,6 +347,17 @@ void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
entry.action = *(u64 *)&action;
npc_config_mcam_entry(rvu, mcam, blkaddr, index,
NIX_INTF_RX, &entry, true);
+
+ /* add VLAN matching, setup action and save entry back for later */
+ entry.kw[0] |= (NPC_LT_LB_STAG | NPC_LT_LB_CTAG) << 20;
+ entry.kw_mask[0] |= (NPC_LT_LB_STAG & NPC_LT_LB_CTAG) << 20;
+
+ entry.vtag_action = VTAG0_VALID_BIT |
+ FIELD_PREP(VTAG0_TYPE_MASK, 0) |
+ FIELD_PREP(VTAG0_LID_MASK, NPC_LID_LA) |
+ FIELD_PREP(VTAG0_RELPTR_MASK, 12);
+
+ memcpy(&pfvf->entry, &entry, sizeof(entry));
}
void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
@@ -352,7 +365,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc,
{
struct npc_mcam *mcam = &rvu->hw->mcam;
struct mcam_entry entry = { {0} };
- struct nix_rx_action action;
+ struct nix_rx_action action = { };
int blkaddr, index, kwi;
blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
@@ -521,6 +534,8 @@ void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf,
rvu_write64(rvu, blkaddr,
NPC_AF_MCAMEX_BANKX_ACTION(index, bank), *(u64 *)&action);
+
+ rvu_npc_update_rxvlan(rvu, pcifunc, nixlf);
}
static void npc_enadis_default_entries(struct rvu *rvu, u16 pcifunc,
@@ -560,6 +575,8 @@ static void npc_enadis_default_entries(struct rvu *rvu, u16 pcifunc,
rvu_npc_enable_promisc_entry(rvu, pcifunc, nixlf);
else
rvu_npc_disable_promisc_entry(rvu, pcifunc, nixlf);
+
+ rvu_npc_update_rxvlan(rvu, pcifunc, nixlf);
}
void rvu_npc_disable_default_entries(struct rvu *rvu, u16 pcifunc, int nixlf)
@@ -2018,3 +2035,27 @@ int rvu_mbox_handler_npc_get_kex_cfg(struct rvu *rvu, struct msg_req *req,
}
return 0;
}
+
+int rvu_npc_update_rxvlan(struct rvu *rvu, u16 pcifunc, int nixlf)
+{
+ struct rvu_pfvf *pfvf = rvu_get_pfvf(rvu, pcifunc);
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ int blkaddr, index;
+ bool enable;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return NIX_AF_ERR_AF_LF_INVALID;
+
+ if (!pfvf->rxvlan)
+ return 0;
+
+ index = npc_get_nixlf_mcam_index(mcam, pcifunc, nixlf,
+ NIXLF_UCAST_ENTRY);
+ pfvf->entry.action = npc_get_mcam_action(rvu, mcam, blkaddr, index);
+ enable = is_mcam_entry_enabled(rvu, mcam, blkaddr, index);
+ npc_config_mcam_entry(rvu, mcam, blkaddr, pfvf->rxvlan_index,
+ NIX_INTF_RX, &pfvf->entry, enable);
+
+ return 0;
+}
--
2.7.4
Powered by blists - more mailing lists