[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d410282c6b7539bec2f916a440ce1c3b1aad44f7.1542794577.git.igor.russkikh@aquantia.com>
Date: Wed, 21 Nov 2018 10:13:33 +0000
From: Igor Russkikh <Igor.Russkikh@...antia.com>
To: "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"davem@...emloft.net" <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: "andrew@...n.ch" <andrew@...n.ch>,
Dmitry Bezrukov <Dmitry.Bezrukov@...antia.com>,
Igor Russkikh <Igor.Russkikh@...antia.com>
Subject: [PATCH v3 net-next 06/21] net: usb: aqc111: Introduce link management
From: Dmitry Bezrukov <dmitry.bezrukov@...antia.com>
Add full hardware initialization sequence and link configuration logic
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@...antia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@...antia.com>
---
drivers/net/usb/aqc111.c | 235 +++++++++++++++++++++++++++++++++++++++
drivers/net/usb/aqc111.h | 13 +++
2 files changed, 248 insertions(+)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index e277209df616..e33be16b506c 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -157,6 +157,53 @@ static int aqc111_write32_cmd(struct usbnet *dev, u8 cmd, u16 value,
return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
}
+static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
+{
+ struct aqc111_data *aqc111_data = dev->driver_priv;
+
+ aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
+ aqc111_data->phy_cfg |= AQ_PAUSE;
+ aqc111_data->phy_cfg |= AQ_ASYM_PAUSE;
+ aqc111_data->phy_cfg |= AQ_DOWNSHIFT;
+ aqc111_data->phy_cfg &= ~AQ_DSH_RETRIES_MASK;
+ aqc111_data->phy_cfg |= (3 << AQ_DSH_RETRIES_SHIFT) &
+ AQ_DSH_RETRIES_MASK;
+
+ if (autoneg == AUTONEG_ENABLE) {
+ switch (speed) {
+ case SPEED_5000:
+ aqc111_data->phy_cfg |= AQ_ADV_5G;
+ /* fall-through */
+ case SPEED_2500:
+ aqc111_data->phy_cfg |= AQ_ADV_2G5;
+ /* fall-through */
+ case SPEED_1000:
+ aqc111_data->phy_cfg |= AQ_ADV_1G;
+ /* fall-through */
+ case SPEED_100:
+ aqc111_data->phy_cfg |= AQ_ADV_100M;
+ /* fall-through */
+ }
+ } else {
+ switch (speed) {
+ case SPEED_5000:
+ aqc111_data->phy_cfg |= AQ_ADV_5G;
+ break;
+ case SPEED_2500:
+ aqc111_data->phy_cfg |= AQ_ADV_2G5;
+ break;
+ case SPEED_1000:
+ aqc111_data->phy_cfg |= AQ_ADV_1G;
+ break;
+ case SPEED_100:
+ aqc111_data->phy_cfg |= AQ_ADV_100M;
+ break;
+ }
+ }
+
+ aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg);
+}
+
static const struct net_device_ops aqc111_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
@@ -179,6 +226,7 @@ static void aqc111_read_fw_version(struct usbnet *dev,
static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
+ enum usb_device_speed usb_speed = udev->speed;
struct aqc111_data *aqc111_data;
int ret;
@@ -206,6 +254,9 @@ static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->netdev_ops = &aqc111_netdev_ops;
aqc111_read_fw_version(dev, aqc111_data);
+ aqc111_data->autoneg = AUTONEG_ENABLE;
+ aqc111_data->advertised_speed = (usb_speed == USB_SPEED_SUPER) ?
+ SPEED_5000 : SPEED_1000;
return 0;
}
@@ -224,6 +275,7 @@ static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
2, ®16);
/* Power down ethernet PHY */
+ aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
aqc111_data->phy_cfg |= AQ_LOW_POWER;
aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
@@ -232,6 +284,179 @@ static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
kfree(aqc111_data);
}
+static void aqc111_status(struct usbnet *dev, struct urb *urb)
+{
+ struct aqc111_data *aqc111_data = dev->driver_priv;
+ u64 *event_data = NULL;
+ int link = 0;
+
+ if (urb->actual_length < sizeof(*event_data))
+ return;
+
+ event_data = urb->transfer_buffer;
+ le64_to_cpus(event_data);
+
+ if (*event_data & AQ_LS_MASK)
+ link = 1;
+ else
+ link = 0;
+
+ aqc111_data->link_speed = (*event_data & AQ_SPEED_MASK) >>
+ AQ_SPEED_SHIFT;
+ aqc111_data->link = link;
+
+ if (netif_carrier_ok(dev->net) != link)
+ usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+}
+
+static void aqc111_configure_rx(struct usbnet *dev,
+ struct aqc111_data *aqc111_data)
+{
+ enum usb_device_speed usb_speed = dev->udev->speed;
+ u16 link_speed = 0, usb_host = 0;
+ u8 buf[5] = { 0 };
+ u8 queue_num = 0;
+ u16 reg16 = 0;
+ u8 reg8 = 0;
+
+ buf[0] = 0x00;
+ buf[1] = 0xF8;
+ buf[2] = 0x07;
+ switch (aqc111_data->link_speed) {
+ case AQ_INT_SPEED_5G:
+ link_speed = 5000;
+ reg8 = 0x05;
+ reg16 = 0x001F;
+ break;
+ case AQ_INT_SPEED_2_5G:
+ link_speed = 2500;
+ reg16 = 0x003F;
+ break;
+ case AQ_INT_SPEED_1G:
+ link_speed = 1000;
+ reg16 = 0x009F;
+ break;
+ case AQ_INT_SPEED_100M:
+ link_speed = 100;
+ queue_num = 1;
+ reg16 = 0x063F;
+ buf[1] = 0xFB;
