| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181123161359.13342-7-sven@narfation.org>
Date: Fri, 23 Nov 2018 17:13:46 +0100
From: Sven Eckelmann <sven@...fation.org>
To: b.a.t.m.a.n@...ts.open-mesh.org
Cc: Jiri Pirko <jiri@...lanox.com>, netdev@...r.kernel.org,
Sven Eckelmann <sven@...fation.org>
Subject: [RFC v2 06/19] batman-adv: Add ap_isolation mesh/vlan genl configuration
The mesh interface can drop messages between clients to implement a
mesh-wide AP isolation.
The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and
BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the
configuration of this feature using the BATADV_ATTR_AP_ISOLATION attribute.
Setting the u8 to zero will disable this feature and setting it to
something else is enabling this feature.
This feature also requires that skbuff which should be handled as isolated
are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to
set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK
and BATADV_ATTR_ISOLATION_MASK.
Cc: Jiri Pirko <jiri@...lanox.com>
Signed-off-by: Sven Eckelmann <sven@...fation.org>
---
include/uapi/linux/batman_adv.h | 18 +++++++
net/batman-adv/netlink.c | 88 +++++++++++++++++++++++++++++++++
2 files changed, 106 insertions(+)
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index a01d90ed..75738032 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -356,6 +356,24 @@ enum batadv_nl_attrs {
*/
BATADV_ATTR_AGGREGATED_OGMS,
+ /**
+ * @BATADV_ATTR_AP_ISOLATION: whether the data traffic going from a
+ * wireless client to another wireless client will be silently dropped.
+ */
+ BATADV_ATTR_AP_ISOLATION,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MARK,
+
+ /**
+ * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+ * classify clients as "isolated" by the Extended Isolation feature.
+ */
+ BATADV_ATTR_ISOLATION_MASK,
+
/* add attributes above here, update the policy in netlink.c */
/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 862d47c4..217c4b30 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -140,6 +140,9 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
[BATADV_ATTR_MCAST_FLAGS_PRIV] = { .type = NLA_U32 },
[BATADV_ATTR_VLANID] = { .type = NLA_U16 },
[BATADV_ATTR_AGGREGATED_OGMS] = { .type = NLA_U8 },
+ [BATADV_ATTR_AP_ISOLATION] = { .type = NLA_U8 },
+ [BATADV_ATTR_ISOLATION_MARK] = { .type = NLA_U32 },
+ [BATADV_ATTR_ISOLATION_MASK] = { .type = NLA_U32 },
};
/**
@@ -157,6 +160,51 @@ batadv_netlink_get_ifindex(const struct nlmsghdr *nlh, int attrtype)
return attr ? nla_get_u32(attr) : 0;
}
+/**
+ * batadv_netlink_mesh_put_ap_isolation() - Add ap_isolation softif attribute
+ * @msg: Netlink message to dump into
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_mesh_put_ap_isolation(struct sk_buff *msg,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+ u8 ap_isolation;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return 0;
+
+ ap_isolation = atomic_read(&vlan->ap_isolation);
+ batadv_softif_vlan_put(vlan);
+
+ return nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION, !!ap_isolation);
+}
+
+/**
+ * batadv_option_set_ap_isolation() - Set ap_isolation from genl msg
+ * @attr: parsed BATADV_ATTR_AP_ISOLATION attribute
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_netlink_set_mesh_ap_isolation(struct nlattr *attr,
+ struct batadv_priv *bat_priv)
+{
+ struct batadv_softif_vlan *vlan;
+
+ vlan = batadv_softif_vlan_get(bat_priv, BATADV_NO_FLAGS);
+ if (!vlan)
+ return -ENOENT;
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ batadv_softif_vlan_put(vlan);
+
+ return 0;
+}
+
/**
* batadv_netlink_mesh_put() - Fill message with mesh attributes
* @msg: Netlink message to dump into
@@ -219,6 +267,17 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
!!atomic_read(&bat_priv->aggregated_ogms)))
goto nla_put_failure;
+ if (batadv_netlink_mesh_put_ap_isolation(msg, bat_priv))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MARK,
+ bat_priv->isolation_mark))
+ goto nla_put_failure;
+
+ if (nla_put_u32(msg, BATADV_ATTR_ISOLATION_MASK,
+ bat_priv->isolation_mark_mask))
+ goto nla_put_failure;
+
batadv_hardif_put(primary_if);
genlmsg_end(msg, hdr);
@@ -308,6 +367,24 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
}
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION];
+
+ batadv_netlink_set_mesh_ap_isolation(attr, bat_priv);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MARK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MARK];
+
+ bat_priv->isolation_mark = nla_get_u32(attr);
+ }
+
+ if (info->attrs[BATADV_ATTR_ISOLATION_MASK]) {
+ attr = info->attrs[BATADV_ATTR_ISOLATION_MASK];
+
+ bat_priv->isolation_mark_mask = nla_get_u32(attr);
+ }
+
batadv_netlink_notify_mesh(bat_priv);
return 0;
@@ -704,6 +781,10 @@ static int batadv_netlink_vlan_put(struct sk_buff *msg,
if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
goto nla_put_failure;
+ if (nla_put_u8(msg, BATADV_ATTR_AP_ISOLATION,
+ !!atomic_read(&vlan->ap_isolation)))
+ goto nla_put_failure;
+
genlmsg_end(msg, hdr);
return 0;
@@ -784,6 +865,13 @@ static int batadv_netlink_set_vlan(struct sk_buff *skb, struct genl_info *info)
{
struct batadv_softif_vlan *vlan = info->user_ptr[1];
struct batadv_priv *bat_priv = info->user_ptr[0];
+ struct nlattr *attr;
+
+ if (info->attrs[BATADV_ATTR_AP_ISOLATION]) {
+ attr = info->attrs[BATADV_ATTR_AP_ISOLATION];
+
+ atomic_set(&vlan->ap_isolation, !!nla_get_u8(attr));
+ }
batadv_netlink_notify_vlan(bat_priv, vlan);
--
2.19.1
Powered by blists - more mailing lists