netdev - [PATCH v2] net: stmmac: Move debugfs init/exit to ->probe()/->remove()

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181127132143.10473-1-thierry.reding@gmail.com>
Date:   Tue, 27 Nov 2018 14:21:43 +0100
From:   Thierry Reding <thierry.reding@...il.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Jose Abreu <joabreu@...opsys.com>, netdev@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] net: stmmac: Move debugfs init/exit to ->probe()/->remove()

From: Thierry Reding <treding@...dia.com>

Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:

    [  752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
    [  752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration

The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.

Note that the ring descriptors cannot be read while the interface is
down, so make sure to return an empty file when the descriptors_status
debugfs file is read.

Signed-off-by: Thierry Reding <treding@...dia.com>
---
This applies on top of net-next.

Changes in v2:
- avoid access to ring descriptors when interface is down

 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++++++++++--------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 076a8be18d67..5551fead8f66 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2550,12 +2550,6 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 			netdev_warn(priv->dev, "PTP init failed\n");
 	}
 
-#ifdef CONFIG_DEBUG_FS
-	ret = stmmac_init_fs(dev);
-	if (ret < 0)
-		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
-			    __func__);
-#endif
 	priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
 
 	if (priv->use_riwt) {
@@ -2756,10 +2750,6 @@ static int stmmac_release(struct net_device *dev)
 
 	netif_carrier_off(dev);
 
-#ifdef CONFIG_DEBUG_FS
-	stmmac_exit_fs(dev);
-#endif
-
 	stmmac_release_ptp(priv);
 
 	return 0;
@@ -3899,6 +3889,9 @@ static int stmmac_sysfs_ring_read(struct seq_file *seq, void *v)
 	u32 tx_count = priv->plat->tx_queues_to_use;
 	u32 queue;
 
+	if ((dev->flags & IFF_UP) == 0)
+		return 0;
+
 	for (queue = 0; queue < rx_count; queue++) {
 		struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue];
 
@@ -4397,6 +4390,13 @@ int stmmac_dvr_probe(struct device *device,
 		goto error_netdev_register;
 	}
 
+#ifdef CONFIG_DEBUG_FS
+	ret = stmmac_init_fs(ndev);
+	if (ret < 0)
+		netdev_warn(priv->dev, "%s: failed debugFS registration\n",
+			    __func__);
+#endif
+
 	return ret;
 
 error_netdev_register:
@@ -4432,6 +4432,9 @@ int stmmac_dvr_remove(struct device *dev)
 
 	netdev_info(priv->dev, "%s: removing driver", __func__);
 
+#ifdef CONFIG_DEBUG_FS
+	stmmac_exit_fs(ndev);
+#endif
 	stmmac_stop_all_dma(priv);
 
 	stmmac_mac_set(priv, priv->ioaddr, false);
-- 
2.19.1