+ buf[2] = 0x4;
+ break;
+ }
+
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_INTER_PACKET_GAP_0,
+ 1, 1, ®8);
+
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TX_PAUSE_RESEND_T, 3, 3, buf);
+
+ switch (usb_speed) {
+ case USB_SPEED_SUPER:
+ usb_host = 3;
+ break;
+ case USB_SPEED_HIGH:
+ usb_host = 2;
+ break;
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ usb_host = 1;
+ queue_num = 0;
+ break;
+ default:
+ usb_host = 0;
+ break;
+ }
+
+ memcpy(buf, &AQC111_BULKIN_SIZE[queue_num], 5);
+ /* RX bulk configuration */
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL, 5, 5, buf);
+
+ /* Set high low water level */
+ reg16 = 0x0810;
+
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW,
+ 2, ®16);
+ netdev_info(dev->net, "Link Speed %d, USB %d", link_speed, usb_host);
+}
+
+static int aqc111_link_reset(struct usbnet *dev)
+{
+ struct aqc111_data *aqc111_data = dev->driver_priv;
+ u16 reg16 = 0;
+ u8 reg8 = 0;
+
+ if (aqc111_data->link == 1) { /* Link up */
+ aqc111_configure_rx(dev, aqc111_data);
+
+ /* Vlan Tag Filter */
+ reg8 = SFR_VLAN_CONTROL_VSO;
+
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL,
+ 1, 1, ®8);
+
+ reg8 = 0x0;
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL,
+ 1, 1, ®8);
+
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMTX_DMA_CONTROL,
+ 1, 1, ®8);
+
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ARC_CTRL, 1, 1, ®8);
+
+ reg16 = SFR_RX_CTL_IPE | SFR_RX_CTL_AB;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
+
+ reg8 = SFR_RX_PATH_READY;
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH,
+ 1, 1, ®8);
+
+ reg8 = SFR_BULK_OUT_EFF_EN;
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+ 1, 1, ®8);
+
+ reg16 = 0;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+
+ reg16 = SFR_MEDIUM_XGMIIMODE | SFR_MEDIUM_FULL_DUPLEX;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+
+ aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+
+ reg16 |= SFR_MEDIUM_RECEIVE_EN | SFR_MEDIUM_RXFLOW_CTRLEN |
+ SFR_MEDIUM_TXFLOW_CTRLEN;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+
+ reg16 = SFR_RX_CTL_IPE | SFR_RX_CTL_AB | SFR_RX_CTL_START;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
+
+ netif_carrier_on(dev->net);
+ } else {
+ aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+ reg16 &= ~SFR_MEDIUM_RECEIVE_EN;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+ 2, ®16);
+
+ aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
+ reg16 &= ~SFR_RX_CTL_START;
+ aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, ®16);
+
+ reg8 = SFR_BULK_OUT_FLUSH_EN | SFR_BULK_OUT_EFF_EN;
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+ 1, 1, ®8);
+ reg8 = SFR_BULK_OUT_EFF_EN;
+ aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+ 1, 1, ®8);
+
+ netif_carrier_off(dev->net);
+ }
+ return 0;
+}
+
static int aqc111_reset(struct usbnet *dev)
{
struct aqc111_data *aqc111_data = dev->driver_priv;
@@ -254,6 +479,12 @@ static int aqc111_reset(struct usbnet *dev)
SFR_MONITOR_MODE_RW_FLAG);
aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, ®8);
+ netif_carrier_off(dev->net);
+
+ /* Phy advertise */
+ aqc111_set_phy_speed(dev, aqc111_data->autoneg,
+ aqc111_data->advertised_speed);
+
return 0;
}
@@ -275,6 +506,8 @@ static int aqc111_stop(struct usbnet *dev)
aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
&aqc111_data->phy_cfg);
+ netif_carrier_off(dev->net);
+
return 0;
}
@@ -282,6 +515,8 @@ static const struct driver_info aqc111_info = {
.description = "Aquantia AQtion USB to 5GbE Controller",
.bind = aqc111_bind,
.unbind = aqc111_unbind,
+ .status = aqc111_status,
+ .link_reset = aqc111_link_reset,
.reset = aqc111_reset,
.stop = aqc111_stop,
};
diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h
index a93d34af76b9..f3b45d8ca4e3 100644
--- a/drivers/net/usb/aqc111.h
+++ b/drivers/net/usb/aqc111.h
@@ -113,6 +113,7 @@
#define AQ_ADV_1G BIT(1)
#define AQ_ADV_2G5 BIT(2)
#define AQ_ADV_5G BIT(3)
+#define AQ_ADV_MASK 0x0F
#define AQ_PAUSE BIT(16)
#define AQ_ASYM_PAUSE BIT(17)
@@ -127,6 +128,10 @@
/******************************************************************************/
struct aqc111_data {
+ u8 link_speed;
+ u8 link;
+ u8 autoneg;
+ u32 advertised_speed;
struct {
u8 major;
u8 minor;
@@ -135,6 +140,14 @@ struct aqc111_data {
u32 phy_cfg;
};
+#define AQ_LS_MASK 0x8000
+#define AQ_SPEED_MASK 0x7F00
+#define AQ_SPEED_SHIFT 0x0008
+#define AQ_INT_SPEED_5G 0x000F
+#define AQ_INT_SPEED_2_5G 0x0010
+#define AQ_INT_SPEED_1G 0x0011
+#define AQ_INT_SPEED_100M 0x0013
+
static struct {
unsigned char ctrl;
unsigned char timer_l;
--
2.17.1
Powered by blists - more mailing lists