netdev - [RFC v2 13/19] batman-adv: Add log_level mesh genl configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 23 Nov 2018 17:13:53 +0100
From:   Sven Eckelmann <sven@...fation.org>
To:     b.a.t.m.a.n@...ts.open-mesh.org
Cc:     Jiri Pirko <jiri@...lanox.com>, netdev@...r.kernel.org,
        Sven Eckelmann <sven@...fation.org>
Subject: [RFC v2 13/19] batman-adv: Add log_level mesh genl configuration

In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.

Cc: Jiri Pirko <jiri@...lanox.com>
Signed-off-by: Sven Eckelmann <sven@...fation.org>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b6d0eaf6..1c7d325f 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -448,6 +448,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_HOP_PENALTY,
 
+	/**
+	 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+	 *  should be send to the debug log/trace ring buffer
+	 */
+	BATADV_ATTR_LOG_LEVEL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 4d3a23df..a38e28e3 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "log.h"
 #include "multicast.h"
 #include "originator.h"
 #include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
+	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 };
 
 /**
@@ -334,6 +336,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
 		       atomic_read(&bat_priv->hop_penalty)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+			atomic_read(&bat_priv->log_level)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_hardif_put(primary_if);
 
 	genlmsg_end(msg, hdr);
@@ -545,6 +553,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+		attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+		atomic_set(&bat_priv->log_level,
+			   nla_get_u32(attr) & BATADV_DBG_ALL);
+	}
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.19.1